Sawdust drying plant

Sawdust Drying Plant:
1.with two stoves
2.high capacity,low consumption
3.with CE certificate
4.technical guidance freely
Sawdust Drying plant
This dryer is suitable for drying materials of moisture 30-60%. Wet material is input into the hopper. The dryer is equipped with two fuel boilers, inlet, steel pipe, exhaust blower (fan), air lock and cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are discharged from the outlet with air lock. This wood dryer can reduces the moisture to 8-12% one time with the advantages of
lower cost consumption and high efficiency.
Technical data:
Power (Centrifugal Fan+ Air Lock): 11 KW+0.75 KW+0.75KW
Net/Gross Weight: 2850/3080 KG
Raw materials diameter: <1mm & < 5mm
Capacity: 700-1000 KG/H
Temperature of Hot Air: 180-250°C




Model
Power (kw)
Capacity (kg/h)
Net/Gross Weight (kg)
Raw materials Diameter(mm)
Packing Dimension(m³)
HGJ-I
4
300-400
1000/1100
<1mm & < 5mm
6.36
HGJ-II
7.5+0.75+0.75
500-600
2040/2260
<1mm & < 5mm
12.41
HGJ-III
11+0.75+075+5
700-800
2850/3080
<1mm & < 5mm
13.59
HGJ-IV
15+0.75+0.75
1000-1200
2850/3080
<1mm & < 5mm
13.59