Rotary Drier advantages:
1.Reasonable structure,
2.High efficiency,
3.Low energy consumption
4.Suitable for many fields.
Rotary Drier
Rotary drier is widely used for drying materials in industries like cement, mine, building materials, chemistry, food and fertilizer, etc. This rotary drying machine comes with thermocouples on the feeding and discharging device to control the temperature. Thermometers are also adopted so as to better control the working temperature (generally 350-380°) of the rotary drier.
Components:
Rotary drier is mainly composed of cylinder, under frame, feeding and discharging devices, transmission device, gear cover, etc. (Optional auxiliary equipment includes combustion chamber, feeder and discharging device, and dust collection equipment). Rotary drier manufactured by us adopts new lifting plate, which is of functions like guiding, current-sharing, and material raising. The materials are raised and evenly drop so that they are in full contact with heat for better drying efficiency. Our rotary drier is designed with the best working conditions, which enables it to save 10-15% of energy and increase 10-15% of productivity compared with common dryers.
Working Principle:
The auto-combustion device provides heat resource for our rotary drier, which adopts down-flow heating method. When the mineral materials are fed into the cylinder, it flows down as a result of gravity. Meanwhile, they are repetitively scattered in the air so that they are in full contact with the hot air. The material is thus dried gradually.
Technical Parameters:
Model (mm)
Inclination (%)
Rotate speed (r/min)
Air inlet temperature (°C)
Power (kw)
Production capacity(t/h)
Weight (t)
600x6000
3-5
3-8
≤700
3
0.5-1.5
2.9
800x8000
3-5
3-8
≤700
4
0.8-2.0
3.5
800x10000
3-5
3-8
≤700
4
0.8-2.5
4.5
1000x10000
3-5
3-8
≤700
5.5
1.0-3.5
5.6
1200x10000
3-5
3-8
≤700
7.5
1.8-5
14.5
1200x12000
3-5
3-8
≤700
11
2-6
14.8
1500x12000
3-5
2-6
≤800
15
3.5-9
17.8
1800x12000
3-5
2-6
≤800
18
5-12
25
2200x12000
3-5
1.5-6
≤800
18.5
6-15
33
2200x18000
3-5
1.5-6
≤800
22
10-18
53.8
2200x20000
3-5
1.5-6
≤800
30
12-20
56
2400x20000
3-5
1.5-5
≤800
37
18-30
60
3000x20000
3-5
1.5-5
≤800
55
25-35
78
3000x25000
3-5
1.5-5
≤800
75
32-40
104.9
Esong is a China rotary drier manufacturer located in China's largest city, Shanghai. Surrounded by convenient transportation possibilities by land, sea, and air, we can reduce the shipping cost for our clients.
At Esong, we can provide full specifications of large and medium-sized mineral machinery, metallurgy equipment and building materials equipment, such as crushing machines, mineral processing equipment, cement production lines, rolling mill equipment, etc. These mining crusher machines are reliable in quality and low in cost. Welcome rotary drier manufacturer and purchasers all over the globe to contact us!
Thursday, September 29, 2011
1.2*12 Rotary Dryer
1 Be used for drying of limestone slag, coal powder, slag, clay stone.
2 ISO 9001:2000
Features of the 1.2*12 Rotary Dryer:
Transfers Barrel Dryer (mm)
Ø1200
Transfers Barrel Length (mm)
12
Gradient
(°)
3~5
Rotational Speed
(r/min
)
5.8
Weight (t)
13.1
Power (kw)
11
Volume (m
³)
13.31
The Rotary Dryer made by our company is mainly used in building materials, metallurgy, chemical plant, cement plant for drying of limestone slag, coal powder, slag, and clay stone. This dryer is formed by rotary body, lifting blade, driving device, supporting device and sealing ring. The dryer has advantages of reasonable structure, high efficiency, low energy consumption and convenient for transportation.
Update Date:2011-3-27 1:44:41
2 ISO 9001:2000
Features of the 1.2*12 Rotary Dryer:
Transfers Barrel Dryer (mm)
Ø1200
Transfers Barrel Length (mm)
12
Gradient
(°)
3~5
Rotational Speed
(r/min
)
5.8
Weight (t)
13.1
Power (kw)
11
Volume (m
³)
13.31
The Rotary Dryer made by our company is mainly used in building materials, metallurgy, chemical plant, cement plant for drying of limestone slag, coal powder, slag, and clay stone. This dryer is formed by rotary body, lifting blade, driving device, supporting device and sealing ring. The dryer has advantages of reasonable structure, high efficiency, low energy consumption and convenient for transportation.
Update Date:2011-3-27 1:44:41
2011 China New fluidized bed dryers with high quality
fluidized bed dryers
1.Supply the whole production line layout
2.Italy technology but Chinese price
3.3 years'after-sales se
fluidized bed dryers
Gongyi Wangda Machinery Factory
, located in the west of Zhengzhou City, which has two parts, old factory is in urban nearby train station and new factory is in Zhitian Industrial Park of Gongyi.
With unique geographical condition, Wangda Machinery concentrates capital, technology, personnel, information and market as advantages, and forms to a strong company entity with more than 30,000 square meters area, 25,000 square meters standard plant and 50 million fixed assets.
Wangda Machinery always firmly follows the tenets of “reputation, best service, leading technology, quality assurance” and adheres to “people-oriented, science and technology”. We’re constantly improving product quality, manufacturing capacity. Produced on the basis of features of home and abroad manufacturers, our aerated concrete equipments operate steadily, and have been widely used in China and exported to Southeast, Asia, Africa, the Middle East and other countries.
For the sake of users’ approbation, support and expectation, Wangda Machinery will provide machines with more advanced and better quality as well as timely and quality service.
Main Use:
Rotary dryer
is mainly for dealing with material in large quantities. As reliable operation, operating flexibility, adaptability and large capacity, this dryer is widely used in metallurgy, building materials, food, light industry, chemical industry, coal, medicine and mining industries.
This generally adapted to granular powder materials. Through the way of mixing material partially, this dryer also can be used for drying sticky paste-like materials or materials with high water content.
Structure:
Rotary dryer
consists of drum shell, front and rear roller ring, gears, block roll, pinion, discharging part, reducer, motor, warm air duct, feed-in chute, furnace body and other components. Besides, we can design gas producer, combustor chamber or supporting elevator, belt conveyor, quantitative feeder, dust collector cyclone, induced draft fan, etc.
Technical Parameter:
Type
Inclination (%)
Rotation Speed(r/min)
Inlet Temperature
(°C)
Power(kw)
Capacity(t/h)
Weight(t)
Φ600×6000
3-5
3-8
≤700
3
0.5-1.5
2.9
Φ800×8000
3-5
3-8
≤700
4
0.8-2.0
3.5
Φ800×10000
3-5
3-8
≤700
4
0.8-2.5
4.5
Φ1000×10000
3-5
3-8
≤700
5.5
1.0-3.5
5.6
Φ1200×10000
3-5
3-8
≤700
7.5
1.8-5
14.5
Φ1200×12000
3-5
3-8
≤700
11
2-6
14.8
Φ1500×14000
3-5
2-6
≤800
15
3.5-9
17.8
Φ1800×14000
3-5
2-6
≤800
18
5-12
22
Φ2200×16000
3-5
1.5-6
≤800
30
12-25
36
Φ2400×18000
3-5
1.5-5
≤800
37
18-30
52
Φ3000×20000
3-5
1.5-5
≤800
55
25-35
80
Φ3000×25000
3-5
1.5-5
≤800
75
32-40
86
Remarks:
(The above capacity is on the basis of 18% moisture content of limestone. Drying capacity is different according to the difference of material features, moisture content and drying temperature.)
Showcase:
1.Supply the whole production line layout
2.Italy technology but Chinese price
3.3 years'after-sales se
fluidized bed dryers
Gongyi Wangda Machinery Factory
, located in the west of Zhengzhou City, which has two parts, old factory is in urban nearby train station and new factory is in Zhitian Industrial Park of Gongyi.
With unique geographical condition, Wangda Machinery concentrates capital, technology, personnel, information and market as advantages, and forms to a strong company entity with more than 30,000 square meters area, 25,000 square meters standard plant and 50 million fixed assets.
Wangda Machinery always firmly follows the tenets of “reputation, best service, leading technology, quality assurance” and adheres to “people-oriented, science and technology”. We’re constantly improving product quality, manufacturing capacity. Produced on the basis of features of home and abroad manufacturers, our aerated concrete equipments operate steadily, and have been widely used in China and exported to Southeast, Asia, Africa, the Middle East and other countries.
For the sake of users’ approbation, support and expectation, Wangda Machinery will provide machines with more advanced and better quality as well as timely and quality service.
Main Use:
Rotary dryer
is mainly for dealing with material in large quantities. As reliable operation, operating flexibility, adaptability and large capacity, this dryer is widely used in metallurgy, building materials, food, light industry, chemical industry, coal, medicine and mining industries.
This generally adapted to granular powder materials. Through the way of mixing material partially, this dryer also can be used for drying sticky paste-like materials or materials with high water content.
Structure:
Rotary dryer
consists of drum shell, front and rear roller ring, gears, block roll, pinion, discharging part, reducer, motor, warm air duct, feed-in chute, furnace body and other components. Besides, we can design gas producer, combustor chamber or supporting elevator, belt conveyor, quantitative feeder, dust collector cyclone, induced draft fan, etc.
Technical Parameter:
Type
Inclination (%)
Rotation Speed(r/min)
Inlet Temperature
(°C)
Power(kw)
Capacity(t/h)
Weight(t)
Φ600×6000
3-5
3-8
≤700
3
0.5-1.5
2.9
Φ800×8000
3-5
3-8
≤700
4
0.8-2.0
3.5
Φ800×10000
3-5
3-8
≤700
4
0.8-2.5
4.5
Φ1000×10000
3-5
3-8
≤700
5.5
1.0-3.5
5.6
Φ1200×10000
3-5
3-8
≤700
7.5
1.8-5
14.5
Φ1200×12000
3-5
3-8
≤700
11
2-6
14.8
Φ1500×14000
3-5
2-6
≤800
15
3.5-9
17.8
Φ1800×14000
3-5
2-6
≤800
18
5-12
22
Φ2200×16000
3-5
1.5-6
≤800
30
12-25
36
Φ2400×18000
3-5
1.5-5
≤800
37
18-30
52
Φ3000×20000
3-5
1.5-5
≤800
55
25-35
80
Φ3000×25000
3-5
1.5-5
≤800
75
32-40
86
Remarks:
(The above capacity is on the basis of 18% moisture content of limestone. Drying capacity is different according to the difference of material features, moisture content and drying temperature.)
Showcase:
Drying Machine for Cassava Dregs
Dryer for Cassava Dregs
1.Approved ISO,9001:2008
2.large capacity,low cost
3.long using time
4.Environmental friendly dryer
Drying Machine for Cassava Dregs
Brief introduction:
Cassava dregs (slag cassava, sweet potato residue, potato waste, and more) by product of starch factory, alcohol plant, and more
It contain a kind of internal moisture and high viscosity so it is easily to stick to the wall, cake and clog
The drying drying machinecan't work and our user's benefit is omitted
Can dry the high moisture content of all kinds of cassava dregs under 12%
This drying machinehave national patent technology, it has special thermoregulation, material rasing, material guiding, whisking and other devices, which are effectively avoiding to stick to the wall and clog, and more
Therefor the material has a good color, high quality
This device is energy-saving, environment protected
New and old customers are well received
Mechanical structure and working principle
cassava dregs dryer consists of the heat source, feeding machine, rotary drum, discharging machine, induced draft fan, discharge devices, and distribution cabinet
The wet material is put into the drying machineafter dehydration
The material can disperse evenly and contact fully with the hot air in the drying machinethrough the stirring of the plate which is in the roller, thus quicken the speed of drying, heat and mass transferring
In the process of drying, the material can be sent out by the star unloading valve which is in the other end of the drying machineunder the action of the gradient plate and the hot mass
The technological and all drying machines' parameter, structure of the production line are being careful analysis and verified by the experiment of drying the bean dregs
We fully take into account the large moisture content, high protein levels, big viscous and adopted a series of unique original technology to solve these problem to ensure a perfect drying results
Main features
High degree of mechanization, large production capacity, and continuous option
Simple and excellent structure,material running smoothly through the cylinder, operating convenience
Less mechanical failure, low maintain charge, and low power consumption
Uniformity of drying product is good
Drying production line using a special scattered installations to ensure the drying machine's drying effect
Use for innovative and unique sealing device, and sophisticated keep-warm system
Reduce the coal consumption of the system effectively
Whole system holds a good performance of sealing
With complete dust removal drying machine
No dust spilling
Has a good operating environment
Whole drying system uses electric centralized control, auto-control of temperature for hot air, high automation and convenient operation
Can join in crushing, mixing, granulating, packing, and other follow-up steps after drying to produce the finished product of bean dregs particle feed
1.Approved ISO,9001:2008
2.large capacity,low cost
3.long using time
4.Environmental friendly dryer
Drying Machine for Cassava Dregs
Brief introduction:
Cassava dregs (slag cassava, sweet potato residue, potato waste, and more) by product of starch factory, alcohol plant, and more
It contain a kind of internal moisture and high viscosity so it is easily to stick to the wall, cake and clog
The drying drying machinecan't work and our user's benefit is omitted
Can dry the high moisture content of all kinds of cassava dregs under 12%
This drying machinehave national patent technology, it has special thermoregulation, material rasing, material guiding, whisking and other devices, which are effectively avoiding to stick to the wall and clog, and more
Therefor the material has a good color, high quality
This device is energy-saving, environment protected
New and old customers are well received
Mechanical structure and working principle
cassava dregs dryer consists of the heat source, feeding machine, rotary drum, discharging machine, induced draft fan, discharge devices, and distribution cabinet
The wet material is put into the drying machineafter dehydration
The material can disperse evenly and contact fully with the hot air in the drying machinethrough the stirring of the plate which is in the roller, thus quicken the speed of drying, heat and mass transferring
In the process of drying, the material can be sent out by the star unloading valve which is in the other end of the drying machineunder the action of the gradient plate and the hot mass
The technological and all drying machines' parameter, structure of the production line are being careful analysis and verified by the experiment of drying the bean dregs
We fully take into account the large moisture content, high protein levels, big viscous and adopted a series of unique original technology to solve these problem to ensure a perfect drying results
Main features
High degree of mechanization, large production capacity, and continuous option
Simple and excellent structure,material running smoothly through the cylinder, operating convenience
Less mechanical failure, low maintain charge, and low power consumption
Uniformity of drying product is good
Drying production line using a special scattered installations to ensure the drying machine's drying effect
Use for innovative and unique sealing device, and sophisticated keep-warm system
Reduce the coal consumption of the system effectively
Whole system holds a good performance of sealing
With complete dust removal drying machine
No dust spilling
Has a good operating environment
Whole drying system uses electric centralized control, auto-control of temperature for hot air, high automation and convenient operation
Can join in crushing, mixing, granulating, packing, and other follow-up steps after drying to produce the finished product of bean dregs particle feed
Drying Machine for Hank Yarns
We have a lot of agricultural and industrial machinery,Welcome consulting.
·The equipment is for the dryness of natureal silk,woolen acrylic fiber,cotton and so on after drying or bleaching.The tunnel specifications vary from 4 to 12 knots.
·The equipment is for the dryness of natureal silk,woolen acrylic fiber,cotton and so on after drying or bleaching.The tunnel specifications vary from 4 to 12 knots.
Drying Machine for Ore Powder
Rotary dryer:
1. Reliable quality, competitive price
2. Stable performance, great design
3. Professional production
Rotary dryer:
The Rotary dryer made by our company is mainly used in building materials, metallurgy,chemical plant, cement plant for drying of limestone slag, coal powder, slag, clay stone. This dryer is formed
by rotary body, lifting blade, driving device,supporting device and sealing ring. The dryer has advantages of reasonable structure,high efficiency, low energy consumption and convenient for
transportation.
Technical data:
Type(mm)
Gradient(%)
Rotational speed(r/min)
Inlet air temperature(°C)
Power(kw)
Productivity(t/h)
Weight(t)
Φ1800*18000
3-5
2-6
≤800
18.5
3.5-9
17.8
We are waiting for your more enquires about our products.
1. Reliable quality, competitive price
2. Stable performance, great design
3. Professional production
Rotary dryer:
The Rotary dryer made by our company is mainly used in building materials, metallurgy,chemical plant, cement plant for drying of limestone slag, coal powder, slag, clay stone. This dryer is formed
by rotary body, lifting blade, driving device,supporting device and sealing ring. The dryer has advantages of reasonable structure,high efficiency, low energy consumption and convenient for
transportation.
Technical data:
Type(mm)
Gradient(%)
Rotational speed(r/min)
Inlet air temperature(°C)
Power(kw)
Productivity(t/h)
Weight(t)
Φ1800*18000
3-5
2-6
≤800
18.5
3.5-9
17.8
We are waiting for your more enquires about our products.
Drying Machine for Screen Printing Plate
1.Factory Price
2.Using Width(mm):1200*1500
Horizontal-type Drying Machine for Screen Printing Plate
Application of Drying Machine for Screen Printing Plate:
It can prevent the precision screen printing plate from avoiding light and dry.
Main Features:
(1)Horizontal design;
(2It can make sure emulsion dry equably on the screen printing plate
with Stainless Steel heating tube;
(3)Design perfect hot air circulation system;
(4It has superior temperature controlled electric component, adjustable digital readout
and PID function.
(5Installing universal wheel on the equipment base and move conveniently.
Installing inspect light box on the top of the machine.
Technical Parameters:
Technical Parameters
Model
YBL8810K
YBL1012K
YBL1215K
Using Width(mm)
800*1000
1000*1200
1200*1500
Power
3.0
3.8
4.8
Voltage
220/380
220/380
220/380
OEM: our factory can custom according to your
requirement with our excellent engineers
who have more than 10 years experience.
