Drying Process----drier

Our rotary dryer is made up of Stove and Main Rotary Dryer, which can realize to reduce the moisture from 60% to 10%.

Drying Process:
The best moisture content to pelletizing is about 13-15%. Our rotary dryer is made up of Stove and Main Rotary Dryer, which can realize to reduce the moisture from 60% to 10%. Our stove is fueled by sawdust, wasted wood, coal, which can save electricity consumption largely.
Our is specially designed for energy saving purpose, the outside of the dryer is covered with special cotton material sheet to prevent the heat outrunning.

Drier:
Technical parameters:
Rotary dryer is the choice for high throughput capacity applications involving high moisture, friable, free-flowing commodity products and by-products. A rotating drum and strategically positioned flights combine to lift and shower product evenly through the air stream. Thermostatically controlled discharge air temperature assures precise final moistures and great sensitivity to varying product conditions. Single-pass or three-pass configurations are available to match product characteristics. Heating options include steam, gas, oil, thermal oil and auxiliary
After the damp raw material is put into the dryer from on end, it is turned over through string-up rake inside the cylinder and distributed uniform in the dryer and contacted with countercurrent hot air fully. It speeds up heat and mass conducting of dry. During the oeriod of dry. raw material is effected by stirring-up rake with gradient and hot air. it can be moved and passed through the dry region and to star valve and then discharge the finished product.
Technical parameters:
Model
Diameter (mm)
Length(m)
Power(kw)
revolution(r/min)
HZG6
600
4,5,6,7,8
3-5.5
3-20 adjustment
HZG8
800
4,5,6,7,8,9,10
5.5-7.5
HZG10
1000
6,7,8,9,10,11,12
5.5-7.5
HZG12
1200
6,8,10,12,14,16
7.5-11