Drying machine of steam heating
1.thermal efficiency is high
2.simple and excellent structure
3.wide application
Drying machine of steam heating
Main applications
Hot air circulation oven is suitable for heating and dehumidifying of raw materials and products for pharmacy-eutical,chemical,foodstuff and light and heavy industries.
Main features
Most of the hot winds are cycled within the box. It has high transmission efficiency, and can save energy. By making of the forced ventilation,the upper and lower temperature difference can be reduced. It is characterize-ed by Iow noise,stable operation,automatic temperature-control and convenient maintenance. This is according with the requirements of GMP.
Working principle
The steam or electricity is used as the heat source. The axial fan is used for heating the air of the heat exchanger in node of convective heat exchanging. The hot air stream transfers the heat to the material through the drying tray. The fresh air enters the drying box through air inlet hole for making-up. The humid air is exhausted from the dehumidifying hole. In this way, the machine keeps the proper relative humidity in the drying box.
Main technical parameters
Item No
Capacity (kg/h)
Power of fan (kw)
Steam consumption (kg/h)
Radiator area
Volume of wind (m³/h)
Amount of oven
Amount of baker
Meas. (mm)
Weight (kg)
CT-C-O
50
0.45
10
10
3450
24
1
1430×1350×2300
400
CT-C-I
100
0.45
20
20
3450
48
2
2430×1350×2300
620
CT-C-II
200
0.9
40
40
6900
96
4
2430×2350×2300
1130
CT-C-III
300
1.35
70
80
10350
144
6
3300×2350×2300
1560
CT-C-IV
400
1.8
90
100
13800
192
8
4300×2350×2300
2120
Wednesday, September 28, 2011
Drying machine with single stove
Drying machine with single stove:1,high dry capacity 2,smooth rotation 3,low energy consumption 4,easy operation 5 high output.
drying machine
Introduction
Drying machine with single stove is suitable for drying materials like sawdust ,rice hull ,milling wheat straw ,corn stalks and so on .The moisture of wet materials is at 20--60%.This wood dryer reduces the moisture to 8--12% with the advantages of lower cost consumption and high efficiency .
The machine is mainly made up of
hot-air stove
(1 or 2 stoves),
buffer
,
blower
,the
pipes
and
cyclone separator
.
Working principle
: In the dryer, high-speed hot air stream sustain raw material in the suspending state, then the material is dried. Since air stream speed is very high, and materials suspending in air stream, the heat transfer surface between air and raw material is large, so the heat transfer rate is high.
It is special suitable for drying heat sensitive material like
sawdust
,
rice hull
,
milled wheat straw
,
milled cotton
/
corn stalks
and so on. It also can be used for drying the
grain
better.
The HGJ SERIES dryer has the feature of low cost and high efficiency. It can reduce moisture from
40-45%
to
8-12%
.
Specification
Model
Power (kw)
Capacity (kg/h)
Net/Gross Weight (kg)
Raw materials Diameter(mm)
Packing Dimension(m³)
HGJ-I
4
300-400
1000/1100
<1mm & < 5mm
6.36
HGJ-II
7.5+0.75+0.75
500-600
2040/2260
<1mm & < 5mm
12.41
HGJ-III
11+0.75+075+5
700-800
2850/3080
<1mm & < 5mm
13.59
HGJ-IV
15+0.75+0.75
1000-1200
2850/3080
<1mm & < 5mm
13.59
drying machine
Introduction
Drying machine with single stove is suitable for drying materials like sawdust ,rice hull ,milling wheat straw ,corn stalks and so on .The moisture of wet materials is at 20--60%.This wood dryer reduces the moisture to 8--12% with the advantages of lower cost consumption and high efficiency .
The machine is mainly made up of
hot-air stove
(1 or 2 stoves),
buffer
,
blower
,the
pipes
and
cyclone separator
.
Working principle
: In the dryer, high-speed hot air stream sustain raw material in the suspending state, then the material is dried. Since air stream speed is very high, and materials suspending in air stream, the heat transfer surface between air and raw material is large, so the heat transfer rate is high.
It is special suitable for drying heat sensitive material like
sawdust
,
rice hull
,
milled wheat straw
,
milled cotton
/
corn stalks
and so on. It also can be used for drying the
grain
better.
The HGJ SERIES dryer has the feature of low cost and high efficiency. It can reduce moisture from
40-45%
to
8-12%
.