2.Using Width(mm):1200*1500
Horizontal-type Drying Machine for Screen Printing Plate
Application of Drying Machine for Screen Printing Plate:
It can prevent the precision screen printing plate from avoiding light and dry.
Main Features:
(1)Horizontal design;
(2It can make sure emulsion dry equably on the screen printing plate
with Stainless Steel heating tube;
(3)Design perfect hot air circulation system;
(4It has superior temperature controlled electric component, adjustable digital readout
and PID function.
(5Installing universal wheel on the equipment base and move conveniently.
Installing inspect light box on the top of the machine.
Technical Parameters:
Technical Parameters
Model
YBL8810K
YBL1012K
YBL1215K
Using Width(mm)
800*1000
1000*1200
1200*1500
Power
3.0
3.8
4.8
Voltage
220/380
220/380
220/380
OEM: our factory can custom according to your
requirement with our excellent engineers
who have more than 10 years experience.
Drying Machine of WD
Drying Machine:
1.Mutiple function
2.Stable performance
3.Easy to operate and maintain
4.Lower production capacity
Drying Machine:
Gongyi Wangda Machinery Factory
, located in the west of Zhengzhou City, which has two parts, old factory is in urban nearby train station and new factory is in Zhitian Industrial Park of Gongyi.
With unique geographical condition, Wangda Machinery concentrates capital, technology, personnel, information and market as advantages, and forms to a strong company entity with more than 30,000 square meters area, 25,000 square meters standard plant and 50 million fixed assets.
Wangda Machinery always firmly follows the tenets of “reputation, best service, leading technology, quality assurance” and adheres to “people-oriented, science and technology”. We’re constantly improving product quality, manufacturing capacity. Produced on the basis of features of home and abroad manufacturers, our aerated concrete equipments operate steadily, and have been widely used in China and exported to Southeast, Asia, Africa, the Middle East and other countries.
For the sake of users’ approbation, support and expectation, Wangda Machinery will provide machines with more advanced and better quality as well as timely and quality service.
Main Use:
Rotary dryer
is mainly for dealing with material in large quantities. As reliable operation, operating flexibility, adaptability and large capacity, this dryer is widely used in metallurgy, building materials, food, light industry, chemical industry, coal, medicine and mining industries.
This generally adapted to granular powder materials. Through the way of mixing material partially, this dryer also can be used for drying sticky paste-like materials or materials with high water content.
Structure:
Rotary dryer
consists of drum shell, front and rear roller ring, gears, block roll, pinion, discharging part, reducer, motor, warm air duct, feed-in chute, furnace body and other components. Besides, we can design gas producer, combustor chamber or supporting elevator, belt conveyor, quantitative feeder, dust collector cyclone, induced draft fan, etc.
Machine Picture:
1.Mutiple function
2.Stable performance
3.Easy to operate and maintain
4.Lower production capacity
Drying Machine:
Gongyi Wangda Machinery Factory
, located in the west of Zhengzhou City, which has two parts, old factory is in urban nearby train station and new factory is in Zhitian Industrial Park of Gongyi.
With unique geographical condition, Wangda Machinery concentrates capital, technology, personnel, information and market as advantages, and forms to a strong company entity with more than 30,000 square meters area, 25,000 square meters standard plant and 50 million fixed assets.
Wangda Machinery always firmly follows the tenets of “reputation, best service, leading technology, quality assurance” and adheres to “people-oriented, science and technology”. We’re constantly improving product quality, manufacturing capacity. Produced on the basis of features of home and abroad manufacturers, our aerated concrete equipments operate steadily, and have been widely used in China and exported to Southeast, Asia, Africa, the Middle East and other countries.
For the sake of users’ approbation, support and expectation, Wangda Machinery will provide machines with more advanced and better quality as well as timely and quality service.
Main Use:
Rotary dryer
is mainly for dealing with material in large quantities. As reliable operation, operating flexibility, adaptability and large capacity, this dryer is widely used in metallurgy, building materials, food, light industry, chemical industry, coal, medicine and mining industries.
This generally adapted to granular powder materials. Through the way of mixing material partially, this dryer also can be used for drying sticky paste-like materials or materials with high water content.
Structure:
Rotary dryer
consists of drum shell, front and rear roller ring, gears, block roll, pinion, discharging part, reducer, motor, warm air duct, feed-in chute, furnace body and other components. Besides, we can design gas producer, combustor chamber or supporting elevator, belt conveyor, quantitative feeder, dust collector cyclone, induced draft fan, etc.
Machine Picture:
Drying Machine(hotel, hospital, restaurant)
Drying machine(hotel, hospital, restaurant)
1.Staless steel, high speed
2.ISO9001:2000
3.easy operation.
Product name:Drying machine(hotel, hospital, restaurant)
1. This series of the dryer's drum and major components are made from high-quality stainless steel to prevent the pollution of corrosion to the fabric.
2. The fan of this series dryer is developed by ourselves,low noise,no dirt,can aviod the short coming of low efficiency caused by dirt on fan.
3. The heat-exchangers of this series of dryer use the tube looking like wings,has high thermal efficiency and long service life.
Model
HG(Q)-15
HG(Q)-25
HG(Q)-35
HG(Q)-50
HG(Q)-70
HG(Q)-100
Capacity(kg)
15
25
35
50
70
100
Rolling Container Dimension(mm)
Φ760x650
Φ960x650
Φ960x1000
Φ1200x870
Φ1280x890
Φ1500x1100
Motor Power(kw)
0.55
0.75
0.75
1.1
1.1
2.2
Fan power(kw)
0.55
0.75
0.75
1.1
1.1
2.2
Heating power(kw)
14
20
32
35.2
44
50
Rated Voltage(V)
380
380
380
380
380
380
Steam Pressure(Mpa)
0.4-0.6
0.4-0.6
0.4-0.6
0.4-0.6
0.4-0.6
0.4-0.6
Consumes of Steam(kg)
40-50
50-60
60-70
70-80
80-100
120-150
Dimension(L.W.H) (mm)
840x1200x1620
1060x1200x1960
1060x1550x1960
1310x1500x2200
1420x1600x2300
1650x1850x2430
Installation dimensions(L.W.H) (mm
800x760
1020x770
1020x1100
1265x1000
1365x1050
1580x1250
Total Weight(kg)
320
400
450
550
600
1000
1.Staless steel, high speed
2.ISO9001:2000
3.easy operation.
Product name:Drying machine(hotel, hospital, restaurant)
1. This series of the dryer's drum and major components are made from high-quality stainless steel to prevent the pollution of corrosion to the fabric.
2. The fan of this series dryer is developed by ourselves,low noise,no dirt,can aviod the short coming of low efficiency caused by dirt on fan.
3. The heat-exchangers of this series of dryer use the tube looking like wings,has high thermal efficiency and long service life.
Model
HG(Q)-15
HG(Q)-25
HG(Q)-35
HG(Q)-50
HG(Q)-70
HG(Q)-100
Capacity(kg)
15
25
35
50
70
100
Rolling Container Dimension(mm)
Φ760x650
Φ960x650
Φ960x1000
Φ1200x870
Φ1280x890
Φ1500x1100
Motor Power(kw)
0.55
0.75
0.75
1.1
1.1
2.2
Fan power(kw)
0.55
0.75
0.75
1.1
1.1
2.2
Heating power(kw)
14
20
32
35.2
44
50
Rated Voltage(V)
380
380
380
380
380
380
Steam Pressure(Mpa)
0.4-0.6
0.4-0.6
0.4-0.6
0.4-0.6
0.4-0.6
0.4-0.6
Consumes of Steam(kg)
40-50
50-60
60-70
70-80
80-100
120-150
Dimension(L.W.H) (mm)
840x1200x1620
1060x1200x1960
1060x1550x1960
1310x1500x2200
1420x1600x2300
1650x1850x2430
Installation dimensions(L.W.H) (mm
800x760
1020x770
1020x1100
1265x1000
1365x1050
1580x1250
Total Weight(kg)
320
400
450
550
600
1000
Drying Machine
Drying Machine Advantages:
Reasonable structure;
High efficiency;
Low energy consumption;
Convenient transportation.
Drying Machine Application & Composition:
The indirect heat transfer dryer made by our company can be used in building materials, metallurgy, chemical industry, cement plant for drying of limestone slag, coal powder, slag, clay stone. This dryer is formed of rotary body, lifting blade, driving device, supporting device and sealing ring.
Drying Machine Advantages:
The dryer has advantages of reasonable structure, high efficiency, low energy consumption and convenient transportation.
Performance Characteristics of Drying Machine:
This series drier is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical. Rotating dryer can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used.
Techinical Parameter of Drying Machine
Specifications(m)
Capacity(t/h)
Main motor
Main gear box
Weight(t)
Power(kw)
Model
Model
Speed reduction ratio
Ø1.2*10
2.5
7.5
Y160M-R
3
ZL50-16-I
-----
13.5
Ø1.5*12
3.3-4.9
10
Y160L-6-B
3
JZQ500-III-2F
-----
18.9
Ø1.5*15
4-6
18.5
Y200L
1
-6
JZQ500-III-2F
-----
21
Ø1.8*12
4-6
18.5
Y160L-6
ZQ50-16II-2
16.46
22.83
Ø2.2*12
7-12
18.5
Y200L
7
-6
JZQ650-III
31.5
37.6
Ø2.2*14
7-12
22
Y200L
7
-6
JZQ650-III
31.5
40
Ø2.2*16
12
30
Y225M-6
JZQ750-III
31.5
45
Ø2.4*14
12
30
Y250M-6
JZQ750-III
31.5
51
Ø2.4*18
10-13
37
Y250M-6
ZL85-13-I
27.16
54
Ø2.4*20
10-14
37
Y250N-6
ZL85-13-I
27.16
54.14
Ø3*20
25
55
Y250M-4
ZL100-16-I
41.52
78
Ø3*25
32-36
75
YR280M-4
ZL100-16-I
41.52
104.9
Technical parameters are subject to change without notice.
Reasonable structure;
High efficiency;
Low energy consumption;
Convenient transportation.
Drying Machine Application & Composition:
The indirect heat transfer dryer made by our company can be used in building materials, metallurgy, chemical industry, cement plant for drying of limestone slag, coal powder, slag, clay stone. This dryer is formed of rotary body, lifting blade, driving device, supporting device and sealing ring.
Drying Machine Advantages:
The dryer has advantages of reasonable structure, high efficiency, low energy consumption and convenient transportation.
Performance Characteristics of Drying Machine:
This series drier is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical. Rotating dryer can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used.
Techinical Parameter of Drying Machine
Specifications(m)
Capacity(t/h)
Main motor
Main gear box
Weight(t)
Power(kw)
Model
Model
Speed reduction ratio
Ø1.2*10
2.5
7.5
Y160M-R
3
ZL50-16-I
-----
13.5
Ø1.5*12
3.3-4.9
10
Y160L-6-B
3
JZQ500-III-2F
-----
18.9
Ø1.5*15
4-6
18.5
Y200L
1
-6
JZQ500-III-2F
-----
21
Ø1.8*12
4-6
18.5
Y160L-6
ZQ50-16II-2
16.46
22.83
Ø2.2*12
7-12
18.5
Y200L
7
-6
JZQ650-III
31.5
37.6
Ø2.2*14
7-12
22
Y200L
7
-6
JZQ650-III
31.5
40
Ø2.2*16
12
30
Y225M-6
JZQ750-III
31.5
45
Ø2.4*14
12
30
Y250M-6
JZQ750-III
31.5
51
Ø2.4*18
10-13
37
Y250M-6
ZL85-13-I
27.16
54
Ø2.4*20
10-14
37
Y250N-6
ZL85-13-I
27.16
54.14
Ø3*20
25
55
Y250M-4
ZL100-16-I
41.52
78
Ø3*25
32-36
75
YR280M-4
ZL100-16-I
41.52
104.9
Technical parameters are subject to change without notice.
Drying Machine
Postcook Drying Machine Integrates Stabilizing,Cooking and Dryinging,It Is Used For Shrimp Feed.It Got CE Certificate And ISO
We are manufacturing circumference drying machine,fluid drying machine,floating drying machine ,postcook drying machine ,drying machine,drying equipment for exportation.
SWGZ Series Postcook Dryer
Features
1.It integrates stabilizing, cooking and drying;
2.Four walls in the stabilizing and cooking section, mesh belt at the bottom and mesh pipe are fitted with steam heating system;
3.Direct steam can be injected to the stabilizing and cooking section so as to make materials gelatinize fully;
4.FC driving is adopted in the drying section. The cooking temperature, drying air flow rate and cooking time can be adjusted according to state and output of products;
5.It can ensure complete pellet surface, even cooking and consistent moisture content in finished products, so it is an indispensable equipment for producing high grade shrimp feed.
We are manufacturing circumference drying machine,fluid drying machine,floating drying machine ,postcook drying machine ,drying machine,drying equipment for exportation.
SWGZ Series Postcook Dryer
Features
1.It integrates stabilizing, cooking and drying;
2.Four walls in the stabilizing and cooking section, mesh belt at the bottom and mesh pipe are fitted with steam heating system;
3.Direct steam can be injected to the stabilizing and cooking section so as to make materials gelatinize fully;
4.FC driving is adopted in the drying section. The cooking temperature, drying air flow rate and cooking time can be adjusted according to state and output of products;
5.It can ensure complete pellet surface, even cooking and consistent moisture content in finished products, so it is an indispensable equipment for producing high grade shrimp feed.
Drying Machine
Drying Machine Advantages:
1)reasonable structure
2)high efficiency
3)low energy consumption
4)convenient transportation
Drying Machine
Application & Composition:
The indirect heat transfer dryer made by our company can be used in building materials, metallurgy, chemical industry, cement plant for drying of limestone slag, coal powder, slag, clay stone. This dryer is formed of rotary body, lifting blade, driving device, supporting device and sealing ring.
Drying Machine Advantages:
The dryer has advantages of reasonable structure, high efficiency, low energy consumption and convenient transportation.
Performance Characteristics of Drying Machine:
This series drier is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical. Rotating dryer can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used.
Techinical Parameter of Drying Machine:
Specifications(m)
Capacity(t/h)
Main motor
Main gear box
Weight(t)
Power(kw)
Model
Model
Speed reduction ratio
Ø1.2*10
2.5
7.5
Y160M-R
3
ZL50-16-I
-----
13.5
Ø1.5*12
3.3-4.9
10
Y160L-6-B
3
JZQ500-III-2F
-----
18.9
Ø1.5*15
4-6
18.5
Y200L
1
-6
JZQ500-III-2F
-----
21
Ø1.8*12
4-6
18.5
Y160L-6
ZQ50-16II-2
16.46
22.83
Ø2.2*12
7-12
18.5
Y200L
7
-6
JZQ650-III
31.5
37.6
Ø2.2*14
7-12
22
Y200L
7
-6
JZQ650-III
31.5
40
Ø2.2*16
12
30
Y225M-6
JZQ750-III
31.5
45
Ø2.4*14
12
30
Y250M-6
JZQ750-III
31.5
51
Ø2.4*18
10-13
37
Y250M-6
ZL85-13-I
27.16
54
Ø2.4*20
10-14
37
Y250N-6
ZL85-13-I
27.16
54.14
Ø3*20
25
55
Y250M-4
ZL100-16-I
41.52
78
Ø3*25
32-36
75
YR280M-4
ZL100-16-I
41.52
104.9
Technical parameters are subject to change without notice.
1)reasonable structure
2)high efficiency
3)low energy consumption
4)convenient transportation
Drying Machine
Application & Composition:
The indirect heat transfer dryer made by our company can be used in building materials, metallurgy, chemical industry, cement plant for drying of limestone slag, coal powder, slag, clay stone. This dryer is formed of rotary body, lifting blade, driving device, supporting device and sealing ring.
Drying Machine Advantages:
The dryer has advantages of reasonable structure, high efficiency, low energy consumption and convenient transportation.
Performance Characteristics of Drying Machine:
This series drier is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical. Rotating dryer can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used.
Techinical Parameter of Drying Machine:
Specifications(m)
Capacity(t/h)
Main motor
Main gear box
Weight(t)
Power(kw)
Model
Model
Speed reduction ratio
Ø1.2*10
2.5
7.5
Y160M-R
3
ZL50-16-I
-----
13.5
Ø1.5*12
3.3-4.9
10
Y160L-6-B
3
JZQ500-III-2F
-----
18.9
Ø1.5*15
4-6
18.5
Y200L
1
-6
JZQ500-III-2F
-----
21
Ø1.8*12
4-6
18.5
Y160L-6
ZQ50-16II-2
16.46
22.83
Ø2.2*12
7-12
18.5
Y200L
7
-6
JZQ650-III
31.5
37.6
Ø2.2*14
7-12
22
Y200L
7
-6
JZQ650-III
31.5
40
Ø2.2*16
12
30
Y225M-6
JZQ750-III
31.5
45
Ø2.4*14
12
30
Y250M-6
JZQ750-III
31.5
51
Ø2.4*18
10-13
37
Y250M-6
ZL85-13-I
27.16
54
Ø2.4*20
10-14
37
Y250N-6
ZL85-13-I
27.16
54.14
Ø3*20
25
55
Y250M-4
ZL100-16-I
41.52
78
Ø3*25
32-36
75
YR280M-4
ZL100-16-I
41.52
104.9
Technical parameters are subject to change without notice.
Drying Machinery
Because of the difference product and special requests of customers, we supply different equipment for your reference and drying
ales manager and engineer Mr Kenny
Because of the difference product and special requests of customers, we supply different equipment for your reference and drying machine, spray dryer. For any more information, you can contact our
ales manager and engineer Mr Kenny
Because of the difference product and special requests of customers, we supply different equipment for your reference and drying machine, spray dryer. For any more information, you can contact our
Wednesday, September 28, 2011
2011 China New industrial drying with high effciency
industrial drying
1.Compact structure
2.Reliable performance
3.Good service
4.Low power and good design
industrial drying
Gongyi Wangda Machinery Factory
, located in the west of Zhengzhou City, which has two parts, old factory is in urban nearby train station and new factory is in Zhitian Industrial Park of Gongyi.
