High efficiency rotary dryer
1.High reliability
2.Energy-saving
3.Robust structure
4.More than15 years experience
High Efficiency Rotary Dryer
Rotary drier is widely used for drying materials in industries like cement, mine, building materials, chemistry, food and fertilizer, etc. This rotary drying machine comes with thermocouples on the feeding and discharging device to control the temperature. Thermometers are also adopted so as to better control the working temperature (generally 350-380°) of the rotary drier.
The Working Principle of high efficiency rotary dryer:
The auto-combustion device provides heat resource for our rotary drier, which adopts down-flow heating method. When the mineral materials are fed into the cylinder, it flows down as a result of gravity. Meanwhile, they are repetitively scattered in the air so that they are in full contact with the hot air. The material is thus dried gradually.
Technical Specification of Rotary Dryer
type(mm)
indiclination(%)
rotation speed(r/min)
input tempreture(ºC)
motor power(kw)
outpur(t/h)
weight(t)
GZΦ800×8000
5
7.5
≤700
4-6
0.8-2.0
3.5
GZΦ1000×10000
5
6.19
≤700
5.5-7.5
1.0-3.5
5.6
GZΦ1200×10000
5
5.3
≤700
11-13
1.8-5
14.04
GZΦ1500×12000
5
4.5
≤800
13-15
3.3-7.5
17.76
GZΦ1800×14000
5
3.3
≤800
18.5
5-9
29
GZΦ2200×120000
5
3.0
≤700
22
6-12
33
GZΦ2400×18000
5
2.5
≤800
30
10-15
53.3
Thursday, September 1, 2011
High Efficiency Rotary Dryer
Rotary dryer
1)capacity with smooth rotation
2)Low energy consumption, easy operation
3)ISO9001-2008
4)easy maintance
Rotary Dryer, also named revolving tube dryer, is used to dry slag, clay and other materials in construction, metallurgy, chemical, and cement industries.
The machine is made up of a rotating object, a winnowing board, a wheeling device,an upholding device,and a sealed circle.It has reasonable structure, high quality, and low energy cost. Being excellent workmanship, it is easy to operate.
Technical Specification of Rotary Dryer
type(mm)
indiclination(%)
rotation speed(r/min)
input tempreture(ºC)
motor power(kw)
outpur(t/h)
weight(t)
GZΦ800×8000
5
7.5
≤700
4-6
0.8-2.0
3.5
GZΦ1000×10000
5
6.19
≤700
5.5-7.5
1.0-3.5
5.6
GZΦ1200×10000
5
5.3
≤700
11-13
1.8-5
14.04
GZΦ1500×12000
5
4.5
≤800
13-15
3.3-7.5
17.76
GZΦ1800×14000
5
3.3
≤800
18.5
5-9
29
GZΦ2200×120000
5
3.0
≤700
22
6-12
33
GZΦ2400×18000
5
2.5
≤800
30
10-15
53.3
1)capacity with smooth rotation
2)Low energy consumption, easy operation
3)ISO9001-2008
4)easy maintance
Rotary Dryer, also named revolving tube dryer, is used to dry slag, clay and other materials in construction, metallurgy, chemical, and cement industries.
The machine is made up of a rotating object, a winnowing board, a wheeling device,an upholding device,and a sealed circle.It has reasonable structure, high quality, and low energy cost. Being excellent workmanship, it is easy to operate.
Technical Specification of Rotary Dryer
type(mm)
indiclination(%)
rotation speed(r/min)
input tempreture(ºC)
motor power(kw)
outpur(t/h)
weight(t)
GZΦ800×8000
5
7.5
≤700
4-6
0.8-2.0
3.5
GZΦ1000×10000
5
6.19
≤700
5.5-7.5
1.0-3.5
5.6
GZΦ1200×10000
5
5.3
≤700
11-13
1.8-5
14.04
GZΦ1500×12000
5
4.5
≤800
13-15
3.3-7.5
17.76
GZΦ1800×14000
5
3.3
≤800
18.5
5-9
29
GZΦ2200×120000
5
3.0
≤700
22
6-12
33
GZΦ2400×18000
5
2.5
≤800
30
10-15
53.3
2011 New Generation Rotary Dryer
2011 New generation rotary dryer
1.High reliability
2.Energy-saving
3.Robust structure
4.More than15 years experience
2011 New Generation Rotary Dryer
Rotary drier is widely used for drying materials in industries like cement, mine, building materials, chemistry, food and fertilizer, etc. This rotary drying machine comes with thermocouples on the feeding and discharging device to control the temperature. Thermometers are also adopted so as to better control the working temperature (generally 350-380°) of the rotary drier.
