Drying equipment for clay
high efficiency Drying equipment
Energy saving equipment
ISO9001-2000 Drying equipment
Drying equipment
Drying equipment is widely used in building materials,metallurgy,chemical industry and cement
industry to dry the materials.
Dryingequipment is suitable for drying materials with humidity in mineral dressing, building material, metallurgy,
chemical, etc.
Body of cylinder adopts the structure of combination. Auto-jointing of submerged arc improves the precision of equipment, which is convenient for transportation and installment.
Setting up the second granulation area improves the effect of granulation---- surface of grain is smooth and high-intensive.
The inner of cylinder adopts compound winnow board which enlarges the interface of exchange between material and heat energy so that the equipment has the advantages of sufficient heat exchange, low consumption of energy and high efficiency.
Equipped with the device of in-out, temperature sense showing, shaking device and special airproof set, the capability of the whole machine and the capacity of product efficiency are improved completely.
The burning kiln designed is of high-effect and energy-saving meanwhile the operation is simple and convenient, the area occupies is little, and temperature-control is convenient.
Drying equipment
Type
rotation speed(r/min)
Inclination (%)
input temperature(°C)
capacity(t/h)
motor power(kw)
weight(T)
GZø800×8000
3.8
5
700
0.8-2
5.5
3.5
GZø900×10000
3.8
5
700
1-3
7.5
5.6
GZø1200×10000
3
5
700
2-6
11
9.6
GZø1500×12000
2.08
5
800
4-12
15
17.76
GZø1800×14000
2.08
5
800
8-25
18.5
29
GZø2200×14000
4.7
5
800
12-30
22
33
GZø2400×18000
4
5
800
18-40
37
53.3
Friday, September 2, 2011
2011 New China Most Popular Zinc Oxide Rotary Kiln
Zinc Oxide Rotary Kiln
1.cost-effective, low profit
2.environemental machine
3.better quality
Zinc Oxide Rotary Kiln
1.cost-effective, low profit
2.environemental machine
3.better quality
1.Usage
This machine is widely used in mine, building materials, chemical, metallurgy, cast industries and so on. It can dry the material such as sand, slag, clay, fly ash, coal, iron power, quartz sand, and ore and so on.
2. Feature
(1).Adopting the heat change technology, this machine has the advantage of high efficiency and less energy consumption.
(2).The efficiency of self heat preservation is higher than 80%, for single cylinder type, it is 35%
(3).Compared with the single cylinder type with same capacity, the 3cylinder type only cover the 50% ground. It will save the 50% of building cost, 60% power cost, and above 60%fuel.
(4).The fuel can be coal, oil and gas.
(5).With the heat resisting, hear wearing alloy steel plates, its life is 4 times as the common steel plates.
(6).The water content of the product is less than 0.5%
(7).The temperature of out air is low, and it will increase the life of the dust catching system.
(8).Without the big and small gears, it work with riding wheel.
(9).The temperature of out air is low, and it will increase the life of dust catching system.
(1)0. Simple operation, it is easy to adjust the date of the water content of the product.
Note: any change of technical date will not inform additionally.
1.cost-effective, low profit
2.environemental machine
3.better quality
Zinc Oxide Rotary Kiln
1.cost-effective, low profit
2.environemental machine
3.better quality
1.Usage
This machine is widely used in mine, building materials, chemical, metallurgy, cast industries and so on. It can dry the material such as sand, slag, clay, fly ash, coal, iron power, quartz sand, and ore and so on.
2. Feature
(1).Adopting the heat change technology, this machine has the advantage of high efficiency and less energy consumption.
(2).The efficiency of self heat preservation is higher than 80%, for single cylinder type, it is 35%
(3).Compared with the single cylinder type with same capacity, the 3cylinder type only cover the 50% ground. It will save the 50% of building cost, 60% power cost, and above 60%fuel.
(4).The fuel can be coal, oil and gas.
