High Quality Dryer Widely Use
1.high quality
2. simple structure
3.easy oparate dryer
type:dryer
High Quality Dryer Widely Use
1.Sawdust Dryer is suitable for dry the grain, sawdust, etc small granular materials. It can dry the raw materials quickly and with higher capacity.
1. For raw materials with heavy humidity which is above 12%, you need to install a Dryer before further processing. This Air Current Type Dryer can reduce the humidity of wood materials below 12% per time. The Cost of this Air Current Dryer is much lower than Rotary Dryer.
2. It is professionally designed for drying different kinds of wood sawdust. It has advantages of low cost, low consumption, high capacity, easy operation and maintenance, etc. In addition, the round places of pipes can be changed to any angle which can save space and solve plant dimension limitation.
3. Regarding FR-I and HGJ-II Type Dryer ,it is suitable to process materials which moisture content between 20%-25%.It can reduce the MS to 8%-12% one drying time.
4. Regarding FR- II it is suitable to process materials which moisture content between 35%-50%.It can reduce the humidity to 8%-12% one drying time. That means it can reduce approx.30% for one drying time. But if the humidity of materials is lower than 35%, the capacity will be increased with less of fuel.
5. All of round places can be adjusted to any angle of 360 centigrade degree according to operation request. Clients can change the angle of dryers base on the production field.
III. Technical Data of the sawdust dryer
pictures of High Quality Dryer Widely Use
parameters of High Quality Dryer Widely Use
Model
JX- I Type Dryer (with one stove)
JX- II Type Dryer (with two stoves)
Capacity
250-300(Kg/hour)
300-500 (Kg/hour)
Size of Input material (Diameter) mm
< 3 & < 5
< 5
Temperature of Hot Air
180°C~250°C
180°C~250°C
Power (KW)
5.5
7.5
Gross/Net Weight(Kg)
1300/1200
1800/1700
contact details
s
Wednesday, August 31, 2011
High Quality Drying Equipment for many materials
Drying Equipment
1.cost-effective, low profit
2.environemental machine
3.better quality
Qiangyuan Drying Equipment
1.Usage
This machine is widely used in mine, building materials, chemical, metallurgy, cast industries and so on. It can dry the material such as sand, slag, clay, fly ash, coal, iron power, quartz sand, and ore and so on.
2. Feature
(1).Adopting the heat change technology, this machine has the advantage of high efficiency and less energy consumption.
(2).The efficiency of self heat preservation is higher than 80%, for single cylinder type, it is 35%
(3).Compared with the single cylinder type with same capacity, the 3cylinder type only cover the 50% ground. It will save the 50% of building cost, 60% power cost, and above 60%fuel.
(4).The fuel can be coal, oil and gas.
(5).With the heat resisting, hear wearing alloy steel plates, its life is 4 times as the common steel plates.
(6).The water content of the product is less than 0.5%
(7).The temperature of out air is low, and it will increase the life of the dust catching system.
(8).Without the big and small gears, it work with riding wheel.
(9).The temperature of out air is low, and it will increase the life of dust catching system.
(1)0. Simple operation, it is easy to adjust the date of the water content of the product.
Note: any change of technical date will not inform additionally.
1.cost-effective, low profit
2.environemental machine
3.better quality
Qiangyuan Drying Equipment
1.Usage
This machine is widely used in mine, building materials, chemical, metallurgy, cast industries and so on. It can dry the material such as sand, slag, clay, fly ash, coal, iron power, quartz sand, and ore and so on.
2. Feature
(1).Adopting the heat change technology, this machine has the advantage of high efficiency and less energy consumption.
(2).The efficiency of self heat preservation is higher than 80%, for single cylinder type, it is 35%
(3).Compared with the single cylinder type with same capacity, the 3cylinder type only cover the 50% ground. It will save the 50% of building cost, 60% power cost, and above 60%fuel.
(4).The fuel can be coal, oil and gas.
(5).With the heat resisting, hear wearing alloy steel plates, its life is 4 times as the common steel plates.
(6).The water content of the product is less than 0.5%
(7).The temperature of out air is low, and it will increase the life of the dust catching system.
(8).Without the big and small gears, it work with riding wheel.
(9).The temperature of out air is low, and it will increase the life of dust catching system.
(1)0. Simple operation, it is easy to adjust the date of the water content of the product.
Note: any change of technical date will not inform additionally.