The Working Principle of 2011 New generation rotary dryer:
The auto-combustion device provides heat resource for our rotary drier, which adopts down-flow heating method. When the mineral materials are fed into the cylinder, it flows down as a result of gravity. Meanwhile, they are repetitively scattered in the air so that they are in full contact with the hot air. The material is thus dried gradually.
Technical Specification of Rotary Dryer
type(mm)
indiclination(%)
rotation speed(r/min)
input tempreture(ºC)
motor power(kw)
outpur(t/h)
weight(t)
GZΦ800×8000
5
7.5
≤700
4-6
0.8-2.0
3.5
GZΦ1000×10000
5
6.19
≤700
5.5-7.5
1.0-3.5
5.6
GZΦ1200×10000
5
5.3
≤700
11-13
1.8-5
14.04
GZΦ1500×12000
5
4.5
≤800
13-15
3.3-7.5
17.76
GZΦ1800×14000
5
3.3
≤800
18.5
5-9
29
GZΦ2200×120000
5
3.0
≤700
22
6-12
33
GZΦ2400×18000
5
2.5
≤800
30
10-15
53.3
1.High reliability
2.Energy-saving
3.Robust structure
4.More than15 years experience
2011 New Generation Rotary Dryer
Rotary drier is widely used for drying materials in industries like cement, mine, building materials, chemistry, food and fertilizer, etc. This rotary drying machine comes with thermocouples on the feeding and discharging device to control the temperature. Thermometers are also adopted so as to better control the working temperature (generally 350-380°) of the rotary drier.
The Working Principle of 2011 New generation rotary dryer:
The auto-combustion device provides heat resource for our rotary drier, which adopts down-flow heating method. When the mineral materials are fed into the cylinder, it flows down as a result of gravity. Meanwhile, they are repetitively scattered in the air so that they are in full contact with the hot air. The material is thus dried gradually.
Technical Specification of Rotary Dryer
type(mm)
indiclination(%)
rotation speed(r/min)
input tempreture(ºC)
motor power(kw)
outpur(t/h)
weight(t)
GZΦ800×8000
5
7.5
≤700
4-6
0.8-2.0
3.5
GZΦ1000×10000
5
6.19
≤700
5.5-7.5
1.0-3.5
5.6
GZΦ1200×10000
5
5.3
≤700
11-13
1.8-5
14.04
GZΦ1500×12000
5
4.5
≤800
13-15
3.3-7.5
17.76
GZΦ1800×14000
5
3.3
≤800
18.5
5-9
29
GZΦ2200×120000
5
3.0
≤700
22
6-12
33
GZΦ2400×18000
5
2.5
≤800
30
10-15
53.3
High Efficiency Rotary Drying Machinery with CE
High Efficiency Rotary Drying Machinery with CE
1.Good quality
2.High efficiency
3.Compact structure
4.Stable Performance
High Efficiency Rotary Drying Machine with CE
Introduction
1, It is professionally designed for drying different kinds of wood sawdust
2, has a reasonable structure, well-produced, high yield, and low consumption, the advantages of operating convenience
3, High degree of mechanization, large production capacity, continuous option
4, Simple and excellent structure, material running smoothly through the cylinder, operating convenience
5, With reliable performance, that high efficiency on heat power, Uniform on dry, less time on cleaning machine.
6, Strong resistance to overload, operating smoothly and high reliability
Specification
Model
Power, KW
Capacity, MT/day
Water content
Weight, MT
Dimensions, meter
HJ-9
6.6
15-25
20-70%
2.6
12×2.0×4.5
1.Good quality
2.High efficiency
3.Compact structure
4.Stable Performance
High Efficiency Rotary Drying Machine with CE
Introduction
1, It is professionally designed for drying different kinds of wood sawdust
2, has a reasonable structure, well-produced, high yield, and low consumption, the advantages of operating convenience
3, High degree of mechanization, large production capacity, continuous option
4, Simple and excellent structure, material running smoothly through the cylinder, operating convenience
5, With reliable performance, that high efficiency on heat power, Uniform on dry, less time on cleaning machine.