Specification
Model
Power (kw)
Capacity (kg/h)
Net/Gross Weight (kg)
Raw materials Diameter(mm)
Packing Dimension(m³)
HGJ-I
4
300-400
1000/1100
<1mm & < 5mm
6.36
HGJ-II
7.5+0.75+0.75
500-600
2040/2260
<1mm & < 5mm
12.41
HGJ-III
11+0.75+075+5
700-800
2850/3080
<1mm & < 5mm
13.59
HGJ-IV
15+0.75+0.75
1000-1200
2850/3080
<1mm & < 5mm
13.59
Drying machine--0086 13903817193
drying machine:
suitable for drying all types of agricultural products
High capacity and quality
low price and energy
drying machine
Dryer using hot air drying system, power of small, low power consumption, fast-drying, drying of water production in accordance with the size of the raw materials, power 4km.
Technical parameters
:
Dry Capacity
200kg/h
Grain size of product
diameter< 3mm Diameter
length< 5mm Length
Motor power
4KW
Temperature of the hot air
180~250
Concact Information
Name: Ting Song
Cell: 86 13903817193
Tel: 86 371 65903478
suitable for drying all types of agricultural products
High capacity and quality
low price and energy
drying machine
Dryer using hot air drying system, power of small, low power consumption, fast-drying, drying of water production in accordance with the size of the raw materials, power 4km.
Technical parameters
:
Dry Capacity
200kg/h
Grain size of product
diameter< 3mm Diameter
length< 5mm Length
Motor power
4KW
Temperature of the hot air
180~250
Concact Information
Name: Ting Song
Cell: 86 13903817193
Tel: 86 371 65903478
Drying machine/Drying equipment/SINON dryer
1.Rotary dryer equipment
2.Continuous operation
3.Simple structure
4.Low maintenance costs
5.Applicable to a wide range
Revolution of tube drying machinery applise to buiding material,metallurgy,chemical industry,cement industrymaterial such as mineral waste residue,clay broadly,Throw up and scatter commponent made up of such as expecting that board,drive are equpped with,propping up the device and the sealing washer mainly from the solid of revolution. Have strcture reasonableness,is of excellent workmanship,output is high,energy consumption is low ,move round to wait for merit conveniently.
Technical parameter list
Product specifications
Capacity
Motor
Reducer
SizeLength × width × height
(mm)
Weight (T)
Volume(M
3
Speed (r/min)
Gradient%
Model
Power (Kw )
Model
Φ1×10M
7.85
6.73
3-5
Y132M2-6
5.5
ZL350--25
10000×1876×2069
7.5
Φ1.2×6M
6.8
5.8
3-5
Y132M2-6
5.5
ZL359--25
6000×2159×2475
7.97
Φ1.2×8M
9.1
5.8
3-5
Y132M2-6
5.5
ZL350--25
8000×2159×2475
8.75
Φ1.2×10M
11.31
5.8
3-5
Y160M-6
7.5
ZL350--25
10000×2159×2475
9.52
Φ1.2×12M
13.31
5.8
3-5
Y160L-6
11
ZQ500--31.5
12000×2159×2475
13.1
Φ1.5×8M
14.14
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
8000×2655×2895
15.74
Φ1.5×10M
17.67
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
10000×2655×2895
17.93
Φ1.5×12M
21.2
4.8
3-5
180L-6
15
ZQ650--31.5
12000×2655×2895
22.3
Φ1.5×14M
24.9
4.8
3-5
180L-6
15
ZQ650--31.5
14000×2655×2895
25.1
2.Continuous operation
3.Simple structure
4.Low maintenance costs
5.Applicable to a wide range
Revolution of tube drying machinery applise to buiding material,metallurgy,chemical industry,cement industrymaterial such as mineral waste residue,clay broadly,Throw up and scatter commponent made up of such as expecting that board,drive are equpped with,propping up the device and the sealing washer mainly from the solid of revolution. Have strcture reasonableness,is of excellent workmanship,output is high,energy consumption is low ,move round to wait for merit conveniently.
Technical parameter list
Product specifications
Capacity
Motor
Reducer
SizeLength × width × height
(mm)
Weight (T)
Volume(M
3
Speed (r/min)
Gradient%
Model
Power (Kw )
Model
Φ1×10M
7.85
6.73
3-5
Y132M2-6
5.5
ZL350--25
10000×1876×2069
7.5
Φ1.2×6M
6.8
5.8
3-5
Y132M2-6
5.5
ZL359--25
6000×2159×2475
7.97
Φ1.2×8M
9.1
5.8
3-5
Y132M2-6
5.5
ZL350--25
8000×2159×2475
8.75
Φ1.2×10M
11.31
5.8
3-5
Y160M-6
7.5
ZL350--25
10000×2159×2475
9.52
Φ1.2×12M
13.31
5.8
3-5
Y160L-6
11
ZQ500--31.5
12000×2159×2475
13.1
Φ1.5×8M
14.14
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
8000×2655×2895
15.74
Φ1.5×10M
17.67
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
10000×2655×2895
17.93
Φ1.5×12M
21.2
4.8
3-5
180L-6
15
ZQ650--31.5
12000×2655×2895
22.3
Φ1.5×14M
24.9
4.8
3-5
180L-6
15
ZQ650--31.5
14000×2655×2895
25.1
Tuesday, September 27, 2011
Drying machine/Rotary Dryer
Rotary Dryer
1)Superior quality
2)Top-ranking materials
3)Consummate design
The dryer is a type of industrial dryer employed to reduce or minimize the liquid moisture content of the material it is handling by bringing it into direct contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.