Tuesday, August 30, 2011
High Quality Drying Equipment used for many kinds of materials
Drying Equipment
1.cost-effective, low profit
2.environemental machine
3.better quality
Qiangyuan Drying Equipment
1.Usage
This machine is widely used in mine, building materials, chemical, metallurgy, cast industries and so on. It can dry the material such as sand, slag, clay, fly ash, coal, iron power, quartz sand, and ore and so on.
2. Feature
(1).Adopting the heat change technology, this machine has the advantage of high efficiency and less energy consumption.
(2).The efficiency of self heat preservation is higher than 80%, for single cylinder type, it is 35%
(3).Compared with the single cylinder type with same capacity, the 3cylinder type only cover the 50% ground. It will save the 50% of building cost, 60% power cost, and above 60%fuel.
(4).The fuel can be coal, oil and gas.
(5).With the heat resisting, hear wearing alloy steel plates, its life is 4 times as the common steel plates.
(6).The water content of the product is less than 0.5%
(7).The temperature of out air is low, and it will increase the life of the dust catching system.
(8).Without the big and small gears, it work with riding wheel.
(9).The temperature of out air is low, and it will increase the life of dust catching system.
(1)0. Simple operation, it is easy to adjust the date of the water content of the product.
Note: any change of technical date will not inform additionally.
1.cost-effective, low profit
2.environemental machine
3.better quality
Qiangyuan Drying Equipment
1.Usage
This machine is widely used in mine, building materials, chemical, metallurgy, cast industries and so on. It can dry the material such as sand, slag, clay, fly ash, coal, iron power, quartz sand, and ore and so on.
2. Feature
(1).Adopting the heat change technology, this machine has the advantage of high efficiency and less energy consumption.
(2).The efficiency of self heat preservation is higher than 80%, for single cylinder type, it is 35%
(3).Compared with the single cylinder type with same capacity, the 3cylinder type only cover the 50% ground. It will save the 50% of building cost, 60% power cost, and above 60%fuel.
(4).The fuel can be coal, oil and gas.
(5).With the heat resisting, hear wearing alloy steel plates, its life is 4 times as the common steel plates.
(6).The water content of the product is less than 0.5%
(7).The temperature of out air is low, and it will increase the life of the dust catching system.
(8).Without the big and small gears, it work with riding wheel.
(9).The temperature of out air is low, and it will increase the life of dust catching system.
(1)0. Simple operation, it is easy to adjust the date of the water content of the product.
Note: any change of technical date will not inform additionally.
High Quality GZ Drier
1. High Quality GZ Drier
2.widespread use
3.industrial drying machine capacity 0.8-15 t/h
4.low consumpution
High Quality GZ Drier specifications
1.The rotary drier ,also known as rotary drying machine ,is a kind of drier handling large quantities of materials.
2.
The
High Quality GZ Drier
has a variety of advantages such as reliable operation,,flexiability,large capacity,so ,it is widely used in metallurgy,building materials,food,chemical industry,medicine and mining industry.
High Quality GZ Drier technical parameter
model(mm)
speed(r/min)
gradient
(%)
intake air
temperature
capacity (t/h)
weight(t)
GZΦ800*8000
3.8
5
≤700
0.8-20
3.5
GZΦ1000*10000
3.8
5
≤700
1.0-3.5
5.6
GZΦ1200*10000
3
3
≤700
1.8-5
14.5
GZΦ1500*14000
2.08
5
≤800
3.3-7.5
17.8
GZΦ1800*14000
2.08
5
≤800
5-9
22
GZΦ2200*16000
4.7
5
≤700
6-12
36
GZΦ2400*18000
4
5
≤800
10-15
52
2.widespread use
3.industrial drying machine capacity 0.8-15 t/h
4.low consumpution
High Quality GZ Drier specifications
1.The rotary drier ,also known as rotary drying machine ,is a kind of drier handling large quantities of materials.
2.
The
High Quality GZ Drier
has a variety of advantages such as reliable operation,,flexiability,large capacity,so ,it is widely used in metallurgy,building materials,food,chemical industry,medicine and mining industry.