With unique geographical condition, Wangda Machinery concentrates capital, technology, personnel, information and market as advantages, and forms to a strong company entity with more than 30,000 square meters area, 25,000 square meters standard plant and 50 million fixed assets.
Wangda Machinery always firmly follows the tenets of “reputation, best service, leading technology, quality assurance” and adheres to “people-oriented, science and technology”. We’re constantly improving product quality, manufacturing capacity. Produced on the basis of features of home and abroad manufacturers, our aerated concrete equipments operate steadily, and have been widely used in China and exported to Southeast, Asia, Africa, the Middle East and other countries.
For the sake of users’ approbation, support and expectation, Wangda Machinery will provide machines with more advanced and better quality as well as timely and quality service.
Main Use:
Ceramic sand dryer is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical. This dryer can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used around the world.
This equipment is mainly used in oil field and the finished product-ceramic sand is adopted as oil pressure support agent.
Technical Parameter:
Specification(m)
Capacity(t/h)
Main Motor
Main Reducer
Weight(t)
Power(kw)
Model
Model
Speed Ratio
Φ1.2×12m
2.5
7.5
Y160M-R3
ZL50-16-I
14.8
Φ1.5×12m
3.3-4.9
10
Y160L-6-B3
JZQ500-III-2F
17.8
Φ1.5×14m
4-6
11
Y200L1-6
JZQ500-III-2F
18.9
Φ1.8×14m
4-6
11
Y160L-6
ZQ50-16II-2
16.46
22
Φ2.2×16m
12
30
Y225M-6
JZQ750-III
31.5
36
Φ2.4×18m
10-13
37
Y250M-6
ZL85-13-I
27.16
52
Ceramic Sand Production Line:
This production line is mainly used in oil field and the finished product-ceramic sand is adopted as oil pressure support agent.
Showcase:
1.Compact structure
2.Reliable performance
3.Good service
4.Low power and good design
industrial drying
Gongyi Wangda Machinery Factory
, located in the west of Zhengzhou City, which has two parts, old factory is in urban nearby train station and new factory is in Zhitian Industrial Park of Gongyi.
With unique geographical condition, Wangda Machinery concentrates capital, technology, personnel, information and market as advantages, and forms to a strong company entity with more than 30,000 square meters area, 25,000 square meters standard plant and 50 million fixed assets.
Wangda Machinery always firmly follows the tenets of “reputation, best service, leading technology, quality assurance” and adheres to “people-oriented, science and technology”. We’re constantly improving product quality, manufacturing capacity. Produced on the basis of features of home and abroad manufacturers, our aerated concrete equipments operate steadily, and have been widely used in China and exported to Southeast, Asia, Africa, the Middle East and other countries.
For the sake of users’ approbation, support and expectation, Wangda Machinery will provide machines with more advanced and better quality as well as timely and quality service.
Main Use:
Ceramic sand dryer is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical. This dryer can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used around the world.
This equipment is mainly used in oil field and the finished product-ceramic sand is adopted as oil pressure support agent.
Technical Parameter:
Specification(m)
Capacity(t/h)
Main Motor
Main Reducer
Weight(t)
Power(kw)
Model
Model
Speed Ratio
Φ1.2×12m
2.5
7.5
Y160M-R3
ZL50-16-I
14.8
Φ1.5×12m
3.3-4.9
10
Y160L-6-B3
JZQ500-III-2F
17.8
Φ1.5×14m
4-6
11
Y200L1-6
JZQ500-III-2F
18.9
Φ1.8×14m
4-6
11
Y160L-6
ZQ50-16II-2
16.46
22
Φ2.2×16m
12
30
Y225M-6
JZQ750-III
31.5
36
Φ2.4×18m
10-13
37
Y250M-6
ZL85-13-I
27.16
52
Ceramic Sand Production Line:
This production line is mainly used in oil field and the finished product-ceramic sand is adopted as oil pressure support agent.
Showcase:
Drying Oven(LCD)
1. Polished stainless-steel chamber
2. Large LCD screen
3. Latest PID controller
Drying Oven(LCD)
Features
1. Polished stainless-steel chamber
2. Large LCD screen
3. Latest PID controller
4. Independent temperature-limiting alarm system ensures experiments run safely. (option)
5. RS485 connector is option which can connect computer to record the parameters and the variations of temperature. (option)
Specifications
Model
Electrical Requirement
Power
Consumption
Temperature Range
Temperature Stability
Temperature Uniformity
Shelves
Internior
Dimension
(W×D×H, mm)
Chamber
Volume
Timing Range
BPG-9040A
220V 50Hz
800W
RT+10~200/ RT+10~250
±1
1.5%
2(pcs)
340×320×340
40L
1~9999min
BPG-9070A
1550W
400×400×500
80L
BPG-9140A
2050W
500×370×800
150L
BPG-9240A
2450W
520×460×1050
250L
2. Large LCD screen
3. Latest PID controller
Drying Oven(LCD)
Features
1. Polished stainless-steel chamber
2. Large LCD screen
3. Latest PID controller
4. Independent temperature-limiting alarm system ensures experiments run safely. (option)
5. RS485 connector is option which can connect computer to record the parameters and the variations of temperature. (option)
Specifications
Model
Electrical Requirement
Power
Consumption
Temperature Range
Temperature Stability
Temperature Uniformity
Shelves
Internior
Dimension
(W×D×H, mm)
Chamber
Volume
Timing Range
BPG-9040A
220V 50Hz
800W
RT+10~200/ RT+10~250
±1
1.5%
2(pcs)
340×320×340
40L
1~9999min
BPG-9070A
1550W
400×400×500
80L
BPG-9140A
2050W
500×370×800
150L
BPG-9240A
2450W
520×460×1050
250L
Drying Oven/Incubator(dual usages), lab equipment
Drying Oven/Incubator(dual usages), lab equipment, provide direct and reliable supports for colleges, research institutions....
Drying Oven/Incubator(dual usages), lab equipment, adopts our long time experience and features high quality, reliability and safety. Forced ventilation by flower. Drying/incubating dual usages provide direct and reliable supports for colleges, research institutions and manufacturing departments.
Features:
1.Polished stainless steel chamber with observation door. Safe, convenient, modern and good looking.
2.Microprocessor temperature controller. Setting/measuring double display. PID self adjustment for precise and reliable temperature control.
3.Forced warm air ventilation ensure the uniformity of the working temperature.
4.New type silicon sealing material can work long time in a high temperature environment.
5.Air flow adjustable from the temperature control panel.
6.
It has new touch screen operation.
Technique parameters:
Model
Chamber size(mm)
Nominal power (W)
Temperature range (
o
C)
Power source
OIB-010A
340×325×320
500
RT+5
o
C-80
o
C/
RT80
o
C-200
o
C
220V/50Hz
OIB-010B
420×400×450
500
OIB-010C
450×400×450
900
OIB-010D
500×450×520
1500
OIB-010E
600×550×600
2000
Drying Oven/Incubator(dual usages), lab equipment, adopts our long time experience and features high quality, reliability and safety. Forced ventilation by flower. Drying/incubating dual usages provide direct and reliable supports for colleges, research institutions and manufacturing departments.
Features:
1.Polished stainless steel chamber with observation door. Safe, convenient, modern and good looking.
2.Microprocessor temperature controller. Setting/measuring double display. PID self adjustment for precise and reliable temperature control.
3.Forced warm air ventilation ensure the uniformity of the working temperature.
4.New type silicon sealing material can work long time in a high temperature environment.
5.Air flow adjustable from the temperature control panel.
6.
It has new touch screen operation.
Technique parameters:
Model
Chamber size(mm)
Nominal power (W)
Temperature range (
o
C)
Power source
OIB-010A
340×325×320
500
RT+5
o
C-80
o
C/
RT80
o
C-200
o
C
220V/50Hz
OIB-010B
420×400×450
500
OIB-010C
450×400×450
900
OIB-010D
500×450×520
1500
OIB-010E
600×550×600
2000
Drying Oven
Energy-saving And Environmental
VoltagePower
220V3.2kw
Name: Drying Oven
Model: 2A
Feature:
Model
Production
Capacity
Pan Size
Diameter
Weight
Voltage
Power
2A
3 Disk/Times
450×550
450×550×550
100kg
220V
3.2kw
VoltagePower
220V3.2kw
Name: Drying Oven
Model: 2A
Feature:
Model
Production
Capacity
Pan Size
Diameter
Weight
Voltage
Power
2A
3 Disk/Times
450×550
450×550×550
100kg
220V
3.2kw
Drying Oven
Energy-saving And Environmental
VoltagePower
220V4kw
Name: Drying Oven
Model: 3A
Feature:
Model
Production
Capacity
Pan Size
Diameter
Weight
Voltage
Power
3A
5 Disk/Times
500×600
500×600×750
200kg
220V
4kw
VoltagePower
220V4kw
Name: Drying Oven
Model: 3A
Feature:
Model
Production
Capacity
Pan Size
Diameter
Weight
Voltage
Power
3A
5 Disk/Times
500×600
500×600×750
200kg
220V
4kw
Drying Oven
1.Polished stainless-steel chamber
2.Latest PID controller
3.Uniform distribution of air temperature
Drying Oven
Summary
Provided for desiccation, torrefaction, wax-melting and sterilization in mining enterprises, laboratories and scientific research institutes
Features
1. Polished stainless-steel chamber
2. Latest PID controller
3. Uniform distribution of air temperature
4. Forced-air convection
5. Double Layer glass door, larger viewing window.
6. Independent temperature-limiting alarm system ensures experiments run safely. (option)
7. RS485 connector is option which can connect computer to record the parameters and the variations of temperature. (option)
*Remark: Polished stainless-steel chamber is marked with an A
Galvanized sheet chamber isnt marked with an A
Option:
1. Intelligent programmable temperature controllerLCD 2. Printer
3. Independent temperature-limiting Alarm
4. RS485 connector
Specifications
Model
DHG-9030(A) (101-0)
DHG-9050A
DHG-9070(A) (101-1)
DHG-9140(A) (101-2)
DHG-9240(A)
(101-3)
DHG-9420(A) (101-4)
DHG-9620(A)
DHG-9920(A)
Electrical Requirements
220V 50HZ
380V 50Hz
Temperature Range
RT+10~200/RT+10~250
Display Resolution
0.1
Temperature Stability
±1
Ambient temperature
+5~40
Power Consumption
550W
850W
110W
1550W
2050W
3500W
4000W
6000W
Chamber Volume
30L
50L
80L
136L
220L
420L
620L
1000L
Interior Dimension
(mm)W×D×H
340×320×320
420x395x350
450×400×450
550×450×550
600×500×750
640×585×1355
840×600×1355
1000×600×1600
Overall Dimension
(mm)W×D×H
620×530×490
700x610x520
740×618×630
840×670×730
880×720×930
780×750×1880
980×800×1880
1140×800×2150
Shelves
2(pcs)
2(pcs)
2(pcs)
3(pcs)
4(pcs)
5(pcs)
Timing Range
1~9999min
Model
DHG-9035A
DHG-9055A
DHG-9075A
DHG-9145A
DHG-9245A
DHG-9425A
DHG-9625A
Electrical Requirements
220V 50HZ
380V 50Hz
Temperature Range
RT+10~300
Temperature Accuracy
0.1
Display Resolution
±1
Ambient temperature
+5~40
Power Consumption
550W
850W
110W
1550W
2050W
3500W
4000W
Chamber Volume
30L
50L
80L
136L
220L
420L
620L
Interior Dimension
(mm)W×D×H
340×320×320
420x395x350
450×400×450
550×450×550
600×500×750
640×585×1355
840×600×1355
Overall Dimension
(mm)W×D×H
620×530×490
700x610x520
740×618×630
840×670×730
880×720×930
780×750×1880
980×800×1880
Shelves
2(pcs)
2(pcs)
2(pcs)
3(pcs)
4(pcs)
Timing Range
1~9999min
2.Latest PID controller
3.Uniform distribution of air temperature
Drying Oven
Summary
Provided for desiccation, torrefaction, wax-melting and sterilization in mining enterprises, laboratories and scientific research institutes
Features
1. Polished stainless-steel chamber
2. Latest PID controller
3. Uniform distribution of air temperature
4. Forced-air convection
5. Double Layer glass door, larger viewing window.
6. Independent temperature-limiting alarm system ensures experiments run safely. (option)
7. RS485 connector is option which can connect computer to record the parameters and the variations of temperature. (option)
*Remark: Polished stainless-steel chamber is marked with an A
Galvanized sheet chamber isnt marked with an A
Option:
1. Intelligent programmable temperature controllerLCD 2. Printer
3. Independent temperature-limiting Alarm
4. RS485 connector
Specifications
Model
DHG-9030(A) (101-0)
DHG-9050A
DHG-9070(A) (101-1)
DHG-9140(A) (101-2)
DHG-9240(A)
(101-3)
DHG-9420(A) (101-4)
DHG-9620(A)
DHG-9920(A)
Electrical Requirements
220V 50HZ
380V 50Hz
Temperature Range
RT+10~200/RT+10~250
Display Resolution
0.1
Temperature Stability
±1
Ambient temperature
+5~40
Power Consumption
550W
850W
110W
1550W
2050W
3500W
4000W
6000W
Chamber Volume
30L
50L
80L
136L
220L
420L
620L
1000L
Interior Dimension
(mm)W×D×H
340×320×320
420x395x350
450×400×450
550×450×550
600×500×750
640×585×1355
840×600×1355
1000×600×1600
Overall Dimension
(mm)W×D×H
620×530×490
700x610x520
740×618×630
840×670×730
880×720×930
780×750×1880
980×800×1880
1140×800×2150
Shelves
2(pcs)
2(pcs)
2(pcs)
3(pcs)
4(pcs)
5(pcs)
Timing Range
1~9999min
Model
DHG-9035A
DHG-9055A
DHG-9075A
DHG-9145A
DHG-9245A
DHG-9425A
DHG-9625A
Electrical Requirements
220V 50HZ
380V 50Hz
Temperature Range
RT+10~300
Temperature Accuracy
0.1
Display Resolution
±1
Ambient temperature
+5~40
Power Consumption
550W
850W
110W
1550W
2050W
3500W
4000W
Chamber Volume
30L
50L
80L
136L
220L
420L
620L
Interior Dimension
(mm)W×D×H
340×320×320
420x395x350
450×400×450
550×450×550
600×500×750
640×585×1355
840×600×1355
Overall Dimension
(mm)W×D×H
620×530×490
700x610x520
740×618×630
840×670×730
880×720×930
780×750×1880
980×800×1880
Shelves
2(pcs)
2(pcs)
2(pcs)
3(pcs)
4(pcs)
Timing Range
1~9999min
Drying Oven
Energy-saving And Environmental
VoltagePower
380V9kw
Name: Drying Oven
Model: PS-4A
Feature:
Model
Production
Capacity
Pan Size
Diameter
Weight
Voltage
Power
4A
6 Disk/Times
800×800
800×800×1000
300kg
380V
9kw
VoltagePower
380V9kw
Name: Drying Oven
Model: PS-4A
Feature:
Model
Production
Capacity
Pan Size
Diameter
Weight
Voltage
Power
4A
6 Disk/Times
800×800
800×800×1000
300kg
380V
9kw
Drying Oven
drying oven
features:
100 grades filter is equipped on top of inlet and outlet part of the drying oven.
GMP standard
drying oven
Working Principle
Press the button after bottles entering into the drying oven, then the machine will control the whole process conforming to rated program. Press the button after the process is finished, open and door and take away to substances, then the whole process is finished.
Characteristics
1. Fit for different situations for drying and sterilization which can be carried out automatically
2. Hot blast heating is adopted with low temperature difference
3. 100 grades filter is equipped on top of inlet and outlet part of the drying oven, as well as side of the machine conforming to GMP standard.
4.The gate is in turn-on form with automatic controlling wedge closing device
5. Man-machine interface is in the form of touching type LCD with PLC controlling core, PID regulating function is equipped to precisely control the temperature.
6. Temperature is controlled by silicon controlled voltage regulating module which has no contact, low impulsion on electric net and lower thermal inertia
7. Intake fan motor adopts stepless speed regulation of imported transducer
Technical Parameters
Temperature of working chamber: 50-300°c
Temperature evenness: ±2°c
Purifying grade: 100 grade
Power supply: three-phase four-wire 380V/50Hz
Power: 22kw
Gross Weight: about 1000kg
Overall Dimension: conforming to requirement
features:
100 grades filter is equipped on top of inlet and outlet part of the drying oven.
GMP standard
drying oven
Working Principle
Press the button after bottles entering into the drying oven, then the machine will control the whole process conforming to rated program. Press the button after the process is finished, open and door and take away to substances, then the whole process is finished.
Characteristics
1. Fit for different situations for drying and sterilization which can be carried out automatically
2. Hot blast heating is adopted with low temperature difference
3. 100 grades filter is equipped on top of inlet and outlet part of the drying oven, as well as side of the machine conforming to GMP standard.
4.The gate is in turn-on form with automatic controlling wedge closing device
5. Man-machine interface is in the form of touching type LCD with PLC controlling core, PID regulating function is equipped to precisely control the temperature.