(5).With the heat resisting, hear wearing alloy steel plates, its life is 4 times as the common steel plates.
(6).The water content of the product is less than 0.5%
(7).The temperature of out air is low, and it will increase the life of the dust catching system.
(8).Without the big and small gears, it work with riding wheel.
(9).The temperature of out air is low, and it will increase the life of dust catching system.
(1)0. Simple operation, it is easy to adjust the date of the water content of the product.
Note: any change of technical date will not inform additionally.
High Efficiency Drying Machine
New Design Widely Use dryer
1.high quality
2. simple structure
3.easy oparate dryer
type:dryer
NewHigh Efficiency Drying Machine
1.Sawdust Dryer is suitable for dry the grain, sawdust, etc small granular materials. It can dry the raw materials quickly and with higher capacity.
1. For raw materials with heavy humidity which is above 12%, you need to install a Dryer before further processing. This Air Current Type Dryer can reduce the humidity of wood materials below 12% per time. The Cost of this Air Current Dryer is much lower than Rotary Dryer.
2. It is professionally designed for drying different kinds of wood sawdust. It has advantages of low cost, low consumption, high capacity, easy operation and maintenance, etc. In addition, the round places of pipes can be changed to any angle which can save space and solve plant dimension limitation.
3. Regarding FR-I and HGJ-II Type Dryer ,it is suitable to process materials which moisture content between 20%-25%.It can reduce the MS to 8%-12% one drying time.
4. Regarding FR- II it is suitable to process materials which moisture content between 35%-50%.It can reduce the humidity to 8%-12% one drying time. That means it can reduce approx.30% for one drying time. But if the humidity of materials is lower than 35%, the capacity will be increased with less of fuel.
5. All of round places can be adjusted to any angle of 360 centigrade degree according to operation request. Clients can change the angle of dryers base on the production field.
III. Technical Data of the sawdust dryer
pictures of High Efficiency Drying Machine
Ma
parameters of High Efficiency Drying Machine
Model
JX- I Type Dryer (with one stove)
JX- II Type Dryer (with two stoves)
Capacity
250-300(Kg/hour)
300-500 (Kg/hour)
Size of Input material (Diameter) mm
< 3 & < 5
< 5
Temperature of Hot Air
180°C~250°C
180°C~250°C
Power (KW)
5.5
7.5
Gross/Net Weight(Kg)
1300/1200
1800/1700
contact details
1.high quality
2. simple structure
3.easy oparate dryer
type:dryer
NewHigh Efficiency Drying Machine
1.Sawdust Dryer is suitable for dry the grain, sawdust, etc small granular materials. It can dry the raw materials quickly and with higher capacity.
1. For raw materials with heavy humidity which is above 12%, you need to install a Dryer before further processing. This Air Current Type Dryer can reduce the humidity of wood materials below 12% per time. The Cost of this Air Current Dryer is much lower than Rotary Dryer.
2. It is professionally designed for drying different kinds of wood sawdust. It has advantages of low cost, low consumption, high capacity, easy operation and maintenance, etc. In addition, the round places of pipes can be changed to any angle which can save space and solve plant dimension limitation.
3. Regarding FR-I and HGJ-II Type Dryer ,it is suitable to process materials which moisture content between 20%-25%.It can reduce the MS to 8%-12% one drying time.
4. Regarding FR- II it is suitable to process materials which moisture content between 35%-50%.It can reduce the humidity to 8%-12% one drying time. That means it can reduce approx.30% for one drying time. But if the humidity of materials is lower than 35%, the capacity will be increased with less of fuel.
5. All of round places can be adjusted to any angle of 360 centigrade degree according to operation request. Clients can change the angle of dryers base on the production field.
