XF Series Horizontal fluid bed medcine dryer

Through operation and improvement for twenty years, XF medcine dryer has play an active part in a lot of industries.
Description
Through operation and improvement for twenty years, XF fluid bed medcine dryer has play an active part in the fields of pharmaceutical, chemical, foodstuff industries, grain processing and so on. It consists of air filter, fluid bed, cyclone separator, bag filter, high speed centrifugal fan, operation table and so on. Because of the different raw material property, it is necessary to equip dust remover in accordance with particle needs. It may select cyclone separator and bag filter at the same time or one of them. In general speaking, cyclone separator can be selected if the raw material is large and bag filter may be selected if raw material is light. Moreover, there is feeding device for your selection.

Applications
It is widely used for medicines, chemical raw material, foodstuff, grain processing, feed and so on. For example, crude drug, tablet granule, Chinese medicine infusion, foodstuff of health protection, drinking infusion, feed, resin, citric acid and other powders. The suitable diameter of raw material will be 0.1-6mm. The best diameter of raw material will be 0.5-3mm.

Principle
Clean and hot air enters into fluid bed through distributor of valve plate. The wet raw material fed from feeder forms the boiling state by hot air. Because of the wide contact between hot air and raw materials, drying time is short. The air enters from front of bed, boiling in bed for several minutes, and discharged from other side of bed. The machine works in negative pressure.

Explanation
All equipment should be placed in level and fixed with foundation screw on the ground. All parts should be sealed well; fan should be installed at out door or in the special noise silencing room. The fan can be adjusted slightly in accordance with particle conditions.

Technical Parameters:
type/
item
drying capa-
city
(kg/h)
power od
fan
(kw)
air
pres-sure
(Pa)
air
amount
(m
3
/h)
tem.of inlet air()
max cons-ume
(J)
overall dimensions
(m)L
×W×H
form of
feeding
A type
B type
C type
XF10
10-15
7.5
5.5×
10
3
1500
60-200
2.0×
10
8
4×3.5
×3.2
3.5×3.5
×3
5×3.5
×3.5
1.feeding
with star2.
transpor
-tation
with air force automat-ically
XF20
20-25
11
5.8×
10
3
2000
60-200
2.6×
10
8
4.5×4
×4.2
4×4
×3.2
6×4
×4.5
XF30
30-40
18.5
7.1×
10
3
3850
60-200
5.2×
10
8
5×4
×4.5
4×4
×4.2
6×4
×5
XF50
50-80
30
8.5×
10
3
7000
60-200
1.04×
10
9
5×4.8
×4.8
4×4.8
×4.5
6×4.8
×5