Pressure Atomizing Granulating Dryer

stainless steel SUS304, 316, 316L
The principle of this dryer is cooling liquid material directly into ball-shape granule.After 100mesh filtering, the raw material is feed to high-pressure nozzle and dispersed into revolving hollow droplets. The droplets contact with inlet air and exchange heat instantly forming granule products. Most of the big granule are collected in the tower bottom under gravity; micro granule and waste gas are collected by cyclone. After secondary dedusting device separation, the waste gas will be exhausted by fan. The recovery proportion could be 96-98%
The atomizing granulating is fulfilled by concurrent pressure, so the customer can get different granule size by adjusting spouting liquid and nozzle size, solution concentration, or additive. Upstream spray and convection can be available according to different materials
High-speed Granulating, 5-30 seconds,instant modeling
Suitable for heat sensitive material,color,flavor,taste remained.
Simple operation and control, good for continuously control production
Product with good decomposition, flowability and solubility

Type

Spec &Parameter
YPG-25
YPG-50
YPG-100
YPG-150
YPG-200
YPG-300
Max capacitykg/h
25
50
100
150
200
300

inlet temp(T)
180-350

outlet temp(T)
90-100
Purification of
inlet air
GMP standard
Atomizing pressure MPa
2-20 according to material requirements
Product collection
Gas-solid separator, one or two discharger
Refrigeration
Cold saltwater+heat exchangernatural windcold water+heat exchanger,etc
Control meter
Hot air and exhaust air control indicator, feeding pump poleless regulation and other technical parameters interlock.

Note1.Capacity is related with material features and cold air inlet/outlet temp, above data is for reference only
2. Except for above mentioned, the type can also be designe