III. Technical Data of the sawdust dryer
pictures of High Efficiency Drying Machine
Ma
parameters of High Efficiency Drying Machine
Model
JX- I Type Dryer (with one stove)
JX- II Type Dryer (with two stoves)
Capacity
250-300(Kg/hour)
300-500 (Kg/hour)
Size of Input material (Diameter) mm
< 3 & < 5
< 5
Temperature of Hot Air
180°C~250°C
180°C~250°C
Power (KW)
5.5
7.5
Gross/Net Weight(Kg)
1300/1200
1800/1700
contact details
High Efficiency Dyan Sawdust Hot Air Dryer for charcoal making line(2011 widely used)
Sawdust Hot Air Dryer:
1. High production
2. Long durablity
3. Stable Performance
4. Easy to run
Sawdust Drying machine
prepare suitable moisture raw material for biomass briquette press. For briquetting press, it is only to control the moisture of raw material at a reasonable range that can make good reasult of biomass briquettes. Or the briquettes will be broken because of too loose or too dry.
Sawdust Drying Machine Series:
1. HGJ Series Single Stove DryerThe Moisture reducing rate of the dryer HGJ series is 8-12%. This dryer is equipped with one hot air boiler, it is suitable for drying raw material with moisture content less than 20-25%.If the moisture content of the raw material is higher than that, it will need several times of drying to achieve the requested moisture content for briquetting.
2. HGJ Series Twin Stove DryerTwin boiler dryer is a newly developed dryer with two hot air boilers, it is suitable for drying raw material with moisture content of 20% -45%, it can reduce moisture from 20%-45% to 8-12% only one passage or one time.
Operation Principle of the sawdust drying machine:
The whole system consists of fan blower, motor engine, fuel boiler, steel pipe, cyclone and air lock. In this system, wet material is input into hopper by screw feeder. Fuel furnace produces large volumn of hot air. Those hot air is driven into steel pipes, mixed with wet sawdust and moved through curving pipes and drying chamber by the power of fan blower. Fast moving hot air sustains and is mixed with raw material sent by spiral feeder in the suspending state through the steel pipe, moisture evaporates as the material traverses along the steel pipe and is rendered dry at teh discharge end. Humid air is continuously exhausted, thus the material is dried.
Technical Data:
Model
Capacity
Power
Weight
Moisture rate of powdery raw materials
HGJ-1
300kg/h
4.5kw
1100kg
under 30%
HGJ-2
400-500kg/h
5.5kw
2260kg
under 50%
HGJ-3
500-600kg/h
11kw
2280kg
under 30%
HGJ-4
700-900kg/h
15kw
3080kg
under 50%
Sawdust Drying Machine:
1. High production
2. Long durablity
3. Stable Performance
4. Easy to run
Sawdust Drying machine
prepare suitable moisture raw material for biomass briquette press. For briquetting press, it is only to control the moisture of raw material at a reasonable range that can make good reasult of biomass briquettes. Or the briquettes will be broken because of too loose or too dry.
Sawdust Drying Machine Series:
1. HGJ Series Single Stove DryerThe Moisture reducing rate of the dryer HGJ series is 8-12%. This dryer is equipped with one hot air boiler, it is suitable for drying raw material with moisture content less than 20-25%.If the moisture content of the raw material is higher than that, it will need several times of drying to achieve the requested moisture content for briquetting.
2. HGJ Series Twin Stove DryerTwin boiler dryer is a newly developed dryer with two hot air boilers, it is suitable for drying raw material with moisture content of 20% -45%, it can reduce moisture from 20%-45% to 8-12% only one passage or one time.
Operation Principle of the sawdust drying machine:
The whole system consists of fan blower, motor engine, fuel boiler, steel pipe, cyclone and air lock. In this system, wet material is input into hopper by screw feeder. Fuel furnace produces large volumn of hot air. Those hot air is driven into steel pipes, mixed with wet sawdust and moved through curving pipes and drying chamber by the power of fan blower. Fast moving hot air sustains and is mixed with raw material sent by spiral feeder in the suspending state through the steel pipe, moisture evaporates as the material traverses along the steel pipe and is rendered dry at teh discharge end. Humid air is continuously exhausted, thus the material is dried.