6. Temperature is controlled by silicon controlled voltage regulating module which has no contact, low impulsion on electric net and lower thermal inertia
7. Intake fan motor adopts stepless speed regulation of imported transducer
Technical Parameters
Temperature of working chamber: 50-300°c
Temperature evenness: ±2°c
Purifying grade: 100 grade
Power supply: three-phase four-wire 380V/50Hz
Power: 22kw
Gross Weight: about 1000kg
Overall Dimension: conforming to requirement
Drying Oven
1.High thermal efficiency & Low wastage
2.Drying oven /furnace with double-door
3. Automatic control the temperature
Drying Oven/furnace Standardized Design Technical Parameter:
Type
Voltage
(AC. V)
Capacity
(Kw)
Upper Temp. Limit()
Sensitivity
()
Motor Capacity (W)
Inner Cavity Size (mm)
Shell Size(mm)
881-1
220
1.3
10-400
±2
40
350×450×450
500×810×813
881-2
220
3
10-400
±2
40
450×550×550
600×900×913
881-3
220
4.5
10-400
±2
40
500×600×750
650×960×1113
881-4
3×380
9
10-400
±2
180
800×800×1000
1000×1170×1580
881-5
3×380
12
10-400
±2
180
1000×1000×1000
1200×1370×1580
881-6
3×380
15
10-400
±2
180
1000×1200×1200
1200×1570×1780
881-7
3×380
18
10-400
±2
180
1000×1200×1500
1200×1600×2100
881-8
3×380
21
10-400
±2
180
1200×1500×1500
1400×1900×2100
2.Drying oven /furnace with double-door
3. Automatic control the temperature
Drying Oven/furnace Standardized Design Technical Parameter:
Type
Voltage
(AC. V)
Capacity
(Kw)
Upper Temp. Limit()
Sensitivity
()
Motor Capacity (W)
Inner Cavity Size (mm)
Shell Size(mm)
881-1
220
1.3
10-400
±2
40
350×450×450
500×810×813
881-2
220
3
10-400
±2
40
450×550×550
600×900×913
881-3
220
4.5
10-400
±2
40
500×600×750
650×960×1113
881-4
3×380
9
10-400
±2
180
800×800×1000
1000×1170×1580
881-5
3×380
12
10-400
±2
180
1000×1000×1000
1200×1370×1580
881-6
3×380
15
10-400
±2
180
1000×1200×1200
1200×1570×1780
881-7
3×380
18
10-400
±2
180
1000×1200×1500
1200×1600×2100
881-8
3×380
21
10-400
±2
180
1200×1500×1500
1400×1900×2100
Drying PAC and PFS of Liquid Equipment
Drying PAC and PFS of Liquid Equipment
1. High thermal efficiency
2. Short drying time
3. High drying efficiency
Drying PAC and PFS of Liquid Equipment
Working Principle
Drum dryers with heat conduction is a continuous type drying equipment rotation.Rotation of the lower part of roller,through materials manger adhesion materials a certainthickeness.Heat transfer by pipeline to the durm wall,conduction to the materials which adhere to the surface of durm that the moisture to evaportate.The dried materials will be scraped by the scraper which installed on the surface of the durm.
Specification
Modle
Size of Drum ( mm )
Effective Heating Area ( square metre
)
Drying Velocity ( kg.
H2
O/h
Motor Power
( kw )
Outside Measurement (W*L*H)
780
78
0
×1200
0.936
60-125
0.75
210
0
×1400×1350
780
780
×1500
1.17
75-160
1.1
2400
×1400×1350
780
780
×1600
1.248
80-170
1.1
2500
×1400×1350
Characteristic
1. High thermal efficiency.Drum dryers due to heat-transfer mechanism is heat exchange,heat transfer is the direction of un change throughout the operation cycle. In addition to loss of heat and radiation, other energy used for drying wet materials. Thermal efficiency up to 80% -90%.
2. Flexible working,Wide practical. Drum dryers can be adjusted in many ways,such as concentration of materials,the thickness of adhesion materials, Heating medium temperature, rotation speed of drum.Those adjustment all can change Drying efficiency.This characteristics let it's easier to operate and adapt to dry variety materials meets different production requirements
3. Short drying time. In generally ,The drying time of materials only 10 - 15 seconds, more suitable for heat-sensitive materials
4. High Drying efficiency.Because the thickness of adhesion materials usually 0.3-1.5mm in drum wall and unchanging heat direction,so that the speed of surface evaporation can maintain 30-70KGH2O/m2.h Used on chemical industry, dyestuff, pharmaceutical, food, metallurgical and other industries for drying of liquid and viscous materials
1. High thermal efficiency
2. Short drying time
3. High drying efficiency
Drying PAC and PFS of Liquid Equipment
Working Principle
Drum dryers with heat conduction is a continuous type drying equipment rotation.Rotation of the lower part of roller,through materials manger adhesion materials a certainthickeness.Heat transfer by pipeline to the durm wall,conduction to the materials which adhere to the surface of durm that the moisture to evaportate.The dried materials will be scraped by the scraper which installed on the surface of the durm.
Specification
Modle
Size of Drum ( mm )
Effective Heating Area ( square metre
)
Drying Velocity ( kg.
H2
O/h
Motor Power
( kw )
Outside Measurement (W*L*H)
780
78
0
×1200
0.936
60-125
0.75
210
0
×1400×1350
780
780
×1500
1.17
75-160
1.1
2400
×1400×1350
780
780
×1600
1.248
80-170
1.1
2500
×1400×1350
Characteristic
1. High thermal efficiency.Drum dryers due to heat-transfer mechanism is heat exchange,heat transfer is the direction of un change throughout the operation cycle. In addition to loss of heat and radiation, other energy used for drying wet materials. Thermal efficiency up to 80% -90%.
2. Flexible working,Wide practical. Drum dryers can be adjusted in many ways,such as concentration of materials,the thickness of adhesion materials, Heating medium temperature, rotation speed of drum.Those adjustment all can change Drying efficiency.This characteristics let it's easier to operate and adapt to dry variety materials meets different production requirements
3. Short drying time. In generally ,The drying time of materials only 10 - 15 seconds, more suitable for heat-sensitive materials
4. High Drying efficiency.Because the thickness of adhesion materials usually 0.3-1.5mm in drum wall and unchanging heat direction,so that the speed of surface evaporation can maintain 30-70KGH2O/m2.h Used on chemical industry, dyestuff, pharmaceutical, food, metallurgical and other industries for drying of liquid and viscous materials
Drying Process----drier
Our rotary dryer is made up of Stove and Main Rotary Dryer, which can realize to reduce the moisture from 60% to 10%.
Drying Process:
The best moisture content to pelletizing is about 13-15%. Our rotary dryer is made up of Stove and Main Rotary Dryer, which can realize to reduce the moisture from 60% to 10%. Our stove is fueled by sawdust, wasted wood, coal, which can save electricity consumption largely.
Our is specially designed for energy saving purpose, the outside of the dryer is covered with special cotton material sheet to prevent the heat outrunning.
Drier:
Technical parameters:
Rotary dryer is the choice for high throughput capacity applications involving high moisture, friable, free-flowing commodity products and by-products. A rotating drum and strategically positioned flights combine to lift and shower product evenly through the air stream. Thermostatically controlled discharge air temperature assures precise final moistures and great sensitivity to varying product conditions. Single-pass or three-pass configurations are available to match product characteristics. Heating options include steam, gas, oil, thermal oil and auxiliary
After the damp raw material is put into the dryer from on end, it is turned over through string-up rake inside the cylinder and distributed uniform in the dryer and contacted with countercurrent hot air fully. It speeds up heat and mass conducting of dry. During the oeriod of dry. raw material is effected by stirring-up rake with gradient and hot air. it can be moved and passed through the dry region and to star valve and then discharge the finished product.
Technical parameters:
Model
Diameter (mm)
Length(m)
Power(kw)
revolution(r/min)
HZG6
600
4,5,6,7,8
3-5.5
3-20 adjustment
HZG8
800
4,5,6,7,8,9,10
5.5-7.5
HZG10
1000
6,7,8,9,10,11,12
5.5-7.5
HZG12
1200
6,8,10,12,14,16
7.5-11
Drying Process:
The best moisture content to pelletizing is about 13-15%. Our rotary dryer is made up of Stove and Main Rotary Dryer, which can realize to reduce the moisture from 60% to 10%. Our stove is fueled by sawdust, wasted wood, coal, which can save electricity consumption largely.
Our is specially designed for energy saving purpose, the outside of the dryer is covered with special cotton material sheet to prevent the heat outrunning.
Drier:
Technical parameters:
Rotary dryer is the choice for high throughput capacity applications involving high moisture, friable, free-flowing commodity products and by-products. A rotating drum and strategically positioned flights combine to lift and shower product evenly through the air stream. Thermostatically controlled discharge air temperature assures precise final moistures and great sensitivity to varying product conditions. Single-pass or three-pass configurations are available to match product characteristics. Heating options include steam, gas, oil, thermal oil and auxiliary
After the damp raw material is put into the dryer from on end, it is turned over through string-up rake inside the cylinder and distributed uniform in the dryer and contacted with countercurrent hot air fully. It speeds up heat and mass conducting of dry. During the oeriod of dry. raw material is effected by stirring-up rake with gradient and hot air. it can be moved and passed through the dry region and to star valve and then discharge the finished product.
Technical parameters:
Model
Diameter (mm)
Length(m)
Power(kw)
revolution(r/min)
HZG6
600
4,5,6,7,8
3-5.5
3-20 adjustment
HZG8
800
4,5,6,7,8,9,10
5.5-7.5
HZG10
1000
6,7,8,9,10,11,12
5.5-7.5
HZG12
1200
6,8,10,12,14,16
7.5-11
2011 China New industrial drying machinery with good quality
industrial drying machinery
1.Supply the whole production line layout
2.Italy technology but Chinese price
3.3 years'after-sa
industrial drying machinery
Gongyi Wangda Machinery Factory
, located in the west of Zhengzhou City, which has two parts, old factory is in urban nearby train station and new factory is in Zhitian Industrial Park of Gongyi.
With unique geographical condition, Wangda Machinery concentrates capital, technology, personnel, information and market as advantages, and forms to a strong company entity with more than 30,000 square meters area, 25,000 square meters standard plant and 50 million fixed assets.
Wangda Machinery always firmly follows the tenets of “reputation, best service, leading technology, quality assurance” and adheres to “people-oriented, science and technology”. We’re constantly improving product quality, manufacturing capacity. Produced on the basis of features of home and abroad manufacturers, our aerated concrete equipments operate steadily, and have been widely used in China and exported to Southeast, Asia, Africa, the Middle East and other countries.
For the sake of users’ approbation, support and expectation, Wangda Machinery will provide machines with more advanced and better quality as well as timely and quality service.
Main Use:
Rotary dryer
is mainly for dealing with material in large quantities. As reliable operation, operating flexibility, adaptability and large capacity, this dryer is widely used in metallurgy, building materials, food, light industry, chemical industry, coal, medicine and mining industries.
This generally adapted to granular powder materials. Through the way of mixing material partially, this dryer also can be used for drying sticky paste-like materials or materials with high water content.
Structure:
Rotary dryer
consists of drum shell, front and rear roller ring, gears, block roll, pinion, discharging part, reducer, motor, warm air duct, feed-in chute, furnace body and other components. Besides, we can design gas producer, combustor chamber or supporting elevator, belt conveyor, quantitative feeder, dust collector cyclone, induced draft fan, etc.
Technical Parameter:
Type
Inclination (%)
Rotation Speed(r/min)
Inlet Temperature
(°C)
Power(kw)
Capacity(t/h)
Weight(t)
Φ600×6000
3-5
3-8
≤700
3
0.5-1.5
2.9
Φ800×8000
3-5
3-8
≤700
4
0.8-2.0
3.5
Φ800×10000
3-5
3-8
≤700
4
0.8-2.5
4.5
Φ1000×10000
3-5
3-8
≤700
5.5
1.0-3.5
5.6
Φ1200×10000
3-5
3-8
≤700
7.5
1.8-5
14.5
Φ1200×12000
3-5
3-8
≤700
11
2-6
14.8
Φ1500×14000
3-5
2-6
≤800
15
3.5-9
17.8
Φ1800×14000
3-5
2-6
≤800
18
5-12
22
Φ2200×16000
3-5
1.5-6
≤800
30
12-25
36
Φ2400×18000
3-5
1.5-5
≤800
37
18-30
52
Φ3000×20000
3-5
1.5-5
≤800
55
25-35
80
Φ3000×25000
3-5
1.5-5
≤800
75
32-40
86
Remarks:
(The above capacity is on the basis of 18% moisture content of limestone. Drying capacity is different according to the difference of material features, moisture content and drying temperature.)
Showcase:
1.Supply the whole production line layout
2.Italy technology but Chinese price
3.3 years'after-sa
industrial drying machinery
Gongyi Wangda Machinery Factory
, located in the west of Zhengzhou City, which has two parts, old factory is in urban nearby train station and new factory is in Zhitian Industrial Park of Gongyi.
With unique geographical condition, Wangda Machinery concentrates capital, technology, personnel, information and market as advantages, and forms to a strong company entity with more than 30,000 square meters area, 25,000 square meters standard plant and 50 million fixed assets.
Wangda Machinery always firmly follows the tenets of “reputation, best service, leading technology, quality assurance” and adheres to “people-oriented, science and technology”. We’re constantly improving product quality, manufacturing capacity. Produced on the basis of features of home and abroad manufacturers, our aerated concrete equipments operate steadily, and have been widely used in China and exported to Southeast, Asia, Africa, the Middle East and other countries.
For the sake of users’ approbation, support and expectation, Wangda Machinery will provide machines with more advanced and better quality as well as timely and quality service.
Main Use:
Rotary dryer
is mainly for dealing with material in large quantities. As reliable operation, operating flexibility, adaptability and large capacity, this dryer is widely used in metallurgy, building materials, food, light industry, chemical industry, coal, medicine and mining industries.
This generally adapted to granular powder materials. Through the way of mixing material partially, this dryer also can be used for drying sticky paste-like materials or materials with high water content.
Structure:
Rotary dryer
consists of drum shell, front and rear roller ring, gears, block roll, pinion, discharging part, reducer, motor, warm air duct, feed-in chute, furnace body and other components. Besides, we can design gas producer, combustor chamber or supporting elevator, belt conveyor, quantitative feeder, dust collector cyclone, induced draft fan, etc.
Technical Parameter:
Type
Inclination (%)
Rotation Speed(r/min)
Inlet Temperature
(°C)
Power(kw)
Capacity(t/h)
Weight(t)
Φ600×6000
3-5
3-8
≤700
3
0.5-1.5
2.9
Φ800×8000
3-5
3-8
≤700
4
0.8-2.0
3.5
Φ800×10000
3-5
3-8
≤700
4
0.8-2.5
4.5
Φ1000×10000
3-5
3-8
≤700
5.5
1.0-3.5
5.6
Φ1200×10000
3-5
3-8
≤700
7.5
1.8-5
14.5
Φ1200×12000
3-5
3-8
≤700
11
2-6
14.8
Φ1500×14000
3-5
2-6
≤800
15
3.5-9
17.8
Φ1800×14000
3-5
2-6
≤800
18
5-12
22
Φ2200×16000
3-5
1.5-6
≤800
30
12-25
36
Φ2400×18000
3-5
1.5-5
≤800
37
18-30
52
Φ3000×20000
3-5
1.5-5
≤800
55
25-35
80
Φ3000×25000
3-5
1.5-5
≤800
75
32-40
86
Remarks:
(The above capacity is on the basis of 18% moisture content of limestone. Drying capacity is different according to the difference of material features, moisture content and drying temperature.)
Showcase:
Drying Tunnel
variety, structural diversity, wide range of uses
Introduction:
Line drying tunnel applicable to all types of objects through the hot air to dry after wet work.
Line body with stainless steel mesh or PVC belt running straight up and down cycle of closed-end way.
Electric heating temperature control air circulation, drying power operation for the object.
Use of a wide range of drying tunnel line, drying line for the metal, electroplating, chemical, packaging, electronics, leather, painting, screen printing, plastics, food and other industries.
Drying tunnel line features: drying tunnel line is warming rapidly, the product even heat, drying line can be sustainable with the continuous production of dried plant product line, drying line may also need to adjust the baking temperature by the production, transmission speed and
time, can greatly increase production efficiency, using simple and convenient.
Drying tunnel line of the transmission mode: chain mesh, mesh belt, string rod, Teflon-type, belt type.
Heating method: heating pipe + transport wind, quartz tube heating, diesel burner heating, far infrared radiation heating.
Technical parameters:
(1) Dimensions: length 20 meters, outside the width of 0.8 m, 0.65 m in width, 1.3 meters high, 5 meters long feed section, drying section 12 meters long, a material part of a long 3 m; rack with
40 × 80 mm welded square pass, the line beam with 2 mm thick body made cold plate, spray (non-P injection) corrosion-resistant, easy to clean.
(2) drying parts: 6 section of the furnace liner, furnace ceiling height 0.28 meters, drying area 12 meters in length, liner made by 1.2mm galvanized plate, 60 mm high-temperature insulation to prevent rust
oxidation; bottom with insulation.
(3) electrical parts: power supply 380V, 30A, three-phase five-wire system, power 40KW, using 2P benefit Taiwan's Love Frequency inverter 1.5KW, transmission speed of 0.5-8 m / min Adjustable; by Japan RKC Smart
thermostat, the temperature from room temperature to 250 °C adjustable, self-tuning PID function, automatic constant temperature, over-temperature power failure, over temperature settings, dual thermostat control, leakage protection function, the internal temperature difference of ± 3 degrees; other
Control circuit devices are controlled by Mitsubishi Electric; each piece of the furnace chamber air motor with 2 sets of transport, for a total of 12 units with 10-inch wheels shipped air damper, each loaded nine stainless steel heating pipes, each uniformly distributed in the furnace chamber 500KW
inside, each furnace temperature can be controlled separately, each piece easy to set different temperatures;
(4) Transmission parts: the use of imported stainless steel mesh chain belt, head tail with active-passive conditioning drum, the middle has no power-dragging roller bearing to prevent the belt run edge.
Introduction:
Line drying tunnel applicable to all types of objects through the hot air to dry after wet work.
Line body with stainless steel mesh or PVC belt running straight up and down cycle of closed-end way.
Electric heating temperature control air circulation, drying power operation for the object.
Use of a wide range of drying tunnel line, drying line for the metal, electroplating, chemical, packaging, electronics, leather, painting, screen printing, plastics, food and other industries.
Drying tunnel line features: drying tunnel line is warming rapidly, the product even heat, drying line can be sustainable with the continuous production of dried plant product line, drying line may also need to adjust the baking temperature by the production, transmission speed and
time, can greatly increase production efficiency, using simple and convenient.
