Advanced sludge dryer with long service life

Specification:
1.perfect dyring results
2.high quality
3.long service life
Advanced sludge dryer with long service life
Description
1.strong resistance to overload,large capacity,low fuel consumption,low drying cost.
2.downstream drying way,flue gas into the dryer from the same side with the wet material,high temperature flue gas can be used to obtain a high evaporation intensity.the dryer has low outlet temperature and high thermal efficiency.
3.change the operating parameters according to different material nature,to have a stable full cut material curtain,and make a fully heat exchange.
4.new feeding,discharging device,prevent the blocking, discontinutos, unevenness of feeding and returning materials,reduce the load of dust pelletizing system.
5.new internal structure,strengthen the cleaning and heat conduction of dispersed material,eliminate sticky phenomenon of the cylinder wall and much adaptable to the water,adhesive of the material.
6.dryer achieve a “zero thrust”,greatly reducing the wear of block roller,so the cylinder operateing smooth and reliably.
7.the dryer adopt “self-aligning roller-type device”,so that the roller and the rolling ring in linear touch forever,thereby greatly reducing the wear and power loss.
Advantages
1. With compact structure, small floor area, reliable working, low energy consumption, high thermal efficiency, material drying effect is good, easy to realize automation control, few operators.
2. Low air out temperature, dust removal equipment can be used long time.
3. Adopting new combined type raising device, according to users’ demand regulate and control the required eventually moisture target breezily.
relaxed regulation to end moisture indicators.
4. High degree of automation, easy operation, stable working.
5. Equipment investment is imported products 1/6, small investment, gains fast.
6. Equipment is new energy-saving products, it can energy saving about 20% than similar products.
7. Fuel can adapt to coal, oil, steam etc.




Components

Rotary drier is mainly composed of cylinder, under frame, feeding and discharging devices, transmission device, gear cover, etc. (Optional auxiliary equipment includes combustion chamber, feeder and discharging device, and dust collection equipment). Rotary drier manufactured by us adopts new lifting plate, which is of functions like guiding, current-sharing, and material raising. The materials are raised and evenly drop so that they are in full contact with heat for better drying efficiency. Our rotary drier is designed with the best working conditions, which enables it to save 10-15% of energy and increase 10-15% of productivity compared with common dryers.