Model
Specifications
Speed
(r/m)
Power
(kw)
Weight
(T)
Diameter (m)
Length
(m)
Gradient
(%)
Φ1×12M
1.0
12
5
6.2
7.5
13.2
Φ1.2×12M
1.2
12
5
5.99
11
15.7
Φ1.2×14M
1.2
14
5
3.99
11
17.3
Φ1.5×12M
1.5
12
5
4.02
15
17.4
Φ1.8×14M
1.8
14
5
4.59
18.5
27.2
Φ1.8×16M
1.8
16
5
5.48
22
39.6
Φ2.0×14M
2.0
14
5
4.59
18.5
31.6
Φ2.0×16M
2.0
16
5
4.59
30
43.9
Φ2.2×14M
2.2
14
5
4.59
22
37.4
Φ2.2×27M
2.2
27
5
4.58
37
79.2
Φ2.4×14M
2.4
14
5
3.6
30
46.2
Φ2.4×18M
2.4
18
5
3.12
37
66.7
Φ2.8×18M
2.8
18
5
3.12
45
89.3
Φ3.0×20M
3.0
20
5
3.67
55
95.5
Φ3.2×22M
3.2
22
5
3.4
75
141.6
Φ3.6×25M
3.6
25
5
3.1
110
188.6
SINON Machinery Manufacturing Co,.Ltd
Address:North of Yong'an Road,Gongyi city,Henan Province,China
Tel +8637169537555
+8637164373688
Fax +8637164373899
1)Superior quality
2)Top-ranking materials
3)Consummate design
The dryer is a type of industrial dryer employed to reduce or minimize the liquid moisture content of the material it is handling by bringing it into direct contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.
Model
Specifications
Speed
(r/m)
Power
(kw)
Weight
(T)
Diameter (m)
Length
(m)
Gradient
(%)
Φ1×12M
1.0
12
5
6.2
7.5
13.2
Φ1.2×12M
1.2
12
5
5.99
11
15.7
Φ1.2×14M
1.2
14
5
3.99
11
17.3
Φ1.5×12M
1.5
12
5
4.02
15
17.4
Φ1.8×14M
1.8
14
5
4.59
18.5
27.2
Φ1.8×16M
1.8
16
5
5.48
22
39.6
Φ2.0×14M
2.0
14
5
4.59
18.5
31.6
Φ2.0×16M
2.0
16
5
4.59
30
43.9
Φ2.2×14M
2.2
14
5
4.59
22
37.4
Φ2.2×27M
2.2
27
5
4.58
37
79.2
Φ2.4×14M
2.4
14
5
3.6
30
46.2
Φ2.4×18M
2.4
18
5
3.12
37
66.7
Φ2.8×18M
2.8
18
5
3.12
45
89.3
Φ3.0×20M
3.0
20
5
3.67
55
95.5
Φ3.2×22M
3.2
22
5
3.4
75
141.6
Φ3.6×25M
3.6
25
5
3.1
110
188.6
SINON Machinery Manufacturing Co,.Ltd
Address:North of Yong'an Road,Gongyi city,Henan Province,China
Tel +8637169537555
+8637164373688
Fax +8637164373899
Drying machine/ore equipment/SINON dryer
1.Rotary dryer equipment
2.Continuous operation
3.Simple structure
4.Low maintenance costs
5.Applicable to a wide range
Revolution of tube drying machinery applise to buiding material,metallurgy,chemical industry,cement industrymaterial such as mineral waste residue,clay broadly,Throw up and scatter commponent made up of such as expecting that board,drive are equpped with,propping up the device and the sealing washer mainly from the solid of revolution. Have strcture reasonableness,is of excellent workmanship,output is high,energy consumption is low ,move round to wait for merit conveniently.