Technical Data:
Model
Capacity
Power
Weight
Moisture rate of powdery raw materials
HGJ-1
300kg/h
4.5kw
1100kg
under 30%
HGJ-2
400-500kg/h
5.5kw
2260kg
under 50%
HGJ-3
500-600kg/h
11kw
2280kg
under 30%
HGJ-4
700-900kg/h
15kw
3080kg
under 50%
Sawdust Drying Machine:
High Efficiency Fluidizing Dryer (GFG)
It is suitable for drying of granule and powder materials in pharmaceutical, foodstuff and chemistry industries.
Using screw to extrude, vibrate granule and to get themdry in a high speed way.Big granule, small block, particle with viscosity
Using screw to extrude, vibrate granule and to get themdry in a high speed way.Big granule, small block, particle with viscosity
High Efficiency Fly Ash Dryer
1.High Efficiency Fly Ash Dryer
2. Operate conveniently
3. High efficiency
4. High thermal efficiency
High Efficiency Fly Ash Dryer
Description:
Fly ash dryer applies to fly ash, phosphogypsum and titanium gypsum etc. industry dust, waste residue drying.Fly ash dryer is designed by the features of early moisture is higher than other materials; the proportion is less than other materials, big flow ability during dry process.
Features
:
1. With compact structure, small floor area, reliable working, low energy consumption, high thermal efficiency, material drying effect is good, easy to realize automation control, few operators.
2. Low air out temperature, dust removal equipment can be used long time.
3. Adopting new combined type raising device, according to users’ demand regulate and control the required eventually moisture target breezily.
relaxed regulation to end moisture indicators.
4. High degree of automation, easy operation, stable working.
5. Equipment investment is imported products 1/6, small investment, gains fast.
6. Equipment is new energy-saving products, it can energy saving about 20% than similar products.
7. Fuel can adapt to coal, oil, steam etc.
Mechanical structure and working principle:
1. Production techniques: It can be used to dry the fresh material from moisture content 65% to below 13% after the High temperature drying, disinfection, decomposition.
2. Drying product:
3.Rotary Drum dryer has a high degree of mechanization, large production capacity and continuous operation.
4. Structure was simple and excellent. Materials running smoothly through the cylinder’s resistance.The operating are convenient.
5. Low malfunction, lower maintenance cost, low power consumption.
6. Wide scope of application, good uniformity of drying products .When it is drying at the same time can achieve the purpose of sterilization and deodorization.
Main technical parameters
Model (mm)
Inclination (%)
Rotate speed (r/min)
Air inlet temperature (°C)
Power (kW)
Production capacity(t/h)
Weight (t)
600x6000
3-5
3-8
≤700
3
0.5-1.5
2.9
800x8000
3-5
3-8
≤700
4
0.8-2.0
3.5
800x10000
3-5
3-8
≤700
4
0.8-2.5
4.5
1000x10000
3-5
3-8
≤700
5.5
1.0-3.5
5.6
1200x10000
3-5
3-8
≤700
7.5
1.8-5
14.5
1200x12000
3-5
3-8
≤700
11
2-6
14.8
1500x12000
3-5
2-6
≤800
15
3.5-9
17.8
1800x12000
3-5
2-6
≤800
18
5-12
25
2200x12000
3-5
1.5-6
≤800
18.5
6-15
33
2200x18000
3-5
1.5-6
≤800
22
10-18
53.8
2200x20000
3-5
1.5-6
≤800
30
12-20
56
2. Operate conveniently
3. High efficiency
4. High thermal efficiency
High Efficiency Fly Ash Dryer
Description:
Fly ash dryer applies to fly ash, phosphogypsum and titanium gypsum etc. industry dust, waste residue drying.Fly ash dryer is designed by the features of early moisture is higher than other materials; the proportion is less than other materials, big flow ability during dry process.
Features
:
1. With compact structure, small floor area, reliable working, low energy consumption, high thermal efficiency, material drying effect is good, easy to realize automation control, few operators.
