Drying plant

Drying plant:
1good quality
2low energy consumption
3low cost
4high efficiency

Dryer plant
Drying is important before briquetting process. To get the superior quality of biomass briquettes with high density, it is necessary to control the moisture of material at 8-12% exactly. The selection of drying plant models depends on the original moisture content of raw materials


Wood dryer is suitable for drying materials like sawdust, rice hull, milling wheat straw, corn stalks and so on.
The moisture of wet materials is at 20-30%. The wood dryer is equipped one fuel boiler, inlet, steel pipe, exhaust blower (fan), cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are expelled out by the exhaust blower (fan). This wood dryer reduces the moisture to 8-12% with the advantages of lower cost consumption and high efficiency.

Model
Power (kw)
Capacity (kg/h)
Net/Gross Weight (kg)
Raw materials Diameter(mm)
Packing Dimension(m³)
HGJ-I
4
300-400
1000/1100
<1mm & < 5mm
6.36
HGJ-II
7.5+0.75+0.75
500-600
2040/2260
<1mm & < 5mm
12.41
HGJ-III
11+0.75+075+5
700-800
2850/3080
<1mm & < 5mm
13.59
HGJ-IV
15+0.75+0.75
1000-1200
2850/3080
<1mm & < 5mm
13.59