XSG flash dry/ing equipment/machine

XSG series high speed flash rotating dryer is developed by our factory, and its' techinology is based on advance techinology .
XSG series high speed flash rotating dryer/flash drying equipment/ flash drying machine/ flash dryer/flash drying machinery is developed by our factory, and its' techinology is based on advance techinology adorad. The machine is including many superioity, such as reasonable design, compact stuction,widly utilization,great productive capacity, good quality, high effect and save energy. Drying,grinding and sieve are completed in one euqipment in once time. It eliminate pollution and the techinology is reached international 80 advance level.
Principle of work:
Hot air enters into stirring and crushing and drying chamber from the bottom of drier with suitable atomizing speed. It exerts strong shearing, blowing, floating and rotating effect to raw material. Therefore raw material is granulated through centrifuge, shearing, impacting and friction effect. It strengthens the process of great exchange. At the bottom of drier, the large and damp granule is crushed under the action of stirrer and the granule that is small in particle and contain less moisture will lift accompanied with revolving air stream. During the period of lift, it is dried further. Because gas and solid two phase flow in rotating and the intertia of solid phase is more than that of gas and the relative velocity between solid and gas phase is large, so it strengthens the process of heat exchange. Therefore the machine has strong drying capacity.

Features:
1. Because the raw material particulate exists in high dispersing state caused by centrifuge, shearing, impacting and rubbing effect. Moreover the relative velocity between solid and gas phases is high so it strengthens the process of heat exchange. Therefore the machine has strong drying capacity;
2. Dry gas enters into the bottom of drier and produces strong rotating air stream that exerts strong rushing effect to raw material on the wall, there fore the phenomenon of adhesive wall is removed.
3. At the bottom of drier, where is high temperature area, heat sensitivity raw material can not contact with heat surface directly, therefore it solves the carbonized and changed color problems of heat sensitivity raw material:
4. Because gas speed t circle inside the drying chamber is high and the staying time of raw material is short, high efficiency and quick speed can be realized. It is possible for small equipment to carry out large-scale production;
5.There are rotational flow pieces inside the drying chamber. It is used to control the moisture and granule of raw material to the needed level.
Technical parameters
model\item
ID od main
machine
air amount
evaporated
moisture
max. equipped
capacity
max. hight
occupied area
XSG-2.5
250
500-800
23-30
9.55
4.0
15
XSG-4
400
1150-2300
58-73
21.4
4.6
27
XSG-6
600
2500-5100
130-163
34.2
5.5
39
XSG-8
800
4500-9000
238-297
63.5
6.0
40
XSG-10
1000
7000-13500
345-430
68
6.5
55
XSG-12
1200
10000-20000
515-645
94
6.8
62
XSG-14
1400
16600-28000
730-910
130
7.0
89
XSG-16
1600
18000-38100
962-1203
160
7.2
160