2. Low air out temperature, dust removal equipment can be used long time.
3. Adopting new combined type raising device, according to users’ demand regulate and control the required eventually moisture target breezily.
relaxed regulation to end moisture indicators.
4. High degree of automation, easy operation, stable working.
5. Equipment investment is imported products 1/6, small investment, gains fast.
6. Equipment is new energy-saving products, it can energy saving about 20% than similar products.
7. Fuel can adapt to coal, oil, steam etc.
Mechanical structure and working principle:
1. Production techniques: It can be used to dry the fresh material from moisture content 65% to below 13% after the High temperature drying, disinfection, decomposition.
2. Drying product:
3.Rotary Drum dryer has a high degree of mechanization, large production capacity and continuous operation.
4. Structure was simple and excellent. Materials running smoothly through the cylinder’s resistance.The operating are convenient.
5. Low malfunction, lower maintenance cost, low power consumption.
6. Wide scope of application, good uniformity of drying products .When it is drying at the same time can achieve the purpose of sterilization and deodorization.
Main technical parameters
Model (mm)
Inclination (%)
Rotate speed (r/min)
Air inlet temperature (°C)
Power (kW)
Production capacity(t/h)
Weight (t)
600x6000
3-5
3-8
≤700
3
0.5-1.5
2.9
800x8000
3-5
3-8
≤700
4
0.8-2.0
3.5
800x10000
3-5
3-8
≤700
4
0.8-2.5
4.5
1000x10000
3-5
3-8
≤700
5.5
1.0-3.5
5.6
1200x10000
3-5
3-8
≤700
7.5
1.8-5
14.5
1200x12000
3-5
3-8
≤700
11
2-6
14.8
1500x12000
3-5
2-6
≤800
15
3.5-9
17.8
1800x12000
3-5
2-6
≤800
18
5-12
25
2200x12000
3-5
1.5-6
≤800
18.5
6-15
33
2200x18000
3-5
1.5-6
≤800
22
10-18
53.8
2200x20000
3-5
1.5-6
≤800
30
12-20
56
High Efficiency Good Quality Sand Dryer
Sand Dryer
1.Large production volume
2.Wide application range
3.Small flow resistance
4. Convenient operation
Hot Sell China Made High Efficiency Sand Dryer
Rotary dryer
, also known as
rotary
drum
dryer
The Dryer is formed by rotary body, lifting blade, driving device, supporting device and sealing ring. It can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used. The Rotary Dryer is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical.
Rotary dryer
discription
rotary dryer
is
Widely used in building materials, metallurgy, chemicals, industrial drying slag cement limestone, coal, slag, clay and other materials
The aircraft mainly by the rotary, jan plate, transmission, seals, and other support equipment and components
The
rotary dryer
has a reasonable structure, well-produced, high yield, and low consumption, the advantages of operating convenience
Plant products quality assurance, highest free installation debugging agent can be checked with other plants than quality and prices
Main features of
rotary dryer
:
The
rotary dryer is
High degree of mechanization, large production capacity, continuous option
Simple and excellent structure, material running smoothly through the cylinder, operating convenience
Less mechanical failure, low maintain charge, low power consumption
Uniformity of drying product is good
rotary dryer
production line using a special scattered installations to ensure the dryer's drying effect
Use innovative and unique sealing device, and sophisticated keep-warm system
Thus reduce the coal consumption of the system effectively
The whole
rotary dryer
system holds a good performance of sealing
rotary dryer
also has a complete dust removal equipment
