Sawdust rotary dryer

1.low investment Sawdust dryer
2.High Cost Performance
3.Wide scope of use
4.more professional
5.fine afterservic
Introduction of
Sawdust rotary dryer
:

For raw materials with heavy humidity which is above 12%, you need to install a dryer before further processing. This Air Current Type dryer can reduce the humidity of wood materials below 12% per time. The Cost of this Air Current dryer is much lower than Rotary dryer. It is professionally designed for drying different kinds of wood sawdust. It has advantages of low cost, low consumption, high capacity, easy operation and maintenance, etc. In addition, the round places of pipes can be changed to any angle which can save space and solve plant dimension limitation.

Sawdust rotary dryer
Mechanical structure and working principle:

Regarding TDS-I and TDS-II Type dryer (With one stove),it is suitable to process materials which moisture content between 20%-25%, can reduce the MS to 8%-12% one drying time. Regarding TDS-III (With two stoves),it is suitable to process materials which moisture content between 35%-50%.It can reduce the humidity to 8%-12% one drying time. That means it can reduce approx.30% for one drying time. But if the humidity of materials is lower than 35%, the capacity will be increased with less of fuel.

Sawdust rotary dryer
Technical Specification:

Model
TDS-I Type dryer with one stove
Capacity (Kg/hour)
200-300
Size of Input material (Diameter) mm
< 3 & < 5
Temperature of Hot Air
180°C~250°C
Power (Kw)
4
Gross/Net Weight (Kg)
1300/1200
Overall Dimension (L*W*H) m
10*1.0*2.0m
Packing Dimension (mm)
2440*1220*2150


Note: The capacity of above models can be achieved only after the material handled by the dewatered.