High Quality GZ Drier technical parameter
model(mm)
speed(r/min)
gradient
(%)
intake air
temperature
capacity (t/h)
weight(t)
GZΦ800*8000
3.8
5
≤700
0.8-20
3.5
GZΦ1000*10000
3.8
5
≤700
1.0-3.5
5.6
GZΦ1200*10000
3
3
≤700
1.8-5
14.5
GZΦ1500*14000
2.08
5
≤800
3.3-7.5
17.8
GZΦ1800*14000
2.08
5
≤800
5-9
22
GZΦ2200*16000
4.7
5
≤700
6-12
36
GZΦ2400*18000
4
5
≤800
10-15
52
High Quality Grain Dryer at Low Price
Grain Dryer
1.High thermal efficiency
2. High product capacity
3. Low energy consumption
4. Simple excellent Structure
High Quality Grain Dryer at Low Price
Introduction of Grain Dryer:
Downstream and counter flow grain dryer is the one of the most advanced grain drying equipment. It was firstly researched by my company in the domestic which also won the State Science and Technology Progress Award. Downstream and counter flow grain dryer adopted the combination drying process of "downstream - upstream", according to heating temperature implement "sub-temperature dry" of the food drying tower, there is a tempering part between the drying section, "drying - tempering "alternately.
It adopts high air temperature to heat up food quickly in the top of the drying section, and take away part of the surface water; intermediate drying air temperature off the middle section with large amounts of water; through the above paragraph, after drying, the temperature of food grains has increased, so the bottom of the drying section can be achieved using low temperature food particles off in stronger adhesion of the water within it to avoid the purpose of grain temperature too high; last through the cooling section of the full cooling, to achieve safe water and the temperature of food can be a machine Direct storage. The drying tower will be "downstream", "counter-current" use optimize drying process to achieve optimal results, the company is a fine grain drying tower models.
Grain dryer performance characteristic:
1, Single plane open-air use, windproof rainproof.
2, The mechanized continued operation, the stable property, the ease of operation, saves the construction to invest.
3, Adaptiveness, may give dual attention dries the multi-variety grain.
4, The afterheat recycling use, reduces the energy consumption.
5, The grain heat-drying is thorough, is even, the drying grain may go into storage directly.
6, After drying, the grain quality is good, does not have the pollution
Main Technical Parameters of grain Dryer:
Type
SNH5
SNH7.5
SNH10
SNH15
SNH20
SNH25
Processing capacity
(t/day)
100
150
200
300
400
500
Drying rate (%)
4~16
Heating medium
Clean Air
Hot blast temperature (°C)
< 120
The maximum heating temperature of grain(°C)
55
Nonuniformity of drying (%)
< 2
Fragmentation rate of value-added (%)
< 0.5
Unit heat consumption
(kj/kgH2O)
5800
Coal consumption (standard) (kg/h)
60~230
90~345
120~460
180~690
240~1000
300~1380
Installed capacity
According to the environment, conditions, precipitation rate and the configuration
Host Dimensions (M)
2.5×2
2.5×2.5
3×2.5
4×3
4×4
5×4
1.High thermal efficiency
2. High product capacity
3. Low energy consumption
4. Simple excellent Structure
High Quality Grain Dryer at Low Price
Introduction of Grain Dryer:
Downstream and counter flow grain dryer is the one of the most advanced grain drying equipment. It was firstly researched by my company in the domestic which also won the State Science and Technology Progress Award. Downstream and counter flow grain dryer adopted the combination drying process of "downstream - upstream", according to heating temperature implement "sub-temperature dry" of the food drying tower, there is a tempering part between the drying section, "drying - tempering "alternately.
It adopts high air temperature to heat up food quickly in the top of the drying section, and take away part of the surface water; intermediate drying air temperature off the middle section with large amounts of water; through the above paragraph, after drying, the temperature of food grains has increased, so the bottom of the drying section can be achieved using low temperature food particles off in stronger adhesion of the water within it to avoid the purpose of grain temperature too high; last through the cooling section of the full cooling, to achieve safe water and the temperature of food can be a machine Direct storage. The drying tower will be "downstream", "counter-current" use optimize drying process to achieve optimal results, the company is a fine grain drying tower models.
Grain dryer performance characteristic:
1, Single plane open-air use, windproof rainproof.
2, The mechanized continued operation, the stable property, the ease of operation, saves the construction to invest.
3, Adaptiveness, may give dual attention dries the multi-variety grain.
4, The afterheat recycling use, reduces the energy consumption.
5, The grain heat-drying is thorough, is even, the drying grain may go into storage directly.