6, Strong resistance to overload, operating smoothly and high reliability
Specification
Model
Power, KW
Capacity, MT/day
Water content
Weight, MT
Dimensions, meter
HJ-9
6.6
15-25
20-70%
2.6
12×2.0×4.5
High Efficiency Rotary sand dryer
High Efficiency Rotary sand dryer
1,this machine is widly used for industry,farm and building
2,decressde the water
High Efficiency Rotary sand dryer
Brief introduction of Rotary Sand dryers
Rotary Sand dryers
is Ruiguang's major product, so professional technology support and all-around service can be offered to you
Rotary Sand dryers
is handling by bringing it into direct contact with a heated gas
Dryer is made up of a large rotating cylindrical tube, the dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under
Working principle of RotarySand dryers:
Material to be dried enters the dryer and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer, when the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls
This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow) or toward the feed end from the discharge end (known as counter-current flow)
The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer, alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated, when the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type, often, indirect heated dryers are used when product contamination is concern
Rotary Sand Dryer Structure
Material to be dried enters the drier, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow)-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern
The product specification
Production capacity(T/H)
The main motor
Weight(T)
Power(KW)
Model
1.0 × 10m
0.5-1
5.5
Y132M2-6
10.5
1.2×10m
1-2
7.5
Y160M-6
13.5
1.5×12m
2-5
11
Y160L-6
18.9
1.5×15m
4-6
15
Y180L-6
21
1.8×12m
5-8
18.5
Y200L1-6
22.83
2.2×12m
6-10
18.5
Y200L1-6
37.6
2.2×14m
7-12
18.5
Y200L1-6
40
2.2×16m
9-14
30
Y225M-6
45
2.4×14m
10-16
30
Y250M-6
51
2.4×18m
12-18
37
Y250M-6
54
2.4×20m
14-22
37
Y250N-6
54.14
3.0×20m
16-25
55
Y250M-4
78
3.0×25m
32-36
75
YR280M-4
104.9
1,this machine is widly used for industry,farm and building
2,decressde the water
High Efficiency Rotary sand dryer
Brief introduction of Rotary Sand dryers
Rotary Sand dryers
is Ruiguang's major product, so professional technology support and all-around service can be offered to you
Rotary Sand dryers
is handling by bringing it into direct contact with a heated gas
Dryer is made up of a large rotating cylindrical tube, the dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under
Working principle of RotarySand dryers:
Material to be dried enters the dryer and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer, when the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls
This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow) or toward the feed end from the discharge end (known as counter-current flow)
The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer, alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated, when the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type, often, indirect heated dryers are used when product contamination is concern
Rotary Sand Dryer Structure
Material to be dried enters the drier, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow)-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern
The product specification
Production capacity(T/H)
The main motor
Weight(T)
Power(KW)
Model
1.0 × 10m
0.5-1
5.5
Y132M2-6
10.5
1.2×10m
1-2
7.5
Y160M-6
13.5
1.5×12m
2-5
11
Y160L-6
18.9
1.5×15m
4-6
15
Y180L-6
21
1.8×12m
5-8
18.5
Y200L1-6
22.83
2.2×12m
6-10
18.5
Y200L1-6
37.6
2.2×14m
7-12
18.5
Y200L1-6
40
2.2×16m
9-14
30
Y225M-6
45
2.4×14m
10-16
30
Y250M-6
51
2.4×18m
12-18
37
Y250M-6
54
2.4×20m
14-22
37
Y250N-6
54.14
3.0×20m
16-25
55
Y250M-4
78
3.0×25m
32-36
75
YR280M-4
104.9
High Efficiency Sawdust Drying Machine
High Efficiency Sawdust Drying Machine, Sawdust drying machine
1. Used to dry sawdust
2. Hot air circle inside pipes
High Efficiency Sawdust Drying Machine, Sawdust drying machine
1.Moisture reducing is 8%-12%
2.equipped with one hot air boiler
3.drying raw material with moisture content less than 20-25
Model
Productivity
size of ouline (m)
diameter of feed in(mm)
Motor power
TY-1
600-800 kg/h
10*1.0*2.0 M
less than5
5.5 kw
TY-2
1000-1400 kg/h
15*1.2*2.5 M
less than5
7.5 kw
1. Used to dry sawdust
2. Hot air circle inside pipes
High Efficiency Sawdust Drying Machine, Sawdust drying machine
1.Moisture reducing is 8%-12%
2.equipped with one hot air boiler
3.drying raw material with moisture content less than 20-25
Model
Productivity
size of ouline (m)
diameter of feed in(mm)
Motor power
TY-1
600-800 kg/h
10*1.0*2.0 M
less than5
5.5 kw
TY-2
1000-1400 kg/h
15*1.2*2.5 M
less than5
7.5 kw
High Efficiency Tower Dryer(ISO9001:2008)
Tower Dryer
1.low cost,
2.low consumption,
3.high capacity,
4.easy operation and maintenance, etc.
