Adjustable silica sand dryer with competitive price

Expert silica sand dryer
1.Time delivery
2.Saving 5% energy
3.Adopt advanced technical from Germany
4.OEM service offered
The components of silica sand dryer:
1. Cylinder/drum;
2. Frontal roll ring;
3. Behind roll ring;
4. Wheel gear;
5. Block roller;
6. Drag roll;
7. Small gear;
8. Discharging section;
9. Lifting board;
10. Reducer;
11. Motor;
12. Air channel;
13. Feed chute;
14. Furnace and other components. Besides, it also can accord users' needs to design gas producer, the combustion chamber or supporting elevator, belt conveyor, quantitative feeder, cyclone dust collector, Fan etc.

Working principle of silica sand dryer:
1. The sand was sent to hopper by belt conveyor or bucket elevator and then by the feeding machine of hopper through charging pipe into the feeding side.
2. The slope of feeding pipeline should bigger than the materials' natural dip angle, in order to sand smoothly flow into the dryer machine.
3. The drum of dryer is a rotary drum which is slightly obliquely with the horizontal line. Add the materials from the higher side, heating body goes into the lower end, form countercurrent contact with materials, also exists the heat body and materials together concurrent flow into the barrel. Along with the cylinder rotating, the materials move to the lower end by gravity.
4. During the moving process, wet materials in the cylinder directly or indirectly got heat from the heating body, make wet materials to dry, then in the discharging end the materials were sent out by belt conveyor or screw conveyor.
5. In the cylinder's inside wall of sand dryer was equipped with shoveling plate, its function is that copied up the material and then scatter down, make the contact surface of materials and airflow more wider, in order to improve drying speed and promote materials move ahead. Heat body are generally classified into the hot air and flue gas etc.
6. After the heat body through dryer, generally need the cyclone dust collector to trap materials in the gas. If you want to reduce tail gas dust load any further, also should pass bag filters or dust washer, then let out.
Technical parameters:
Model
Rotor diameter
(mm)
Drum length
(m)
Main reducer

Speed
(r/min)
Production capacity
(t/h)
Power
(kw)
Volume(m
3
)
Weight
(t)
Model
Ratio

Φ0.6X0.8
Φ600
8
JZQ350-16-1

8
0.5-1.5
3
2.26
5.1
Φ0.8X1.0
Φ800
10
JZQ450-16-11

7.2
0.8-2.2
4
5.02
6.9
Φ1.0X10
Φ1000
10
JZQ450-16-11

6.73
1-3.8
5.5
7.85
7.5
Φ1.2X12
Φ1200
12
ZL50-16-1

5.8
1.8-5.5
11
13.31
13.8
Φ1.5X12
Φ1500
12
JZQ500-111-2F
16.46
4.8
4-9
15
21.2
22.3
Φ1.5X 15
Φ1500
15
ZQ50-1611-2
16.46
4.8
4-10
18.5
26.5
28.8
Φ1.8X14
Φ1800
14
JZQ650-111
18.84
3.2
6-12
30
48.22
39.8
Φ2.2X12
Φ2200
12
JZQ650-111
31.5
3
10-20
30
45.6
40.5
Φ2.2X14
Φ2200
14
JZQ750-111
31.5
3
10-22
37
53.2
48.3
Φ2.2X16
Φ2200
16
ZJQ750-111
31.5
3
10-23
37
60.1
51
Φ2.2X18
Φ2200
18
JZQ750-111
31.5
3
10-25
37
70.43
53.3
Φ2.4X14
Φ2400
14
ZL850-13-1
27.6
2.83
20-43
45
63.3
61.5
Φ2.4X18
Φ2400
18
ZL85-13-1
27.16
2.83
20-40
45
81.4
68.6
Φ2.4X20
Φ2400
20
ZL85-13-1
27.16
2.83
20-40
45
90.43
78.4
Φ2.8X24
Φ2800
24
ZL100-16-1
31.5
2.59
20-45
55
147.8
97
Φ3.0X20
Φ3000
20
ZL100-16-1
41.54
2.6
25-48
55
141.3
102
Φ3.0X25
Φ3000
25
ZL100-16-1
41.54
2.6
25-48
75
176.7
110
Φ3.2X25
Φ3200
25
ZLH115
41.54
2.1
30-55
110
201
148