6, After drying, the grain quality is good, does not have the pollution
Main Technical Parameters of grain Dryer:
Type
SNH5
SNH7.5
SNH10
SNH15
SNH20
SNH25
Processing capacity
(t/day)
100
150
200
300
400
500
Drying rate (%)
4~16
Heating medium
Clean Air
Hot blast temperature (°C)
< 120
The maximum heating temperature of grain(°C)
55
Nonuniformity of drying (%)
< 2
Fragmentation rate of value-added (%)
< 0.5
Unit heat consumption
(kj/kgH2O)
5800
Coal consumption (standard) (kg/h)
60~230
90~345
120~460
180~690
240~1000
300~1380
Installed capacity
According to the environment, conditions, precipitation rate and the configuration
Host Dimensions (M)
2.5×2
2.5×2.5
3×2.5
4×3
4×4
5×4
High Quality Horizontal Kiln
Horizontal Kiln
1.15 years experience
2.Manufacturer of Horizontal Kiln
3.Low cost
4.Energy saving
High Quality Horizontal Kiln
1.Description of
Horizontal Kiln
Horizontal Kiln
can be divided into metallurgy
Horizontal Kiln
, chemical engineering
Horizontal Kiln
, and building material
Horizontal Kiln
according to its different dealing materials.
(1)The building material
Horizontal Kiln
is mainly used in calcining clinker cement, limestone and porcelain granule.
(2)Metallurgy
Horizontal Kiln
is mainly used for the magnetizing calcining of lean iron ore in iron and steel plant in metallurgy industry, the chromites and josephinite oxidizing calcining , calcining of dewalquite and clinker aggregate and aluminum hydroxide roasting in aluminum factory;
(3)Chemical engineering
Horizontal Kiln
is used in chemical plant for chromium ore and chromium ore powder roasting. The building material limestone
Horizontal Kiln
( activity limestone kiln ) is used for calcining activity lime and dolomite in iron and steel plant and ferroalloy works.
2.Features of
Horizontal Kiln
(1)Through technological innovation, our
Horizontal Kiln
is designed with international leading wheel catch device, high precision plunger metering pump, high accuracy speed control valve and contact graphite block sealing device, etc.
(2)In order to improve machinery automation, an industrial computer is used for showing the calcining condition, and a fluorescent screen is adopted for showing the simulated process flows. An infrared scanner is utilized for transmitting the calcining condition to the computer.
(3)Comparing with other similar cement production equipment, the operation rate of our
Horizontal Kiln
increased by 10%, production increased by 5%-10% and heat consumption decreased by 15%.
3.The Technical Parameters of Horizontal Kiln
Specifications
(m)
The size of the kiln
Capacity
(t/h)
Speed
(r/min)
Power (kw)
Weight
(t)
Diameter (m)
Length (m)
Gradient (%)
φ1.9×39
1.9
39
4
1.65-3
0.29-2.93
30
77.59
φ2.0×40
2
40
3
2.5-4
0.23-2.26
37
119.1
φ2.2×45
2.2
45
3.5
3.4-5.4
0.21-2.44
45
128.3
φ2.5×40
2.5
40
3.5
9.0-10.5
0.44-2.44
55
149.61
φ2.5×50
2.5
50
3
6.25-7.4
0.62-1.86
55
187.37
φ2.5×54
2.5
54
3.5
6.9-8.5
0.48-1.45
55
196.29
φ2.7×42
2.7
42
3.5
10.0-11.0
0.10-1.52
55
198.5
φ2.8×44
2.8
44
3.5
12.5-13.5
0.437-2.18
55
201.58
φ3.0×45
3
45
3.5
12.8-14.5
0.5-2.47
75
210.94
φ3.0×48
3
48
3.5
25.6-29.3
0.6-3.48
100
237
φ3.0×60
3
60
3.5
12.3-14.1
0.3-2
100
310
φ3.2×50
3.2
50
4
40.5-42
0.6-3
125
278
Note:
The above imformation is just for reference,if you want know more about our products, please feel free to contact us!
1.15 years experience
2.Manufacturer of Horizontal Kiln
3.Low cost
4.Energy saving
High Quality Horizontal Kiln
1.Description of
Horizontal Kiln
Horizontal Kiln
can be divided into metallurgy
Horizontal Kiln
, chemical engineering
Horizontal Kiln
, and building material
Horizontal Kiln
according to its different dealing materials.
(1)The building material
Horizontal Kiln
is mainly used in calcining clinker cement, limestone and porcelain granule.
(2)Metallurgy
Horizontal Kiln
is mainly used for the magnetizing calcining of lean iron ore in iron and steel plant in metallurgy industry, the chromites and josephinite oxidizing calcining , calcining of dewalquite and clinker aggregate and aluminum hydroxide roasting in aluminum factory;
(3)Chemical engineering
Horizontal Kiln
is used in chemical plant for chromium ore and chromium ore powder roasting. The building material limestone
Horizontal Kiln
( activity limestone kiln ) is used for calcining activity lime and dolomite in iron and steel plant and ferroalloy works.