Drying tunnel line of the transmission mode: chain mesh, mesh belt, string rod, Teflon-type, belt type.
Heating method: heating pipe + transport wind, quartz tube heating, diesel burner heating, far infrared radiation heating.
Technical parameters:
(1) Dimensions: length 20 meters, outside the width of 0.8 m, 0.65 m in width, 1.3 meters high, 5 meters long feed section, drying section 12 meters long, a material part of a long 3 m; rack with
40 × 80 mm welded square pass, the line beam with 2 mm thick body made cold plate, spray (non-P injection) corrosion-resistant, easy to clean.
(2) drying parts: 6 section of the furnace liner, furnace ceiling height 0.28 meters, drying area 12 meters in length, liner made by 1.2mm galvanized plate, 60 mm high-temperature insulation to prevent rust
oxidation; bottom with insulation.
(3) electrical parts: power supply 380V, 30A, three-phase five-wire system, power 40KW, using 2P benefit Taiwan's Love Frequency inverter 1.5KW, transmission speed of 0.5-8 m / min Adjustable; by Japan RKC Smart
thermostat, the temperature from room temperature to 250 °C adjustable, self-tuning PID function, automatic constant temperature, over-temperature power failure, over temperature settings, dual thermostat control, leakage protection function, the internal temperature difference of ± 3 degrees; other
Control circuit devices are controlled by Mitsubishi Electric; each piece of the furnace chamber air motor with 2 sets of transport, for a total of 12 units with 10-inch wheels shipped air damper, each loaded nine stainless steel heating pipes, each uniformly distributed in the furnace chamber 500KW
inside, each furnace temperature can be controlled separately, each piece easy to set different temperatures;
(4) Transmission parts: the use of imported stainless steel mesh chain belt, head tail with active-passive conditioning drum, the middle has no power-dragging roller bearing to prevent the belt run edge.
Drying device
drying device
1.high production standard
2.good regulation
3.high technical guidance
4.ISO9001
Drying device
(contact Windy Fan +8613838028678)
Drying machine description:
Rotary dryer is the materials drying device.the material in the rotating cylinder is dried in the process of spiral leaf and discontinuous spiral feed tube between the inner and outer turn-back.Sleeve structure can multiplied reduce the length of the dryer,as the cooling surface reduces,so that the loss of heat is reduced,double the number of heat exchange surface greatly enhance thermal efficiency.for the nontouch tobacco materials,multi-tube rotary dryer provided the inside smoke pipe and circular pipe respectively in both inside and outside the cylinder,the smoke flue pipe use of radial to communicate, the same energy efficient, it is easy to see,for the heat material and cool media,the machine used as sleeve rotary cooler machine.
Function:
This serial of dryer machine widely used in the cement, mining, building materials,chemicals, food, fertilizer production and other industries of material drying,inorder to control the temperature of the dryer,we set the heating coil in the out and in material device.it can show the temperature changes of the dryers material access through the thermometer.in order to better control the body temperature (usually 350-380 degrees) provides a basis.
Main technical parameters:
type mm
speed r/min
dip %
intake air temperature
capacity t/h
weight t
GZ800×8000
3.8
5
≤700
0.8-2.0
3.5
GZ1000×10000
3.8
53
≤700
1.0-3.5
5. 6
GZ1200×10000
3
5
≤700
1.8-5
14.04
GZ1500×12000
2.08
5
≤800
3.3-7.5
17.76
GZ1800×14000
2,08
5
≤800
5-9
29
GZ2200×12000
4.7
5
≤700
6-12
33
GZ2200×18000
4
5
≤800
10-15
53.3
Service Promise
Before-sale services:We guide customers to choose the best and applicable device; provide the advanced, energy-saving and practical technological process, as well as we are responsible for the planing and design of the site.
Sale services: Products must be inspected Strictly before being sold; customers are invited to simulate and test machine on-the-spot and raise objections; in accordance with the agreements stipulated in the contract, we will arrange delivery.
After-sale services:Our company will send professional engineers to guide device installation, debugg and train operators until customers are fully satisfied. Moreover, we will design and produce machines according to the special requirements of customers
Solemn Promise:The quality guarantee period of machines is one year except the wearing parts.
Warm tips: The prices in the web only to be reference, according to raw material’s price fluctuations, Specific price is subject to the call.
Henan Zhongcheng Machinery Co.Ltd
Address: Xigang Industrial Development Area, Zhengshang Road, Zhengzhou, Henan, China
Phone:+86-0371-67826860
Fax: +86-0371-67826861
Mobile:+86-13838028678
1.high production standard
2.good regulation
3.high technical guidance
4.ISO9001
Drying device
(contact Windy Fan +8613838028678)
Drying machine description:
Rotary dryer is the materials drying device.the material in the rotating cylinder is dried in the process of spiral leaf and discontinuous spiral feed tube between the inner and outer turn-back.Sleeve structure can multiplied reduce the length of the dryer,as the cooling surface reduces,so that the loss of heat is reduced,double the number of heat exchange surface greatly enhance thermal efficiency.for the nontouch tobacco materials,multi-tube rotary dryer provided the inside smoke pipe and circular pipe respectively in both inside and outside the cylinder,the smoke flue pipe use of radial to communicate, the same energy efficient, it is easy to see,for the heat material and cool media,the machine used as sleeve rotary cooler machine.
Function:
This serial of dryer machine widely used in the cement, mining, building materials,chemicals, food, fertilizer production and other industries of material drying,inorder to control the temperature of the dryer,we set the heating coil in the out and in material device.it can show the temperature changes of the dryers material access through the thermometer.in order to better control the body temperature (usually 350-380 degrees) provides a basis.
Main technical parameters:
type mm
speed r/min
dip %
intake air temperature
capacity t/h
weight t
GZ800×8000
3.8
5
≤700
0.8-2.0
3.5
GZ1000×10000
3.8
53
≤700
1.0-3.5
5. 6
GZ1200×10000
3
5
≤700
1.8-5
14.04
GZ1500×12000
2.08
5
≤800
3.3-7.5
17.76
GZ1800×14000
2,08
5
≤800
5-9
29
GZ2200×12000
4.7
5
≤700
6-12
33
GZ2200×18000
4
5
≤800
10-15
53.3
Service Promise
Before-sale services:We guide customers to choose the best and applicable device; provide the advanced, energy-saving and practical technological process, as well as we are responsible for the planing and design of the site.
Sale services: Products must be inspected Strictly before being sold; customers are invited to simulate and test machine on-the-spot and raise objections; in accordance with the agreements stipulated in the contract, we will arrange delivery.
After-sale services:Our company will send professional engineers to guide device installation, debugg and train operators until customers are fully satisfied. Moreover, we will design and produce machines according to the special requirements of customers
Solemn Promise:The quality guarantee period of machines is one year except the wearing parts.
Warm tips: The prices in the web only to be reference, according to raw material’s price fluctuations, Specific price is subject to the call.
Henan Zhongcheng Machinery Co.Ltd
Address: Xigang Industrial Development Area, Zhengshang Road, Zhengzhou, Henan, China
Phone:+86-0371-67826860
Fax: +86-0371-67826861
Mobile:+86-13838028678
Drying equipment for sand,coal,ore from Huachang (manufacturer)
Drying equipment
1.Best selling rotary dryer
2.Reasonable structure
3.High precision temperature control
4.high capacity
It is widely used in the building materials,metallurgy,chemical industry,cement industry for drying the limestone slag,coal powder,mineral slag,clay and other materials.
It is mainly consists the rotary body,lifting plate,gear,supporting device and the sealing device.
Features:
Reasonable structure
Fine made
High capacity
Energy saving
Easy operation
Model
Diameter of Rotating Tube(mm)
length of RotatingTube
(m)
Slope
(a°)
Rotary Speed
(r/m)
Weight
(T)
Power(Kw)
Capacity(M3)
0.6×8
600
8
3-5
8
5.1
4
2.26
0.8×10
800
10
3-5
7.2
6.9
4
5.02
1.0×10
1000
10
3-5
6.73
7.5
5.5
7.85
1.2×12
1200
12
3-5
5.8
13.1
11
13.31
1.5×12
1500
12
3-5
4.8
22.3
15
21.2
2.2×14
2200
14
3-5
3.2
52.8
30
53.22
2.4×18
2400
18
3-5
3
73.3
37
81.43
2.4×24
2800
24
3-5
2.59
97
75
147.8
1.Best selling rotary dryer
2.Reasonable structure
3.High precision temperature control
4.high capacity
It is widely used in the building materials,metallurgy,chemical industry,cement industry for drying the limestone slag,coal powder,mineral slag,clay and other materials.
It is mainly consists the rotary body,lifting plate,gear,supporting device and the sealing device.
Features:
Reasonable structure
Fine made
High capacity
Energy saving
Easy operation
Model
Diameter of Rotating Tube(mm)
length of RotatingTube
(m)
Slope
(a°)
Rotary Speed
(r/m)
Weight
(T)
Power(Kw)
Capacity(M3)
0.6×8
600
8
3-5
8
5.1
4
2.26
0.8×10
800
10
3-5
7.2
6.9
4
5.02
1.0×10
1000
10
3-5
6.73
7.5
5.5
7.85
1.2×12
1200
12
3-5
5.8
13.1
11
13.31
1.5×12
1500
12
3-5
4.8
22.3
15
21.2
2.2×14
2200
14
3-5
3.2
52.8
30
53.22
2.4×18
2400
18
3-5
3
73.3
37
81.43
2.4×24
2800
24
3-5
2.59
97
75
147.8
Drying equipment/Rotary Dryer
Rotary Dryer
1)Superior quality
2)High-quality materials
3)Highly skilled manufacturing process
The dryer is a type of industrial dryer employed to reduce or minimize the liquid moisture content of the material it is handling by bringing it into direct contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.
Model
Specifications
Speed
(r/m)
Power
(kw)
Weight
(T)
Diameter
(m)
Length
(m)
Gradient
(%)
Φ1×12M
1.0
12
5
6.2
7.5
13.2
Φ1.2×12M
1.2
12
5
5.99
11
15.7
Φ1.2×14M
1.2
14
5
3.99
11
17.3
Φ1.5×12M
1.5
12
5
4.02
15
17.4
Φ1.8×14M
1.8
14
5
4.59
18.5
27.2
Φ1.8×16M
1.8
16
5
5.48
22
39.6
Φ2.0×14M
2.0
14
5
4.59
18.5
31.6
Φ2.0×16M
2.0
16
5
4.59
30
43.9
Φ2.2×14M
2.2
14
5
4.59
22
37.4
Φ2.2×27M
2.2
27
5
4.58
37
79.2
Φ2.4×14M
2.4
14
5
3.6
30
46.2
Φ2.4×18M
2.4
18
5
3.12
37
66.7
Φ2.8×18M
2.8
18
5
3.12
45
89.3
Φ3.0×20M
3.0
20
5
3.67
55
95.5
Φ3.2×22M
3.2
22
5
3.4
75
141.6
Φ3.6×25M
3.6
25
5
3.1
110
188.6
SINON Machinery Manufacturing Co,.Ltd
Address:North of Yong'an Road,Gongyi city,Henan Province,China
Tel +8637169537555
+8637164373688
Fax +8637164373899
1)Superior quality
2)High-quality materials
3)Highly skilled manufacturing process
The dryer is a type of industrial dryer employed to reduce or minimize the liquid moisture content of the material it is handling by bringing it into direct contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.
Model
Specifications
Speed
(r/m)
Power
(kw)
Weight
(T)
Diameter
(m)
Length
(m)
Gradient
(%)
Φ1×12M
1.0
12
5
6.2
7.5
13.2
Φ1.2×12M
1.2
12
5
5.99
11
15.7
Φ1.2×14M
1.2
14
5
3.99
11
17.3
Φ1.5×12M
1.5
12
5
4.02
15
17.4
Φ1.8×14M
1.8
14
5
4.59
18.5
27.2
Φ1.8×16M
1.8
16
5
5.48
22
39.6
Φ2.0×14M
2.0
14
5
4.59
18.5
31.6
Φ2.0×16M
2.0
16
5
4.59
30
43.9
Φ2.2×14M
2.2
14
5
4.59
22
37.4
Φ2.2×27M
2.2
27
5
4.58
37
79.2
Φ2.4×14M
2.4
14
5
3.6
30
46.2
Φ2.4×18M
2.4
18
5
3.12
37
66.7
Φ2.8×18M
2.8
18
5
3.12
45
89.3
Φ3.0×20M
3.0
20
5
3.67
55
95.5
Φ3.2×22M
3.2
22
5
3.4
75
141.6
Φ3.6×25M
3.6
25
5
3.1
110
188.6
SINON Machinery Manufacturing Co,.Ltd
Address:North of Yong'an Road,Gongyi city,Henan Province,China
Tel +8637169537555
+8637164373688
Fax +8637164373899
Drying equipment/rotary dryer
1.Drying equipment/rotary dryer
2.Continuous operation
3.Simple structure
4.Low maintenance costs
5.Applicable to a wide ran
Drying equipment/rotary dryer
Revolution of tube drying machinery applise to buiding material,metallurgy,chemical industry,cement industrymaterial such as mineral waste residue,clay broadly,Throw up and scatter commponent made up of such as expecting that board,drive are equpped with,propping up the device and the sealing washer mainly from the solid of revolution. Have strcture reasonableness,is of excellent workmanship,output is high,energy consumption is low ,move round to wait for merit conveniently.
Technical parameter list.
Product specifications
Capacity
Motor
Reducer
SizeLength × width × height
(mm)
Weight (T)
Volume(M
3
Speed (r/min)
Gradient%
Model
Power (Kw )
Model
Φ1×10M
7.85
6.73
3-5
Y132M2-6
5.5
ZL350--25
10000×1876×2069
7.5
Φ1.2×6M
6.8
5.8
3-5
Y132M2-6
5.5
ZL359--25
6000×2159×2475
7.97
Φ1.2×8M
9.1
5.8
3-5
Y132M2-6
5.5
ZL350--25
8000×2159×2475
8.75
Φ1.2×10M
11.31
5.8
3-5
Y160M-6
7.5
ZL350--25
10000×2159×2475
9.52
Φ1.2×12M
13.31
5.8
3-5
Y160L-6
11
ZQ500--31.5
12000×2159×2475
13.1
Φ1.5×8M
14.14
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
8000×2655×2895
15.74
Φ1.5×10M
17.67
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
10000×2655×2895
17.93
Φ1.5×12M
21.2
4.8
3-5
180L-6
15
ZQ650--31.5
12000×2655×2895
22.3
Φ1.5×14M
24.9
4.8
3-5
180L-6
15
ZQ650--31.5
14000×2655×2895
25.1
2.Continuous operation
3.Simple structure
4.Low maintenance costs
5.Applicable to a wide ran
Drying equipment/rotary dryer
Revolution of tube drying machinery applise to buiding material,metallurgy,chemical industry,cement industrymaterial such as mineral waste residue,clay broadly,Throw up and scatter commponent made up of such as expecting that board,drive are equpped with,propping up the device and the sealing washer mainly from the solid of revolution. Have strcture reasonableness,is of excellent workmanship,output is high,energy consumption is low ,move round to wait for merit conveniently.
Technical parameter list.
Product specifications
Capacity
Motor
Reducer
SizeLength × width × height
(mm)
Weight (T)
Volume(M
3
Speed (r/min)
Gradient%
Model
Power (Kw )
Model
Φ1×10M
7.85
6.73
3-5
Y132M2-6
5.5
ZL350--25
10000×1876×2069
7.5
Φ1.2×6M
6.8
5.8
3-5
Y132M2-6
5.5
ZL359--25
6000×2159×2475
7.97
Φ1.2×8M
9.1
5.8
3-5
Y132M2-6
5.5
ZL350--25
8000×2159×2475
8.75
Φ1.2×10M
11.31
5.8
3-5
Y160M-6
7.5
ZL350--25
10000×2159×2475
9.52
Φ1.2×12M
13.31
5.8
3-5
Y160L-6
11
ZQ500--31.5
12000×2159×2475
13.1
Φ1.5×8M
14.14
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
8000×2655×2895
15.74
Φ1.5×10M
17.67
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
10000×2655×2895
17.93
Φ1.5×12M
21.2
4.8
3-5
180L-6
15
ZQ650--31.5
12000×2655×2895
22.3
Φ1.5×14M
24.9
4.8
3-5
180L-6
15
ZQ650--31.5
14000×2655×2895
25.1
Drying equipment
Because of the difference product and special requests of customers, we supply different equipment for your reference and drying
Sales manager and engineer Mr Kenny
Because of the difference product and special requests of customers, we supply different equipment for your reference and drying machine, spray dryer. For any more information, you can contact our
Sales manager and engineer Mr Kenny
Because of the difference product and special requests of customers, we supply different equipment for your reference and drying machine, spray dryer. For any more information, you can contact our
Drying equipment
This series machine is our new product with multifunction of washing, dehydration and drying. It is more economical and requires
1. Advanced electric system to lower consumption of electricity.
2. This series machine is made of high quality stainless steel.
3. The frequency converter could adjust speed more smoothly.
4. This series machine is controlled by microcomputer chip and the intelligent control program makes the work more convenient.
5. The concise and compact structure makes the equipment more convenient to operate and maintain.
1. Advanced electric system to lower consumption of electricity.
2. This series machine is made of high quality stainless steel.
3. The frequency converter could adjust speed more smoothly.
4. This series machine is controlled by microcomputer chip and the intelligent control program makes the work more convenient.
5. The concise and compact structure makes the equipment more convenient to operate and maintain.
Drying machine - LPG series high speed centrifuge spray dryer
spray dryer is the equipment which can make liquid to powder
DESCRIPTION
After fresh air is filtered and heated, it enters into the air distributor which on the top of the drier. The hot air in spiral form equably enters into the drying room. When liquid raw material are passed through the high-speed centrifugal sprayer on the top of the tower, it will be rotated and sprayed into the extreme slim mist liquid beads. Raw material can be dried to the final products instantly while it contact with the heatedair. Finished products are discharged continuously from bottom of the drying tower and cyclones segregator. Wasted air is discharged from blower.