High Efficiency Tower Dryer(ISO9001:2008)
1. Brief introduction of Tower Dryer:
Vertical drying equipment, also called vertical dryer, is designed for the dehydration of briquette and pellet. It has reasonable design, high thermal efficiency, good drying effect and adjustable air volume.
This type of vertical dryer is made of steel structure; inner lining adopts heat preservation materials to keep warm; multilayer high temperature castings are adopted in the roaster; there are vibration system, interception system, temperature control system and intelligent control system installed on some relevant parts of the machine; vapor and smoke are collected with the application of a draught fan and a cyclone dust collector.
2.Working principle of Tower Dryer
:
It adopts vertical equipment and steel shell, lined with insulation material to prevent losing the heat and multi-layer high-temperature kiln casting which are overlapping with each other. All relevant parts including the uppe, middle and lower parts are designed with several group of vibrating, closure, temperature-control and intelligent system. And therefore, water vapor and smoke can be absorbed by the dust collector. Materials enter from the top of the elevator, slip evenly down to the bottom through the powder mill and vibrating feeder of its own internal dynamic diameter, and exchange with the rising hot air currents reversely, and thus are dried layer by layer. Eventually, qualified materials are unloaded by electric vibrating motor and transported to the designated place by belt conveyor where they are needed.
3.Main Technical Parameters:
model
Original moisture
Eventually moisture
Standard coal consumption
(kg/t)
Capacity (t/h)
Electricity consumption (kw/t)
weight (t)
LH-2012
25%
2%
6~7.8
8~10
2~3
17
LH-2014
25%
2%
7~8.6
9~12
1.8~2.6
19
LH-2016
25%
2%
8~11
10~14
1.6~2.2
21
LH-2216
25%
2%
9~12
12~15
1.5~2.1
26
LH-2218
25%
2%
10~13
14~16
1.5~2.0
28
LH-2220
25%
2%
11~13.8
15~17
1.4~1.8
30
LH-2222
25%
2%
13~15
16~19
1.4~1.6
32
LH-2516
25%
2%
17~22
18~26
1.4~1.6
38
LH-3018
25%
2%
22~27
23~32
1.4~1.8
45
1.low cost,
2.low consumption,
3.high capacity,
4.easy operation and maintenance, etc.
High Efficiency Tower Dryer(ISO9001:2008)
1. Brief introduction of Tower Dryer:
Vertical drying equipment, also called vertical dryer, is designed for the dehydration of briquette and pellet. It has reasonable design, high thermal efficiency, good drying effect and adjustable air volume.
This type of vertical dryer is made of steel structure; inner lining adopts heat preservation materials to keep warm; multilayer high temperature castings are adopted in the roaster; there are vibration system, interception system, temperature control system and intelligent control system installed on some relevant parts of the machine; vapor and smoke are collected with the application of a draught fan and a cyclone dust collector.
2.Working principle of Tower Dryer
:
It adopts vertical equipment and steel shell, lined with insulation material to prevent losing the heat and multi-layer high-temperature kiln casting which are overlapping with each other. All relevant parts including the uppe, middle and lower parts are designed with several group of vibrating, closure, temperature-control and intelligent system. And therefore, water vapor and smoke can be absorbed by the dust collector. Materials enter from the top of the elevator, slip evenly down to the bottom through the powder mill and vibrating feeder of its own internal dynamic diameter, and exchange with the rising hot air currents reversely, and thus are dried layer by layer. Eventually, qualified materials are unloaded by electric vibrating motor and transported to the designated place by belt conveyor where they are needed.
3.Main Technical Parameters:
model
Original moisture
Eventually moisture
Standard coal consumption
(kg/t)
Capacity (t/h)
Electricity consumption (kw/t)
weight (t)
LH-2012
25%
2%
6~7.8
8~10
2~3
17
LH-2014
25%
2%
7~8.6
9~12
1.8~2.6
19
LH-2016
25%
2%
8~11
10~14
1.6~2.2
21
LH-2216
25%
2%
9~12
12~15
1.5~2.1
26
LH-2218
25%
2%
10~13
14~16
1.5~2.0
28
LH-2220
25%
2%
11~13.8
15~17
1.4~1.8
30
LH-2222
25%
2%
13~15
16~19
1.4~1.6
32
LH-2516
25%
2%
17~22
18~26
1.4~1.6
38
LH-3018
25%
2%
22~27
23~32
1.4~1.8
45
Subscribe to:
Posts (Atom)