2.Features of
Horizontal Kiln
(1)Through technological innovation, our
Horizontal Kiln
is designed with international leading wheel catch device, high precision plunger metering pump, high accuracy speed control valve and contact graphite block sealing device, etc.
(2)In order to improve machinery automation, an industrial computer is used for showing the calcining condition, and a fluorescent screen is adopted for showing the simulated process flows. An infrared scanner is utilized for transmitting the calcining condition to the computer.
(3)Comparing with other similar cement production equipment, the operation rate of our
Horizontal Kiln
increased by 10%, production increased by 5%-10% and heat consumption decreased by 15%.
3.The Technical Parameters of Horizontal Kiln
Specifications
(m)
The size of the kiln
Capacity
(t/h)
Speed
(r/min)
Power (kw)
Weight
(t)
Diameter (m)
Length (m)
Gradient (%)
φ1.9×39
1.9
39
4
1.65-3
0.29-2.93
30
77.59
φ2.0×40
2
40
3
2.5-4
0.23-2.26
37
119.1
φ2.2×45
2.2
45
3.5
3.4-5.4
0.21-2.44
45
128.3
φ2.5×40
2.5
40
3.5
9.0-10.5
0.44-2.44
55
149.61
φ2.5×50
2.5
50
3
6.25-7.4
0.62-1.86
55
187.37
φ2.5×54
2.5
54
3.5
6.9-8.5
0.48-1.45
55
196.29
φ2.7×42
2.7
42
3.5
10.0-11.0
0.10-1.52
55
198.5
φ2.8×44
2.8
44
3.5
12.5-13.5
0.437-2.18
55
201.58
φ3.0×45
3
45
3.5
12.8-14.5
0.5-2.47
75
210.94
φ3.0×48
3
48
3.5
25.6-29.3
0.6-3.48
100
237
φ3.0×60
3
60
3.5
12.3-14.1
0.3-2
100
310
φ3.2×50
3.2
50
4
40.5-42
0.6-3
125
278
Note:
The above imformation is just for reference,if you want know more about our products, please feel free to contact us!
High Quality Lignite Dryer with ISO Certificate
Rotary Dryer
1.High thermal efficiency
2. High product capacity
3. Low energy consumption
4. Simple Structure
High Quality Lignite Dryer with ISO Certificate
Rotary dryer
is handling by bringing it into direct contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under.
Working principle of the rotary dryer:
Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.
Main technical parameters of dryer:
model
The diameter
The length
Slope(°)
Speed
Power
Volume
(mm)
(m)
(r/min)
(kw)
(m3)
0.6×8-12
600
8-12
3-5
8
4
2.26
0.8×10-10
800
10-12
3-5
7.2
4
5.02
1.0×10-12
1000
10-12
3-5
6.73
5.5
7.85
1.2×12-18
1200
12-18
3-5
5.8
11-15
13.31
1.5×12-18
1500
12-18
3-5
4.8
15-22
21.2
1.8×12-18
1800
12-18
3-5
3.2
185-30
48.22
2.2×12-22
2200
12-22
3-5
3
22-30
70.43
2.8×15-24
2800
15-24
3-5
2.59
30-55
147.8
1.High thermal efficiency
2. High product capacity
3. Low energy consumption
4. Simple Structure
High Quality Lignite Dryer with ISO Certificate
Rotary dryer
is handling by bringing it into direct contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under.
Working principle of the rotary dryer:
Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.
Main technical parameters of dryer:
model
The diameter
The length
Slope(°)
Speed
Power
Volume
(mm)
(m)
(r/min)
(kw)
(m3)
0.6×8-12
600
8-12
3-5
8
4
2.26
0.8×10-10
800
10-12
3-5
7.2
4
5.02
1.0×10-12
1000
10-12
3-5
6.73
5.5
7.85
1.2×12-18
1200
12-18
3-5
5.8
11-15
13.31
1.5×12-18
1500
12-18
3-5
4.8
15-22
21.2
1.8×12-18
1800
12-18
3-5
3.2
185-30
48.22
2.2×12-22
2200
12-22
3-5
3
22-30
70.43
2.8×15-24
2800
15-24
3-5
2.59
30-55
147.8
Subscribe to:
Posts (Atom)