FEATURES
1.Drying speed is rapid. When liquid raw material is atomized, the surface of the material will be enlarged greatly. In the hot airflow, 95% - 98% of water can be evaporated instantly. Time of completing the drying is several seconds. This is especially adapt to dry heating sensitive material.
2.Finished products have high quality, high-purity, good uniformity, good flow capability & solubility advantages.
3.Simple and stable operation , convenient control and debugging, easy to achieve automatic operation
4. Process of production is simple, it is an ideal choice for liquid material which contains 40%-90% of water and want to dry it to powder once, this type of machine can reduce the procedure of smash and sieve, the operational environment is superior , always clean, and under healthful condition, it also can avoid powder flying while drying.
TECHNICAL PARAMETESR
LPG-5
LPG-25
LPG-50
LPG-100
LPG-150
LPG-200
LPG-500
LPG-800
LPG-1000
LPG-2000
LPG-3000
LPG-4500
LPG-6500
Inlet temperature C
140-350 automatically controlled
Outlet teperature C
80-90
Centritugal spraying nonzzle
High Speed centrifugal atomizer
Centritugal spraying nonzzle (KG/H)
5
25
50
100
150
200
500
800
1000
200
3000
4500
6500
Rotation speed(r.p.m)
25000
22000
21500
18000
16000
12000-13000
11000-12000
Spraying disc diameter(mm)
60
120
150
180-210
Decided in accordance with the
requirements of process
Max,Electric heating power(kw)
8
31.5
120
81
99
Dride powder restoring rate ()
≥95
Length of convered area (m)
1.6
4
4.5
5.2
7
7.5
12.5
13.5
14.5
Width of convered area (m)
1.1
2.7
2.8
3.5
5.5
6
8
12
14
Depends on working process,
manufacturing conditions and
customers requirements to
design.
spray dryer
DESCRIPTION
After fresh air is filtered and heated, it enters into the air distributor which on the top of the drier. The hot air in spiral form equably enters into the drying room. When liquid raw material are passed through the high-speed centrifugal sprayer on the top of the tower, it will be rotated and sprayed into the extreme slim mist liquid beads. Raw material can be dried to the final products instantly while it contact with the heatedair. Finished products are discharged continuously from bottom of the drying tower and cyclones segregator. Wasted air is discharged from blower.
FEATURES
1.Drying speed is rapid. When liquid raw material is atomized, the surface of the material will be enlarged greatly. In the hot airflow, 95% - 98% of water can be evaporated instantly. Time of completing the drying is several seconds. This is especially adapt to dry heating sensitive material.
2.Finished products have high quality, high-purity, good uniformity, good flow capability & solubility advantages.
3.Simple and stable operation , convenient control and debugging, easy to achieve automatic operation
4. Process of production is simple, it is an ideal choice for liquid material which contains 40%-90% of water and want to dry it to powder once, this type of machine can reduce the procedure of smash and sieve, the operational environment is superior , always clean, and under healthful condition, it also can avoid powder flying while drying.
TECHNICAL PARAMETESR
LPG-5
LPG-25
LPG-50
LPG-100
LPG-150
LPG-200
LPG-500
LPG-800
LPG-1000
LPG-2000
LPG-3000
LPG-4500
LPG-6500
Inlet temperature C
140-350 automatically controlled
Outlet teperature C
80-90
Centritugal spraying nonzzle
High Speed centrifugal atomizer
Centritugal spraying nonzzle (KG/H)
5
25
50
100
150
200
500
800
1000
200
3000
4500
6500
Rotation speed(r.p.m)
25000
22000
21500
18000
16000
12000-13000
11000-12000
Spraying disc diameter(mm)
60
120
150
180-210
Decided in accordance with the
requirements of process
Max,Electric heating power(kw)
8
31.5
120
81
99
Dride powder restoring rate ()
≥95
Length of convered area (m)
1.6
4
4.5
5.2
7
7.5
12.5
13.5
14.5
Width of convered area (m)
1.1
2.7
2.8
3.5
5.5
6
8
12
14
Depends on working process,
manufacturing conditions and
customers requirements to
design.
spray dryer
Drying machine for Pellet Feed
Drying machine for Pellet Feed included Ascend machine, Dryer. Wet pellet feedstuff can be dried automatically.
Drying machine for Pellet Feed
(Heating type feed dryer)
The combination of the machine: Ascend machine, Dryer
Ascend: motor 0.75kw; Dryer: motor 3kw
More information please contact: Jessica
Tel: 0086 13613847731
Drying machine for Pellet Feed
(Heating type feed dryer)
The combination of the machine: Ascend machine, Dryer
Ascend: motor 0.75kw; Dryer: motor 3kw
More information please contact: Jessica
Tel: 0086 13613847731
Drying machine for coconut fibre
Drying machine for coconut fibre,It use for Roasted seeds,vegetable,particle feed,monosodium glutamate,shredded coconut .
Description:Drying machine for coconut fibre
The raw material can be spread on the converyer belt through suitable auxiliary mechanism such as distributor,vibrating belt,pulverizer of granulator.The convey or passes one cannel or serveral channels consisting of heating unit.Each heating unit is equipped with air heating and circle system.Each channel has one or sereral damp exhaust system.When the conveyor passes it,hot air passes through raw material from up to low or against.In this way it makes raw material dry uniformly.
Drying machine Mesh-Belt Dryer
Principle:
The materials are uniformly put on the mesh-belt by the material charger.The mesh-belt uses generally 12-60 mesh stainless steel wire net and it is drawn and moved inside the drier by a transmission device.The drier is composed of serveral units.For each unit,the hot air is circulated separately.Some exhausted gas is discharged with a special moisture elimination blower.The waste gas is controlled through an adjustment valve.The hot air passes through the mesh-belt covered with the material from the top to the bottom or against and this will complete the heat and mass tranfer process.This process will bring the material water away.The mesh-belt moves slowly,running speed can be freely adjusted according to the material temperature.The final products after the drying will fall into the material collector continuously.The top and low circulation units can be freely equiped according to the users demand.The unit number can be selected according to the demand.
Applications:
Roasted seeds,De-watering vegetable,particle feed,monosodium glutamate,shredded coconut stuffing,organic color,compound rubber,acryl fibre,medicine product,medicine material,small wooden product,plastic product,aging and solidification for the electronic component and device.
Technical Parameters:
Type
DW-1.2-8
DW-1.2-10
DW-1.6-8
DW-1.6-10
DW-2-8
DW-2-10
Unit Number
4
5
4
5
4
5
Belt Width (m)
1.2
1.2
1.6
1.6
2
2
Drying Section Length (m)
8
10
8
10
8
10
Thickness of Material Covered (mm)
10-80
Temperature ()
60-130
Steam Pressure (Mpa)
0.2-0.8
Steam Consumption (Kg/h)
120-300
150-375
150-375
170-740
180-500
225-600
Drying time (h)
0.2-1.2
0.25-1.5
0.2-1.2
0.25-1.5
0.2-1.2
0.25-1.5
Drying Strength (Kg H2O/h)
60-160
80-220
75-220
95-250
100-260
120-300
Total Power of Blower (Kw)
9.9
12.1
9.9
12.1
18.2
22.2
Total Power of Equipment (Kw)
11.4
13.6
11.4
13.6
19.7
23.7
Description:Drying machine for coconut fibre
The raw material can be spread on the converyer belt through suitable auxiliary mechanism such as distributor,vibrating belt,pulverizer of granulator.The convey or passes one cannel or serveral channels consisting of heating unit.Each heating unit is equipped with air heating and circle system.Each channel has one or sereral damp exhaust system.When the conveyor passes it,hot air passes through raw material from up to low or against.In this way it makes raw material dry uniformly.
Drying machine Mesh-Belt Dryer
Principle:
The materials are uniformly put on the mesh-belt by the material charger.The mesh-belt uses generally 12-60 mesh stainless steel wire net and it is drawn and moved inside the drier by a transmission device.The drier is composed of serveral units.For each unit,the hot air is circulated separately.Some exhausted gas is discharged with a special moisture elimination blower.The waste gas is controlled through an adjustment valve.The hot air passes through the mesh-belt covered with the material from the top to the bottom or against and this will complete the heat and mass tranfer process.This process will bring the material water away.The mesh-belt moves slowly,running speed can be freely adjusted according to the material temperature.The final products after the drying will fall into the material collector continuously.The top and low circulation units can be freely equiped according to the users demand.The unit number can be selected according to the demand.
Applications:
Roasted seeds,De-watering vegetable,particle feed,monosodium glutamate,shredded coconut stuffing,organic color,compound rubber,acryl fibre,medicine product,medicine material,small wooden product,plastic product,aging and solidification for the electronic component and device.
Technical Parameters:
Type
DW-1.2-8
DW-1.2-10
DW-1.6-8
DW-1.6-10
DW-2-8
DW-2-10
Unit Number
4
5
4
5
4
5
Belt Width (m)
1.2
1.2
1.6
1.6
2
2
Drying Section Length (m)
8
10
8
10
8
10
Thickness of Material Covered (mm)
10-80
Temperature ()
60-130
Steam Pressure (Mpa)
0.2-0.8
Steam Consumption (Kg/h)
120-300
150-375
150-375
170-740
180-500
225-600
Drying time (h)
0.2-1.2
0.25-1.5
0.2-1.2
0.25-1.5
0.2-1.2
0.25-1.5
Drying Strength (Kg H2O/h)
60-160
80-220
75-220
95-250
100-260
120-300
Total Power of Blower (Kw)
9.9
12.1
9.9
12.1
18.2
22.2
Total Power of Equipment (Kw)
11.4
13.6
11.4
13.6
19.7
23.7
2011 China New rotary drum dryer with high effciency
rotary drum dryer
1.Compact structure
2.Reliable performance
3.Good service
4.Low power and good design
rotary drum dryer
Gongyi Wangda Machinery Factory
, located in the west of Zhengzhou City, which has two parts, old factory is in urban nearby train station and new factory is in Zhitian Industrial Park of Gongyi.
With unique geographical condition, Wangda Machinery concentrates capital, technology, personnel, information and market as advantages, and forms to a strong company entity with more than 30,000 square meters area, 25,000 square meters standard plant and 50 million fixed assets.
Wangda Machinery always firmly follows the tenets of “reputation, best service, leading technology, quality assurance” and adheres to “people-oriented, science and technology”. We’re constantly improving product quality, manufacturing capacity. Produced on the basis of features of home and abroad manufacturers, our aerated concrete equipments operate steadily, and have been widely used in China and exported to Southeast, Asia, Africa, the Middle East and other countries.
For the sake of users’ approbation, support and expectation, Wangda Machinery will provide machines with more advanced and better quality as well as timely and quality service.
Main Use:
Ceramic sand dryer is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical. This dryer can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used around the world.
This equipment is mainly used in oil field and the finished product-ceramic sand is adopted as oil pressure support agent.
Technical Parameter:
Specification(m)
Capacity(t/h)
Main Motor
Main Reducer
Weight(t)
Power(kw)
Model
Model
Speed Ratio
Φ1.2×12m
2.5
7.5
Y160M-R3
ZL50-16-I
14.8
Φ1.5×12m
3.3-4.9
10
Y160L-6-B3
JZQ500-III-2F
17.8
Φ1.5×14m
4-6
11
Y200L1-6
JZQ500-III-2F
18.9
Φ1.8×14m
4-6
11
Y160L-6
ZQ50-16II-2
16.46
22
Φ2.2×16m
12
30
Y225M-6
JZQ750-III
31.5
36
Φ2.4×18m
10-13
37
Y250M-6
ZL85-13-I
27.16
52
Ceramic Sand Production Line:
This production line is mainly used in oil field and the finished product-ceramic sand is adopted as oil pressure support agent.
Showcase:
1.Compact structure
2.Reliable performance
3.Good service
4.Low power and good design
rotary drum dryer
Gongyi Wangda Machinery Factory
, located in the west of Zhengzhou City, which has two parts, old factory is in urban nearby train station and new factory is in Zhitian Industrial Park of Gongyi.
With unique geographical condition, Wangda Machinery concentrates capital, technology, personnel, information and market as advantages, and forms to a strong company entity with more than 30,000 square meters area, 25,000 square meters standard plant and 50 million fixed assets.
Wangda Machinery always firmly follows the tenets of “reputation, best service, leading technology, quality assurance” and adheres to “people-oriented, science and technology”. We’re constantly improving product quality, manufacturing capacity. Produced on the basis of features of home and abroad manufacturers, our aerated concrete equipments operate steadily, and have been widely used in China and exported to Southeast, Asia, Africa, the Middle East and other countries.
For the sake of users’ approbation, support and expectation, Wangda Machinery will provide machines with more advanced and better quality as well as timely and quality service.
Main Use:
Ceramic sand dryer is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical. This dryer can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used around the world.
This equipment is mainly used in oil field and the finished product-ceramic sand is adopted as oil pressure support agent.
Technical Parameter:
Specification(m)
Capacity(t/h)
Main Motor
Main Reducer
Weight(t)
Power(kw)
Model
Model
Speed Ratio
Φ1.2×12m
2.5
7.5
Y160M-R3
ZL50-16-I
14.8
Φ1.5×12m
3.3-4.9
10
Y160L-6-B3
JZQ500-III-2F
17.8
Φ1.5×14m
4-6
11
Y200L1-6
JZQ500-III-2F
18.9
Φ1.8×14m
4-6
11
Y160L-6
ZQ50-16II-2
16.46
22
Φ2.2×16m
12
30
Y225M-6
JZQ750-III
31.5
36
Φ2.4×18m
10-13
37
Y250M-6
ZL85-13-I
27.16
52
Ceramic Sand Production Line:
This production line is mainly used in oil field and the finished product-ceramic sand is adopted as oil pressure support agent.
Showcase:
Drying machine for fish food pellets Mobile: 0086-15238020698
1.It is used for drying the finished fodder pellet;
2.It can make the fodder can keep longer time.
3.Easy to operate.
Fish pellet drying machine:
It is used for drying the finished fodder pellet; so as to make the fodder can keep longer time. (At least two months)
Model
Capacity
Net Size
(m)
Net Weight
Motor
JX-H50
200-300 kg/h
1.3*1.3*1.5
180 kg
5 kw
JX-H100
400-500 kg/h
1.4*1.4*1.7
250 kg
7 kw
If you want to buy this machine, you can contact sophia
2.It can make the fodder can keep longer time.
3.Easy to operate.
Fish pellet drying machine:
It is used for drying the finished fodder pellet; so as to make the fodder can keep longer time. (At least two months)
Model
Capacity
Net Size
(m)
Net Weight
Motor
JX-H50
200-300 kg/h
1.3*1.3*1.5
180 kg
5 kw
JX-H100
400-500 kg/h
1.4*1.4*1.7
250 kg
7 kw
If you want to buy this machine, you can contact sophia
Drying machine for food
Drying machine for food
1.thermal efficiency is high
2.simple and excellent structure
3.wide application
Drying machine for food
Main applications
Hot air circulation oven is suitable for heating and dehumidifying of raw materials and products for pharmacy-eutical,chemical,foodstuff and light and heavy industries.
Main feature
Most of the hot winds are cycled within the box. It has high transmission efficiency, and can save energy. By making of the forced ventilation,the upper and lower temperature difference can be reduced. It is characterize-ed by Iow noise,stable operation,automatic temperature-control and convenient maintenance. This is according with the requirements of GMP.
Working principle
The steam or electricity is used as the heat source. The axial fan is used for heating the air of the heat exchanger in node of convective heat exchanging. The hot air stream transfers the heat to the material through the drying tray. The fresh air enters the drying box through air inlet hole for making-up. The humid air is exhausted from the dehumidifying hole. In this way, the machine keeps the proper relative humidity in the drying box.
Main technical parameters
Item No
Capacity (kg/h)
Power of fan (kw)
Steam consumption (kg/h)
Radiator area
Volume of wind (m³/h)
Amount of oven
Amount of baker
Meas. (mm)
Weight (kg)
CT-C-O
50
0.45
10
10
3450
24
1
1430×1350×2300
400
CT-C-I
100
0.45
20
20
3450
48
2
2430×1350×2300
620
CT-C-II
200
0.9
40
40
6900
96
4
2430×2350×2300
1130
CT-C-III
300
1.35
70
80
10350
144
6
3300×2350×2300
1560
CT-C-IV
400
1.8
90
100
13800
192
8
4300×2350×2300
2120
1.thermal efficiency is high
2.simple and excellent structure
3.wide application
Drying machine for food
Main applications
Hot air circulation oven is suitable for heating and dehumidifying of raw materials and products for pharmacy-eutical,chemical,foodstuff and light and heavy industries.
Main feature
Most of the hot winds are cycled within the box. It has high transmission efficiency, and can save energy. By making of the forced ventilation,the upper and lower temperature difference can be reduced. It is characterize-ed by Iow noise,stable operation,automatic temperature-control and convenient maintenance. This is according with the requirements of GMP.
Working principle
The steam or electricity is used as the heat source. The axial fan is used for heating the air of the heat exchanger in node of convective heat exchanging. The hot air stream transfers the heat to the material through the drying tray. The fresh air enters the drying box through air inlet hole for making-up. The humid air is exhausted from the dehumidifying hole. In this way, the machine keeps the proper relative humidity in the drying box.
Main technical parameters
Item No
Capacity (kg/h)
Power of fan (kw)
Steam consumption (kg/h)
Radiator area
Volume of wind (m³/h)
Amount of oven
Amount of baker
Meas. (mm)
Weight (kg)
CT-C-O
50
0.45
10
10
3450
24
1
1430×1350×2300
400
CT-C-I
100
0.45
20
20
3450
48
2
2430×1350×2300
620
CT-C-II
200
0.9
40
40
6900
96
4
2430×2350×2300
1130
CT-C-III
300
1.35
70
80
10350
144
6
3300×2350×2300
1560
CT-C-IV
400
1.8
90
100
13800
192
8
4300×2350×2300
2120
Drying machine of reverse turning bed type
Drying machine of reverse turning bed type
1.thermal efficiency is high
2.simple and excellent structure
3.wide application
drying machine of reverse turning bed type
Main applications
Hot air circulation oven is suitable for heating and dehumidifying of raw materials and products for pharmacy-eutical,chemical,foodstuff and light and heavy industries.