Technical parameter list
Product specifications
Capacity
Motor
Reducer
SizeLength × width × height
(mm)
Weight (T)
Volume(M
3
Speed (r/min)
Gradient%
Model
Power (Kw )
Model
Φ1×10M
7.85
6.73
3-5
Y132M2-6
5.5
ZL350--25
10000×1876×2069
7.5
Φ1.2×6M
6.8
5.8
3-5
Y132M2-6
5.5
ZL359--25
6000×2159×2475
7.97
Φ1.2×8M
9.1
5.8
3-5
Y132M2-6
5.5
ZL350--25
8000×2159×2475
8.75
Φ1.2×10M
11.31
5.8
3-5
Y160M-6
7.5
ZL350--25
10000×2159×2475
9.52
Φ1.2×12M
13.31
5.8
3-5
Y160L-6
11
ZQ500--31.5
12000×2159×2475
13.1
Φ1.5×8M
14.14
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
8000×2655×2895
15.74
Φ1.5×10M
17.67
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
10000×2655×2895
17.93
Φ1.5×12M
21.2
4.8
3-5
180L-6
15
ZQ650--31.5
12000×2655×2895
22.3
Φ1.5×14M
24.9
4.8
3-5
180L-6
15
ZQ650--31.5
14000×2655×2895
25.1
2.Continuous operation
3.Simple structure
4.Low maintenance costs
5.Applicable to a wide range
Revolution of tube drying machinery applise to buiding material,metallurgy,chemical industry,cement industrymaterial such as mineral waste residue,clay broadly,Throw up and scatter commponent made up of such as expecting that board,drive are equpped with,propping up the device and the sealing washer mainly from the solid of revolution. Have strcture reasonableness,is of excellent workmanship,output is high,energy consumption is low ,move round to wait for merit conveniently.
Technical parameter list
Product specifications
Capacity
Motor
Reducer
SizeLength × width × height
(mm)
Weight (T)
Volume(M
3
Speed (r/min)
Gradient%
Model
Power (Kw )
Model
Φ1×10M
7.85
6.73
3-5
Y132M2-6
5.5
ZL350--25
10000×1876×2069
7.5
Φ1.2×6M
6.8
5.8
3-5
Y132M2-6
5.5
ZL359--25
6000×2159×2475
7.97
Φ1.2×8M
9.1
5.8
3-5
Y132M2-6
5.5
ZL350--25
8000×2159×2475
8.75
Φ1.2×10M
11.31
5.8
3-5
Y160M-6
7.5
ZL350--25
10000×2159×2475
9.52
Φ1.2×12M
13.31
5.8
3-5
Y160L-6
11
ZQ500--31.5
12000×2159×2475
13.1
Φ1.5×8M
14.14
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
8000×2655×2895
15.74
Φ1.5×10M
17.67
4.8
3-5
Y160L-6
11
ZQ650--2F
ZQ650--1F
10000×2655×2895
17.93
Φ1.5×12M
21.2
4.8
3-5
180L-6
15
ZQ650--31.5
12000×2655×2895
22.3
Φ1.5×14M
24.9
4.8
3-5
180L-6
15
ZQ650--31.5
14000×2655×2895
25.1
Drying machine
Usage:Dry Various textile, linter/chemical fiber clothing & latex after above iterms dehydrated.Widely used by textile etc
Usage:
Dry Various textile, linter/chemical fiber clothing & latex products after above iterms dehydrated.Widely used by textile, clothes, hotel, hospital,army etc companies.
Advantage
: high efficiency,save energy,low noise,safty etc.
Structure brief introduction
1- The machine is made of high grade stainless steel.Be able to bear corrosion. Do not lose fabric when workig
2- Big door,so be convinient to through in or take out clothes etc.There is glass window on the door.People could watch the dry condition of clothes etc.
3- The electricity charges system of the machine could control the machine the positive and negative rotation.According to demands of defferent material dried,users could adjust the drying time.The whole drying process is automatic.
4-The machine is assembled Timing under the control of device.According to the demands of washing, tune up the time.The machine shall stop working at the arming time automatically.
5- The machine is small valume.It could be used at variety place.
Usage:
Dry Various textile, linter/chemical fiber clothing & latex products after above iterms dehydrated.Widely used by textile, clothes, hotel, hospital,army etc companies.
Advantage
: high efficiency,save energy,low noise,safty etc.
Structure brief introduction
1- The machine is made of high grade stainless steel.Be able to bear corrosion. Do not lose fabric when workig
2- Big door,so be convinient to through in or take out clothes etc.There is glass window on the door.People could watch the dry condition of clothes etc.
3- The electricity charges system of the machine could control the machine the positive and negative rotation.According to demands of defferent material dried,users could adjust the drying time.The whole drying process is automatic.
4-The machine is assembled Timing under the control of device.According to the demands of washing, tune up the time.The machine shall stop working at the arming time automatically.
5- The machine is small valume.It could be used at variety place.
Subscribe to:
Posts (Atom)