XSZ series Drying Processor

XSZ rotating flash rotating Drying Processor integrates drying, grinding and sieving are completed in one time.
Features
There are many kinds feeding equipment for choosing and feeding is continue and static.
There is a cooling device at the bottom of drier, where is high temperature area heat sensitivity raw material can not contact with heat surface directly, therefore it solves the metamorphose problem of heat sensitivity raw material.
There are pressured seal and bearing cooling device, so can make the life of machine longer.
There is special equipment for sharing wind, and raising the amount of hot air.
There are rotational flow pieces inside the drying chamber. It is used to control the moisture and granule of raw material to needed level.
The machine could add specific gravity of materials compare with other drying method.
Because gas speed at circle inside the drying chamber is high and the staying time of raw material is short, so it could prevent material stick to me wall and metamorphose problem, high efficiency and quick speed can be realized. It is possible for small equipment to carry out large-scale production.

Description
XSZ series high speed rotating Drying Processor is developed by our factory, and it’s technology is based on advanced technology abroad. The machine is including many superiority, such as reasonable design, compact structure widely utilization, great productive capacity, good quality, high efficiency and save energy. Drying, grinding and sieving are completed in one time. It eliminates pollution and the technology is reached international advance level.

Principle
Hot air enters into stirring and crushing and drying chamber from the bottom of drier with suitable spouting speed. It exerts strong shearing, blowing, floating and rotating effect. It strengthens the process of heat and mass transfer. At the bottom of drier, the large and damp granule is crushed under the action of stirrer and the granule that is small in particle and contain less moisture will lift accompanied with revolving air steam. During the period of lift, it is dried further. Because gas and solid two phase flow in rotating and the inertia of solid phase is more than that of gas and the relative velocity between solid and gas phase is large, so it strengthens the process of heat and mass transfer. Therefore the machine has large drying capacity.

Process Chart

Technical Parameters
model
Barrel diameter(mm)
Main machine dimensions(mm)
Main machine epower(kw)
Treatment wind(m
3
/h)
Water evaporation quantity(kg/h)
Floor space(m
2)
XSZ-2
200
250×2800
0.75-2.2
300-800
10-20
15
XSZ-3
300
400×3300
3-4
600-1500
20-50
21
XSZ-4
400
500×3500
4-7.5
1250-2500
40-70
27
XSZ-5
500
600×4000
5.5-11
1500-4000
60-100
33
XSZ-6
600
700×4200
7.5-18.5
2500-5000
80-150
39
XSZ-8
800
900×4600
11-18.5
4000-8000
100-250
40
XSZ-10
1000
1100×5000
15-30
7000-12500
150-420
55
XSZ-12
1200
1300×5200
15-37
10000-180000
200-600
62
XSZ-14
1400
1500×5400
30-55
14000-25000
300-800
89
XSZ-16
1600
1700×6000
45-75
18700-32000
450-1000
160