Main features
Most of the hot winds are cycled within the box. It has high transmission efficiency, and can save energy. By making of the forced ventilation,the upper and lower temperature difference can be reduced. It is characterize-ed by Iow noise,stable operation,automatic temperature-control and convenient maintenance. This is according with the requirements of GMP.
Working principle
The steam or electricity is used as the heat source. The axial fan is used for heating the air of the heat exchanger in node of convective heat exchanging. The hot air stream transfers the heat to the material through the drying tray. The fresh air enters the drying box through air inlet hole for making-up. The humid air is exhausted from the dehumidifying hole. In this way, the machine keeps the proper relative humidity in the drying box.
Main technical parameters
Item No
Capacity (kg/h)
Power of fan (kw)
Steam consumption (kg/h)
Radiator area
Volume of wind (m³/h)
Amount of oven
Amount of baker
Meas. (mm)
Weight (kg)
CT-C-O
50
0.45
10
10
3450
24
1
1430×1350×2300
400
CT-C-I
100
0.45
20
20
3450
48
2
2430×1350×2300
620
CT-C-II
200
0.9
40
40
6900
96
4
2430×2350×2300
1130
CT-C-III
300
1.35
70
80
10350
144
6
3300×2350×2300
1560
CT-C-IV
400
1.8
90
100
13800
192
8
4300×2350×2300
2120
1.thermal efficiency is high
2.simple and excellent structure
3.wide application
drying machine of reverse turning bed type
Main applications
Hot air circulation oven is suitable for heating and dehumidifying of raw materials and products for pharmacy-eutical,chemical,foodstuff and light and heavy industries.
Main features
Most of the hot winds are cycled within the box. It has high transmission efficiency, and can save energy. By making of the forced ventilation,the upper and lower temperature difference can be reduced. It is characterize-ed by Iow noise,stable operation,automatic temperature-control and convenient maintenance. This is according with the requirements of GMP.
Working principle
The steam or electricity is used as the heat source. The axial fan is used for heating the air of the heat exchanger in node of convective heat exchanging. The hot air stream transfers the heat to the material through the drying tray. The fresh air enters the drying box through air inlet hole for making-up. The humid air is exhausted from the dehumidifying hole. In this way, the machine keeps the proper relative humidity in the drying box.
Main technical parameters
Item No
Capacity (kg/h)
Power of fan (kw)
Steam consumption (kg/h)
Radiator area
Volume of wind (m³/h)
Amount of oven
Amount of baker
Meas. (mm)
Weight (kg)
CT-C-O
50
0.45
10
10
3450
24
1
1430×1350×2300
400
CT-C-I
100
0.45
20
20
3450
48
2
2430×1350×2300
620
CT-C-II
200
0.9
40
40
6900
96
4
2430×2350×2300
1130
CT-C-III
300
1.35
70
80
10350
144
6
3300×2350×2300
1560
CT-C-IV
400
1.8
90
100
13800
192
8
4300×2350×2300
2120
Drying machine of steam heating
Drying machine of steam heating
1.thermal efficiency is high
2.simple and excellent structure
3.wide application
Drying machine of steam heating
Main applications
Hot air circulation oven is suitable for heating and dehumidifying of raw materials and products for pharmacy-eutical,chemical,foodstuff and light and heavy industries.
Main features
Most of the hot winds are cycled within the box. It has high transmission efficiency, and can save energy. By making of the forced ventilation,the upper and lower temperature difference can be reduced. It is characterize-ed by Iow noise,stable operation,automatic temperature-control and convenient maintenance. This is according with the requirements of GMP.
Working principle
The steam or electricity is used as the heat source. The axial fan is used for heating the air of the heat exchanger in node of convective heat exchanging. The hot air stream transfers the heat to the material through the drying tray. The fresh air enters the drying box through air inlet hole for making-up. The humid air is exhausted from the dehumidifying hole. In this way, the machine keeps the proper relative humidity in the drying box.
Main technical parameters
Item No
Capacity (kg/h)
Power of fan (kw)
Steam consumption (kg/h)
Radiator area
Volume of wind (m³/h)
Amount of oven
Amount of baker
Meas. (mm)
Weight (kg)
CT-C-O
50
0.45
10
10
3450
24
1
1430×1350×2300
400
CT-C-I
100
0.45
20
20
3450
48
2
2430×1350×2300
620
CT-C-II
200
0.9
40
40
6900
96
4
2430×2350×2300
1130
CT-C-III
300
1.35
70
80
10350
144
6
3300×2350×2300
1560
CT-C-IV
400
1.8
90
100
13800
192
8
4300×2350×2300
2120
1.thermal efficiency is high
2.simple and excellent structure
3.wide application
Drying machine of steam heating
Main applications
Hot air circulation oven is suitable for heating and dehumidifying of raw materials and products for pharmacy-eutical,chemical,foodstuff and light and heavy industries.
Main features
Most of the hot winds are cycled within the box. It has high transmission efficiency, and can save energy. By making of the forced ventilation,the upper and lower temperature difference can be reduced. It is characterize-ed by Iow noise,stable operation,automatic temperature-control and convenient maintenance. This is according with the requirements of GMP.
Working principle
The steam or electricity is used as the heat source. The axial fan is used for heating the air of the heat exchanger in node of convective heat exchanging. The hot air stream transfers the heat to the material through the drying tray. The fresh air enters the drying box through air inlet hole for making-up. The humid air is exhausted from the dehumidifying hole. In this way, the machine keeps the proper relative humidity in the drying box.
Main technical parameters
Item No
Capacity (kg/h)
Power of fan (kw)
Steam consumption (kg/h)
Radiator area
Volume of wind (m³/h)
Amount of oven
Amount of baker
Meas. (mm)
Weight (kg)
CT-C-O
50
0.45
10
10
3450
24
1
1430×1350×2300
400
CT-C-I
100
0.45
20
20
3450
48
2
2430×1350×2300
620
CT-C-II
200
0.9
40
40
6900
96
4
2430×2350×2300
1130
CT-C-III
300
1.35
70
80
10350
144
6
3300×2350×2300
1560
CT-C-IV
400
1.8
90
100
13800
192
8
4300×2350×2300
2120
Drying machine with single stove
Drying machine with single stove:1,high dry capacity 2,smooth rotation 3,low energy consumption 4,easy operation 5 high output.
drying machine
Introduction
Drying machine with single stove is suitable for drying materials like sawdust ,rice hull ,milling wheat straw ,corn stalks and so on .The moisture of wet materials is at 20--60%.This wood dryer reduces the moisture to 8--12% with the advantages of lower cost consumption and high efficiency .
The machine is mainly made up of
hot-air stove
(1 or 2 stoves),
buffer
,
blower
,the
pipes
and
cyclone separator
.
Working principle
: In the dryer, high-speed hot air stream sustain raw material in the suspending state, then the material is dried. Since air stream speed is very high, and materials suspending in air stream, the heat transfer surface between air and raw material is large, so the heat transfer rate is high.
It is special suitable for drying heat sensitive material like
sawdust
,
rice hull
,
milled wheat straw
,
milled cotton
/
corn stalks
and so on. It also can be used for drying the
grain
better.
The HGJ SERIES dryer has the feature of low cost and high efficiency. It can reduce moisture from
40-45%
to
8-12%
.
Specification
Model
Power (kw)
Capacity (kg/h)
Net/Gross Weight (kg)
Raw materials Diameter(mm)
Packing Dimension(m³)
HGJ-I
4
300-400
1000/1100
<1mm & < 5mm
6.36
HGJ-II
7.5+0.75+0.75
500-600
2040/2260
<1mm & < 5mm
12.41
HGJ-III
11+0.75+075+5
700-800
2850/3080
<1mm & < 5mm
13.59
HGJ-IV
15+0.75+0.75
1000-1200
2850/3080
<1mm & < 5mm
13.59
drying machine
Introduction
Drying machine with single stove is suitable for drying materials like sawdust ,rice hull ,milling wheat straw ,corn stalks and so on .The moisture of wet materials is at 20--60%.This wood dryer reduces the moisture to 8--12% with the advantages of lower cost consumption and high efficiency .
The machine is mainly made up of
hot-air stove
(1 or 2 stoves),
buffer
,
blower
,the
pipes
and
cyclone separator
.
Working principle
: In the dryer, high-speed hot air stream sustain raw material in the suspending state, then the material is dried. Since air stream speed is very high, and materials suspending in air stream, the heat transfer surface between air and raw material is large, so the heat transfer rate is high.
It is special suitable for drying heat sensitive material like
sawdust
,
rice hull
,
milled wheat straw
,
milled cotton
/
corn stalks
and so on. It also can be used for drying the
grain
better.
The HGJ SERIES dryer has the feature of low cost and high efficiency. It can reduce moisture from
40-45%
to
8-12%
.
Specification
Model
Power (kw)
Capacity (kg/h)
Net/Gross Weight (kg)
Raw materials Diameter(mm)
Packing Dimension(m³)
HGJ-I
4
300-400
1000/1100
<1mm & < 5mm
6.36
HGJ-II
7.5+0.75+0.75
500-600
2040/2260
<1mm & < 5mm
12.41
HGJ-III
11+0.75+075+5
700-800
2850/3080
<1mm & < 5mm
13.59
HGJ-IV
15+0.75+0.75
1000-1200
2850/3080
<1mm & < 5mm
13.59
Drying machine--0086 13903817193
drying machine:
suitable for drying all types of agricultural products
High capacity and quality
low price and energy
drying machine
Dryer using hot air drying system, power of small, low power consumption, fast-drying, drying of water production in accordance with the size of the raw materials, power 4km.
Technical parameters
:
Dry Capacity
200kg/h
Grain size of product
diameter< 3mm Diameter
length< 5mm Length
Motor power
4KW
Temperature of the hot air
180~250
Concact Information
Name: Ting Song
Cell: 86 13903817193
Tel: 86 371 65903478
suitable for drying all types of agricultural products
High capacity and quality
low price and energy
drying machine
Dryer using hot air drying system, power of small, low power consumption, fast-drying, drying of water production in accordance with the size of the raw materials, power 4km.
Technical parameters
:
Dry Capacity
200kg/h
Grain size of product
diameter< 3mm Diameter
length< 5mm Length
Motor power
4KW
Temperature of the hot air
180~250
Concact Information
Name: Ting Song
Cell: 86 13903817193
Tel: 86 371 65903478
Drying machine/Drying equipment/SINON dryer
1.Rotary dryer equipment
2.Continuous operation
3.Simple structure
4.Low maintenance costs
5.Applicable to a wide range
Revolution of tube drying machinery applise to buiding material,metallurgy,chemical industry,cement industrymaterial such as mineral waste residue,clay broadly,Throw up and scatter commponent made up of such as expecting that board,drive are equpped with,propping up the device and the sealing washer mainly from the solid of revolution. Have strcture reasonableness,is of excellent workmanship,output is high,energy consumption is low ,move round to wait for merit conveniently.
Technical parameter list
Product specifications
Capacity
Motor
Reducer
SizeLength × width × height
(mm)
Weight (T)
Volume(M
3
Speed (r/min)
Gradient%
Model
Power (Kw )
Model
Φ1×10M
7.85
6.73
3-5
Y132M2-6
5.5
ZL350--25
10000×1876×2069
7.5
Φ1.2×6M
6.8
5.8
3-5
Y132M2-6
5.5
ZL359--25
6000×2159×2475
7.97
Φ1.2×8M
9.1
5.8
3-5
Y132M2-6
5.5
ZL350--25
8000×2159×2475
8.75
Φ1.2×10M
11.31
5.8
3-5
Y160M-6
7.5
ZL350--25
10000×2159×2475
9.52
Φ1.2×12M
13.31
5.8
3-5
Y160L-6
11
ZQ500--31.5
12000×2159×2475
13.1
Φ1.5×8M
14.14
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
8000×2655×2895
15.74
Φ1.5×10M
17.67
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
10000×2655×2895
17.93
Φ1.5×12M
21.2
4.8
3-5
180L-6
15
ZQ650--31.5
12000×2655×2895
22.3
Φ1.5×14M
24.9
4.8
3-5
180L-6
15
ZQ650--31.5
14000×2655×2895
25.1
2.Continuous operation
3.Simple structure
4.Low maintenance costs
5.Applicable to a wide range
Revolution of tube drying machinery applise to buiding material,metallurgy,chemical industry,cement industrymaterial such as mineral waste residue,clay broadly,Throw up and scatter commponent made up of such as expecting that board,drive are equpped with,propping up the device and the sealing washer mainly from the solid of revolution. Have strcture reasonableness,is of excellent workmanship,output is high,energy consumption is low ,move round to wait for merit conveniently.
Technical parameter list
Product specifications
Capacity
Motor
Reducer
SizeLength × width × height
(mm)
Weight (T)
Volume(M
3
Speed (r/min)
Gradient%
Model
Power (Kw )
Model
Φ1×10M
7.85
6.73
3-5
Y132M2-6
5.5
ZL350--25
10000×1876×2069
7.5
Φ1.2×6M
6.8
5.8
3-5
Y132M2-6
5.5
ZL359--25
6000×2159×2475
7.97
Φ1.2×8M
9.1
5.8
3-5
Y132M2-6
5.5
ZL350--25
8000×2159×2475
8.75
Φ1.2×10M
11.31
5.8
3-5
Y160M-6
7.5
ZL350--25
10000×2159×2475
9.52
Φ1.2×12M
13.31
5.8
3-5
Y160L-6
11
ZQ500--31.5
12000×2159×2475
13.1
Φ1.5×8M
14.14
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
8000×2655×2895
15.74
Φ1.5×10M
17.67
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
10000×2655×2895
17.93
Φ1.5×12M
21.2
4.8
3-5
180L-6
15
ZQ650--31.5
12000×2655×2895
22.3
Φ1.5×14M
24.9
4.8
3-5
180L-6
15
ZQ650--31.5
14000×2655×2895
25.1
Tuesday, September 27, 2011
Drying machine/Rotary Dryer
Rotary Dryer
1)Superior quality
2)Top-ranking materials
3)Consummate design
The dryer is a type of industrial dryer employed to reduce or minimize the liquid moisture content of the material it is handling by bringing it into direct contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.
Model
Specifications
Speed
(r/m)
Power
(kw)
Weight
(T)
Diameter (m)
Length
(m)
Gradient
(%)
Φ1×12M
1.0
12
5
6.2
7.5
13.2
Φ1.2×12M
1.2
12
5
5.99
11
15.7
Φ1.2×14M
1.2
14
5
3.99
11
17.3
Φ1.5×12M
1.5
12
5
4.02
15
17.4
Φ1.8×14M
1.8
14
5
4.59
18.5
27.2
Φ1.8×16M
1.8
16
5
5.48
22
39.6
Φ2.0×14M
2.0
14
5
4.59
18.5
31.6
Φ2.0×16M
2.0
16
5
4.59
30
43.9
Φ2.2×14M
2.2
14
5
4.59
22
37.4
Φ2.2×27M
2.2
27
5
4.58
37
79.2
Φ2.4×14M
2.4
14
5
3.6
30
46.2
Φ2.4×18M
2.4
18
5
3.12
37
66.7
Φ2.8×18M
2.8
18
5
3.12
45
89.3
Φ3.0×20M
3.0
20
5
3.67
55
95.5
Φ3.2×22M
3.2
22
5
3.4
75
141.6
Φ3.6×25M
3.6
25
5
3.1
110
188.6
SINON Machinery Manufacturing Co,.Ltd
Address:North of Yong'an Road,Gongyi city,Henan Province,China
Tel +8637169537555
+8637164373688
Fax +8637164373899
1)Superior quality
2)Top-ranking materials
3)Consummate design
The dryer is a type of industrial dryer employed to reduce or minimize the liquid moisture content of the material it is handling by bringing it into direct contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.
Model
Specifications
Speed
(r/m)
Power
(kw)
Weight
(T)
Diameter (m)
Length
(m)
Gradient
(%)
Φ1×12M
1.0
12
5
6.2
7.5
13.2
Φ1.2×12M
1.2
12
5
5.99
11
15.7
Φ1.2×14M
1.2
14
5
3.99
11
17.3
Φ1.5×12M
1.5
12
5
4.02
15
17.4
Φ1.8×14M
1.8
14
5
4.59
18.5
27.2
Φ1.8×16M
1.8
16
5
5.48
22
39.6
Φ2.0×14M
2.0
14
5
4.59
18.5
31.6
Φ2.0×16M
2.0
16
5
4.59
30
43.9
Φ2.2×14M
2.2
14
5
4.59
22
37.4
Φ2.2×27M
2.2
27
5
4.58
37
79.2
Φ2.4×14M
2.4
14
5
3.6
30
46.2
Φ2.4×18M
2.4
18
5
3.12
37
66.7
Φ2.8×18M
2.8
18
5
3.12
45
89.3
Φ3.0×20M
3.0
20
5
3.67
55
95.5
Φ3.2×22M
3.2
22
5
3.4
75
141.6
Φ3.6×25M
3.6
25
5
3.1
110
188.6
SINON Machinery Manufacturing Co,.Ltd
Address:North of Yong'an Road,Gongyi city,Henan Province,China
Tel +8637169537555
+8637164373688
Fax +8637164373899
Drying machine/ore equipment/SINON dryer
1.Rotary dryer equipment
2.Continuous operation
3.Simple structure
4.Low maintenance costs
5.Applicable to a wide range
Revolution of tube drying machinery applise to buiding material,metallurgy,chemical industry,cement industrymaterial such as mineral waste residue,clay broadly,Throw up and scatter commponent made up of such as expecting that board,drive are equpped with,propping up the device and the sealing washer mainly from the solid of revolution. Have strcture reasonableness,is of excellent workmanship,output is high,energy consumption is low ,move round to wait for merit conveniently.