There is no dust spilling
It still has a good operating environment
The whole
rotary dryer
system uses electric centralized control, auto-control of temperature for hot air, high automation and convenient operation
Specifications of Drier
Specifications
(m)
Diameter of rotary body
(cm)
Length of rotary body
(m)
Angle of slope
(%)
Weight
(t)
Inlet temperature ()
Capacity
(t/h)
GZφ600×6000
φ600
6
3
2.9
≤700
0.5-1.5
GZφ800×8000
φ800
8
5
3.5
≤700
0.8-2.0
GZφ1000×9000
φ1000
9
5
5.2
≤700
0.8-2.5
GZφ1000×10000
φ1100
10
5-3
5.6
≤700
1.0-3.5
GZφ1200×10000
φ1200
10
3-5
14.04
≤700
1.8-5
GZφ1200×12000
φ1200
12
3-5
14.8
≤700
2-6
GZφ1500×12000
φ1500
12
3-5
17.76
≤800
3.3-7.5
GZφ1800×14000
φ1800
14
3-5
29
≤800
5-9
GZφ2200×12000
φ2200
12
3-5
33
≤700
6-12
GZφ2200×18000
φ2200
18
3-5
53.3
≤800
10-15
GZφ2200×20000
φ2200
20
3-5
56
≤800
15-25
GZφ3000×20000
Φ3000
20
3-5
78
≤800
25
GZφ3000×25000
Φ3000
25
3-5
104.9
≤800
32-36
1.Large production volume
2.Wide application range
3.Small flow resistance
4. Convenient operation
Hot Sell China Made High Efficiency Sand Dryer
Rotary dryer
, also known as
rotary
drum
dryer
The Dryer is formed by rotary body, lifting blade, driving device, supporting device and sealing ring. It can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used. The Rotary Dryer is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical.
Rotary dryer
discription
rotary dryer
is
Widely used in building materials, metallurgy, chemicals, industrial drying slag cement limestone, coal, slag, clay and other materials
The aircraft mainly by the rotary, jan plate, transmission, seals, and other support equipment and components
The
rotary dryer
has a reasonable structure, well-produced, high yield, and low consumption, the advantages of operating convenience
Plant products quality assurance, highest free installation debugging agent can be checked with other plants than quality and prices
Main features of
rotary dryer
:
The
rotary dryer is
High degree of mechanization, large production capacity, continuous option
Simple and excellent structure, material running smoothly through the cylinder, operating convenience
Less mechanical failure, low maintain charge, low power consumption
Uniformity of drying product is good
rotary dryer
production line using a special scattered installations to ensure the dryer's drying effect
Use innovative and unique sealing device, and sophisticated keep-warm system
Thus reduce the coal consumption of the system effectively
The whole
rotary dryer
system holds a good performance of sealing
rotary dryer
also has a complete dust removal equipment
There is no dust spilling
It still has a good operating environment
The whole
rotary dryer
system uses electric centralized control, auto-control of temperature for hot air, high automation and convenient operation
Specifications of Drier
Specifications
(m)
Diameter of rotary body
(cm)
Length of rotary body
(m)
Angle of slope
(%)
Weight
(t)
Inlet temperature ()
Capacity
(t/h)
GZφ600×6000
φ600
6
3
2.9
≤700
0.5-1.5
GZφ800×8000
φ800
8
5
3.5
≤700
0.8-2.0
GZφ1000×9000
φ1000
9
5
5.2
≤700
0.8-2.5
GZφ1000×10000
φ1100
10
5-3
5.6
≤700
1.0-3.5
GZφ1200×10000
φ1200
10
3-5
14.04
≤700
1.8-5
GZφ1200×12000
φ1200
12
3-5
14.8
≤700
2-6
GZφ1500×12000
φ1500
12
3-5
17.76
≤800
3.3-7.5
GZφ1800×14000
φ1800
14
3-5
29
≤800
5-9
GZφ2200×12000
φ2200
12
3-5
33
≤700
6-12
GZφ2200×18000
φ2200
18
3-5
53.3
≤800
10-15
GZφ2200×20000
φ2200
20
3-5
56
≤800
15-25
GZφ3000×20000
Φ3000
20
3-5
78
≤800
25
GZφ3000×25000
Φ3000
25
3-5
104.9
≤800
32-36
Subscribe to:
Posts (Atom)