High efficiency rotary drum drier,dryer

1.we supply rotary drum drier
2.models can be customized
3.ISO 9001 Approved
4.market:Southeast Asia,South Asia,Middle East
working principles:
The heat source of drier is from combustion devices. This drier adopts direct flow heating method. So the material should be sent to the shell by the feed chamber and feed chute. After that the material will be pushed backward by the spiral shoveling plate. As the drier is located with a tilt, the material flows to the end by the gravity and circumduction meanwhile it is shoveled repeatedly by the shoveling plate to the upper end then comes down constantly, forming an even curtain in the drum and exchanging heat fully with the hot current in the drum. With the material being raised and scattered again and again, the moisture is dried gradually. Finally it is dried totally.
Applications:

It is widely used in building material, metallurgy, chemical engineering, and cement industries for the drying of slag lime stone, powdered coal, slag and clay.
Sketch map:

Technical specifications
:
Model
(m)
Diameter
(mm)
Speed
(r/min)
Length
(m)
Slope
( % )
Inlet
Temperature(°C)
Power
(kw)
0.6×8-12
600
3.8
8-12
3-5
<700
4
Models can be customized according to per customer’s requirements