Technical parameter list
Product specifications
Capacity
Motor
Reducer
SizeLength × width × height
(mm)
Weight (T)
Volume(M
3
Speed (r/min)
Gradient%
Model
Power (Kw )
Model
Φ1×10M
7.85
6.73
3-5
Y132M2-6
5.5
ZL350--25
10000×1876×2069
7.5
Φ1.2×6M
6.8
5.8
3-5
Y132M2-6
5.5
ZL359--25
6000×2159×2475
7.97
Φ1.2×8M
9.1
5.8
3-5
Y132M2-6
5.5
ZL350--25
8000×2159×2475
8.75
Φ1.2×10M
11.31
5.8
3-5
Y160M-6
7.5
ZL350--25
10000×2159×2475
9.52
Φ1.2×12M
13.31
5.8
3-5
Y160L-6
11
ZQ500--31.5
12000×2159×2475
13.1
Φ1.5×8M
14.14
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
8000×2655×2895
15.74
Φ1.5×10M
17.67
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
10000×2655×2895
17.93
Φ1.5×12M
21.2
4.8
3-5
180L-6
15
ZQ650--31.5
12000×2655×2895
22.3
Φ1.5×14M
24.9
4.8
3-5
180L-6
15
ZQ650--31.5
14000×2655×2895
25.1
2.Continuous operation
3.Simple structure
4.Low maintenance costs
5.Applicable to a wide range
Revolution of tube drying machinery applise to buiding material,metallurgy,chemical industry,cement industrymaterial such as mineral waste residue,clay broadly,Throw up and scatter commponent made up of such as expecting that board,drive are equpped with,propping up the device and the sealing washer mainly from the solid of revolution. Have strcture reasonableness,is of excellent workmanship,output is high,energy consumption is low ,move round to wait for merit conveniently.
Technical parameter list
Product specifications
Capacity
Motor
Reducer
SizeLength × width × height
(mm)
Weight (T)
Volume(M
3
Speed (r/min)
Gradient%
Model
Power (Kw )
Model
Φ1×10M
7.85
6.73
3-5
Y132M2-6
5.5
ZL350--25
10000×1876×2069
7.5
Φ1.2×6M
6.8
5.8
3-5
Y132M2-6
5.5
ZL359--25
6000×2159×2475
7.97
Φ1.2×8M
9.1
5.8
3-5
Y132M2-6
5.5
ZL350--25
8000×2159×2475
8.75
Φ1.2×10M
11.31
5.8
3-5
Y160M-6
7.5
ZL350--25
10000×2159×2475
9.52
Φ1.2×12M
13.31
5.8
3-5
Y160L-6
11
ZQ500--31.5
12000×2159×2475
13.1
Φ1.5×8M
14.14
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
8000×2655×2895
15.74
Φ1.5×10M
17.67
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
10000×2655×2895
17.93
Φ1.5×12M
21.2
4.8
3-5
180L-6
15
ZQ650--31.5
12000×2655×2895
22.3
Φ1.5×14M
24.9
4.8
3-5
180L-6
15
ZQ650--31.5
14000×2655×2895
25.1
Drying machine
Usage:Dry Various textile, linter/chemical fiber clothing & latex after above iterms dehydrated.Widely used by textile etc
Usage:
Dry Various textile, linter/chemical fiber clothing & latex products after above iterms dehydrated.Widely used by textile, clothes, hotel, hospital,army etc companies.
Advantage
: high efficiency,save energy,low noise,safty etc.
Structure brief introduction
1- The machine is made of high grade stainless steel.Be able to bear corrosion. Do not lose fabric when workig
2- Big door,so be convinient to through in or take out clothes etc.There is glass window on the door.People could watch the dry condition of clothes etc.
3- The electricity charges system of the machine could control the machine the positive and negative rotation.According to demands of defferent material dried,users could adjust the drying time.The whole drying process is automatic.
4-The machine is assembled Timing under the control of device.According to the demands of washing, tune up the time.The machine shall stop working at the arming time automatically.
5- The machine is small valume.It could be used at variety place.
Usage:
Dry Various textile, linter/chemical fiber clothing & latex products after above iterms dehydrated.Widely used by textile, clothes, hotel, hospital,army etc companies.
Advantage
: high efficiency,save energy,low noise,safty etc.
Structure brief introduction
1- The machine is made of high grade stainless steel.Be able to bear corrosion. Do not lose fabric when workig
2- Big door,so be convinient to through in or take out clothes etc.There is glass window on the door.People could watch the dry condition of clothes etc.
3- The electricity charges system of the machine could control the machine the positive and negative rotation.According to demands of defferent material dried,users could adjust the drying time.The whole drying process is automatic.
4-The machine is assembled Timing under the control of device.According to the demands of washing, tune up the time.The machine shall stop working at the arming time automatically.
5- The machine is small valume.It could be used at variety place.
2011 China New rotary drum dryer with good quality
rotary drum dryer
1.Supply the whole production line layout
2.Italy technology but Chinese price
3.3 years'after-sale
rotary drum dryer
Gongyi Wangda Machinery Factory
, located in the west of Zhengzhou City, which has two parts, old factory is in urban nearby train station and new factory is in Zhitian Industrial Park of Gongyi.
With unique geographical condition, Wangda Machinery concentrates capital, technology, personnel, information and market as advantages, and forms to a strong company entity with more than 30,000 square meters area, 25,000 square meters standard plant and 50 million fixed assets.
Wangda Machinery always firmly follows the tenets of “reputation, best service, leading technology, quality assurance” and adheres to “people-oriented, science and technology”. We’re constantly improving product quality, manufacturing capacity. Produced on the basis of features of home and abroad manufacturers, our aerated concrete equipments operate steadily, and have been widely used in China and exported to Southeast, Asia, Africa, the Middle East and other countries.
For the sake of users’ approbation, support and expectation, Wangda Machinery will provide machines with more advanced and better quality as well as timely and quality service.
Main Use:
Rotary dryer
is mainly for dealing with material in large quantities. As reliable operation, operating flexibility, adaptability and large capacity, this dryer is widely used in metallurgy, building materials, food, light industry, chemical industry, coal, medicine and mining industries.
This generally adapted to granular powder materials. Through the way of mixing material partially, this dryer also can be used for drying sticky paste-like materials or materials with high water content.
Structure:
Rotary dryer
consists of drum shell, front and rear roller ring, gears, block roll, pinion, discharging part, reducer, motor, warm air duct, feed-in chute, furnace body and other components. Besides, we can design gas producer, combustor chamber or supporting elevator, belt conveyor, quantitative feeder, dust collector cyclone, induced draft fan, etc.
Technical Parameter:
Type
Inclination (%)
Rotation Speed(r/min)
Inlet Temperature
(°C)
Power(kw)
Capacity(t/h)
Weight(t)
Φ600×6000
3-5
3-8
≤700
3
0.5-1.5
2.9
Φ800×8000
3-5
3-8
≤700
4
0.8-2.0
3.5
Φ800×10000
3-5
3-8
≤700
4
0.8-2.5
4.5
Φ1000×10000
3-5
3-8
≤700
5.5
1.0-3.5
5.6
Φ1200×10000
3-5
3-8
≤700
7.5
1.8-5
14.5
Φ1200×12000
3-5
3-8
≤700
11
2-6
14.8
Φ1500×14000
3-5
2-6
≤800
15
3.5-9
17.8
Φ1800×14000
3-5
2-6
≤800
18
5-12
22
Φ2200×16000
3-5
1.5-6
≤800
30
12-25
36
Φ2400×18000
3-5
1.5-5
≤800
37
18-30
52
Φ3000×20000
3-5
1.5-5
≤800
55
25-35
80
Φ3000×25000
3-5
1.5-5
≤800
75
32-40
86
Remarks:
(The above capacity is on the basis of 18% moisture content of limestone.
Showcase:
1.Supply the whole production line layout
2.Italy technology but Chinese price
3.3 years'after-sale
rotary drum dryer
Gongyi Wangda Machinery Factory
, located in the west of Zhengzhou City, which has two parts, old factory is in urban nearby train station and new factory is in Zhitian Industrial Park of Gongyi.
With unique geographical condition, Wangda Machinery concentrates capital, technology, personnel, information and market as advantages, and forms to a strong company entity with more than 30,000 square meters area, 25,000 square meters standard plant and 50 million fixed assets.
Wangda Machinery always firmly follows the tenets of “reputation, best service, leading technology, quality assurance” and adheres to “people-oriented, science and technology”. We’re constantly improving product quality, manufacturing capacity. Produced on the basis of features of home and abroad manufacturers, our aerated concrete equipments operate steadily, and have been widely used in China and exported to Southeast, Asia, Africa, the Middle East and other countries.
For the sake of users’ approbation, support and expectation, Wangda Machinery will provide machines with more advanced and better quality as well as timely and quality service.
Main Use:
Rotary dryer
is mainly for dealing with material in large quantities. As reliable operation, operating flexibility, adaptability and large capacity, this dryer is widely used in metallurgy, building materials, food, light industry, chemical industry, coal, medicine and mining industries.
This generally adapted to granular powder materials. Through the way of mixing material partially, this dryer also can be used for drying sticky paste-like materials or materials with high water content.
Structure:
Rotary dryer
consists of drum shell, front and rear roller ring, gears, block roll, pinion, discharging part, reducer, motor, warm air duct, feed-in chute, furnace body and other components. Besides, we can design gas producer, combustor chamber or supporting elevator, belt conveyor, quantitative feeder, dust collector cyclone, induced draft fan, etc.
Technical Parameter:
Type
Inclination (%)
Rotation Speed(r/min)
Inlet Temperature
(°C)
Power(kw)
Capacity(t/h)
Weight(t)
Φ600×6000
3-5
3-8
≤700
3
0.5-1.5
2.9
Φ800×8000
3-5
3-8
≤700
4
0.8-2.0
3.5
Φ800×10000
3-5
3-8
≤700
4
0.8-2.5
4.5
Φ1000×10000
3-5
3-8
≤700
5.5
1.0-3.5
5.6
Φ1200×10000
3-5
3-8
≤700
7.5
1.8-5
14.5
Φ1200×12000
3-5
3-8
≤700
11
2-6
14.8
Φ1500×14000
3-5
2-6
≤800
15
3.5-9
17.8
Φ1800×14000
3-5
2-6
≤800
18
5-12
22
Φ2200×16000
3-5
1.5-6
≤800
30
12-25
36
Φ2400×18000
3-5
1.5-5
≤800
37
18-30
52
Φ3000×20000
3-5
1.5-5
≤800
55
25-35
80
Φ3000×25000
3-5
1.5-5
≤800
75
32-40
86
Remarks:
(The above capacity is on the basis of 18% moisture content of limestone.
Showcase:
Drying machine
EASY USE WITH GOOD QUALITY.We can meey your demandes at the best quality and favourable machine.
If the marterial’s moisture is above 12%,the drying machine is needed to dry the moisture from 12% to 6%-8% before the material ( e.g.sawdust ) is put into Briquette extruder machine.The productivity can be designed as the requirements from customers.
Model No.
JXII-1
JXII-2
JXII-3
productivity(Kg/hour)
350-500kg
900-1200kg
1300-2100kg
The diameter of the materials
< 3mm & < 5mm
< 3mm & < 5mm
< 3mm & < 5mm
The temperature of the heating air
180°C
~250°C
180°C
~250°C
180°C
~250°C
Motor power
4kw
5.5kw
7.5kw
weight
1200kg
1600kg
2100
Size of the machine
10*1.0*2.0m
15*1.0*2.0m
21*1.2*2.5m
If the marterial’s moisture is above 12%,the drying machine is needed to dry the moisture from 12% to 6%-8% before the material ( e.g.sawdust ) is put into Briquette extruder machine.The productivity can be designed as the requirements from customers.
Model No.
JXII-1
JXII-2
JXII-3
productivity(Kg/hour)
350-500kg
900-1200kg
1300-2100kg
The diameter of the materials
< 3mm & < 5mm
< 3mm & < 5mm
< 3mm & < 5mm
The temperature of the heating air
180°C
~250°C
180°C
~250°C
180°C
~250°C
Motor power
4kw
5.5kw
7.5kw
weight
1200kg
1600kg
2100
Size of the machine
10*1.0*2.0m
15*1.0*2.0m
21*1.2*2.5m
Drying machine
TL-HD series
hopper dryer
chooses hot wind circulated drying method,
and can widely be used in drying PP, PE, PS, ABS
TL-HD series hopper dryer chooses hot wind circulated drying method, and can widely be used in drying PP, PE, PS, ABS and other material etc.
Model
Volume(L)
Loading volume(kg)
Power(kw)
Weight (kg)
Corresponding mainframe spec(g)
Heater
Fan motor
STG-U40
40
25
2.6
0.06
50
125250
STG-U80
80
50
3.9
0.12
60
250500
STG-U125
125
75
4.8
0.12
75
5001000
STG-U160
160
100
5.4
0.25
90
10002000
STG-U250
250
150
9
0.37
110
20003000
STG-U315
315
200
12
0.37
135
30004000
STG-U400
400
250
15
0.55
200
30006300
STG-U500
500
300
18
0.55
240
400010000
STG-U800
800
500
24
0.75
300
630012500
STG-U1250
1250
800
36
1.1
500
1250015000
STG-U1600
1600
1000
40
1.1
600
1250015000
STG-U2000
2000
1200
48
1.5
750
1250015000
STG-U3200
3200
2000
60
2.2
900
1250015000
hopper dryer
chooses hot wind circulated drying method,
and can widely be used in drying PP, PE, PS, ABS
TL-HD series hopper dryer chooses hot wind circulated drying method, and can widely be used in drying PP, PE, PS, ABS and other material etc.
Model
Volume(L)
Loading volume(kg)
Power(kw)
Weight (kg)
Corresponding mainframe spec(g)
Heater
Fan motor
STG-U40
40
25
2.6
0.06
50
125250
STG-U80
80
50
3.9
0.12
60
250500
STG-U125
125
75
4.8
0.12
75
5001000
STG-U160
160
100
5.4
0.25
90
10002000
STG-U250
250
150
9
0.37
110
20003000
STG-U315
315
200
12
0.37
135
30004000
STG-U400
400
250
15
0.55
200
30006300
STG-U500
500
300
18
0.55
240
400010000
STG-U800
800
500
24
0.75
300
630012500
STG-U1250
1250
800
36
1.1
500
1250015000
STG-U1600
1600
1000
40
1.1
600
1250015000
STG-U2000
2000
1200
48
1.5
750
1250015000
STG-U3200
3200
2000
60
2.2
900
1250015000
Drying machine
Drying machine
Rated Frequency: 50Hz
Rated Drying Capacity: 7.0kg
Rated Input Power: 200W
Package Dimension: 425*420*735(mm)
Drying Machine
Rated Frequency: 50Hz
Rated Drying Capacity: 7.0kg
Rated Input Power: 200W
Package Dimension: 425*420*735(mm)
Gross Weight: 10kg
Net Weight:9kg
Quantity(40'HQ):500PCS
Rated Frequency: 50Hz
Rated Drying Capacity: 7.0kg
Rated Input Power: 200W
Package Dimension: 425*420*735(mm)
Drying Machine
Rated Frequency: 50Hz
Rated Drying Capacity: 7.0kg
Rated Input Power: 200W
Package Dimension: 425*420*735(mm)
Gross Weight: 10kg
Net Weight:9kg
Quantity(40'HQ):500PCS
Drying machine
Drying machine
Rated Voltage: 220V
Rated Frequency: 50Hz
Rated Drying Capacity: 5.2kg
Drying machine
Rated Voltage: 220V
Rated Frequency: 50Hz
Rated Drying Capacity: 5.2kg
Rated Input Power: 200W
Package Dimension: 430*435*785(mm)
Gross Weight: 11kg
Net Weight:10kg
Quantity(40'HQ):405PCS
Rated Voltage: 220V
Rated Frequency: 50Hz
Rated Drying Capacity: 5.2kg
Drying machine
Rated Voltage: 220V
Rated Frequency: 50Hz
Rated Drying Capacity: 5.2kg
Rated Input Power: 200W
Package Dimension: 430*435*785(mm)
Gross Weight: 11kg
Net Weight:10kg
Quantity(40'HQ):405PCS
Drying machine
Drying machine
Rated Frequency: 50Hz
Rated Drying Capacity: 5.2kg
Rated Input Power: 200W
Package Dimension: 425*420*735(mm)
Drying Machine
Rated Frequency: 50Hz
Rated Drying Capacity: 5.2kg
Rated Input Power: 200W
Package Dimension: 425*420*735(mm)
Gross Weight: 10kg
Net Weight:9kg
Quantity(40'HQ):500PCS
Rated Frequency: 50Hz
Rated Drying Capacity: 5.2kg
Rated Input Power: 200W
Package Dimension: 425*420*735(mm)
Drying Machine
Rated Frequency: 50Hz
Rated Drying Capacity: 5.2kg
Rated Input Power: 200W
Package Dimension: 425*420*735(mm)
Gross Weight: 10kg
Net Weight:9kg
Quantity(40'HQ):500PCS
Drying machine
Drying machine
Rated Frequency: 50Hz
Rated Drying Capacity: 5.2kg
Rated Input Power: 200W
Package Dimension: 425*420*735(mm)
Drying Machine
Rated Frequency: 50Hz
Rated Drying Capacity: 5.2kg
Rated Input Power: 200W
Package Dimension: 425*420*735(mm)
Gross Weight: 10kg
Net Weight:9kg
Quantity(40'HQ):500PCS
Rated Frequency: 50Hz
Rated Drying Capacity: 5.2kg
Rated Input Power: 200W
Package Dimension: 425*420*735(mm)
Drying Machine
Rated Frequency: 50Hz
Rated Drying Capacity: 5.2kg
Rated Input Power: 200W
Package Dimension: 425*420*735(mm)
Gross Weight: 10kg
Net Weight:9kg
Quantity(40'HQ):500PCS
Subscribe to:
Posts (Atom)