Top-ranking rotary dryer in China

Professional Clay drying machine
1.low cost,
2.low consumption,
3.high capacity,
4.easy operation and maintenance, etc
Professional Clay drying machine
Introduction
Drier also named as Drying Machine and Rotary Drier. It is used for drying materials with a certain humidity or granularity in milling of ores, building materials, metallurgy and chemical industry. The drying machinery has a strong adaptability of materials and it can dry various materials. The operation is very simple and liable. For this reason, it is used .
structure:
1. Main tube body, front roller circle, rear roller circle, gear, side plate of rolls,
small gear, outlet part, reduce
box,
motor , heated air duct, inlet month
and furnace body and other structure.
2. The fuel can be coal, fire, gas, and electricity and other fuel.
3. We can design the gas generator furnace, firebox, and euipped elevator,
belt conveyor , constant feeding
machine, dust collector cyclone. Draft fan and so on
Working principle of the Rotary Dryer
Material to be dried enters the drier, and as the dryer rotates, the material is lifted up by a series of internal fins
lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to
the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving
toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge
end (known as countercurrent flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.
Technical Specifications for your reference:
Type
Inclination
(%)
Rotation speed
(r/min)
Input temperature
(ºC)
Motor power
(kw)
Capacity
(t/h)
Weight
(t)
Φ600×6000
3-5
3-8
≤700
3
0.5-1.5
2.9
Φ800×8000
3-5
3-8
≤700
4
0.8-2.0
3.5
Φ800×10000
3-5
3-8
≤700
4
0.8-2.5
4.5
Φ1000×10000
3-5
3-8
≤700
5.5
1.0-3.5
5.6
Φ1200×12000
3-5
3-8
≤700
11
2-6
14.8
Φ1500×12000
3-5
2-6
≤800
18.5
3.5-9
17.8
Φ1800×18000
3-5
2-6
≤800
22
5-12
31
Φ2000×18000
3-5
1.5-6
≤800
30
6-15
43
Φ2200×18000
3-5
1.5-6
≤800
37
10-18
52
Φ2400×20000
3-5
1.5-5
≤800
45
18-30
60
Φ2800×20000
3-5
1.5-5
≤800
55
25-35
72
Φ3000×20000
3-5
1.5-5
≤800
55
32-40
91
Φ3000×25000
3-5
1.5-5
≤800
75
40-55
104.9